That's what I don't understand about these attacks, I didn't even have a sister growing up but my mom would have a box of tampons next to the toilet. I remember wondering what they were..... And that was it. For years I used the bathroom next to tampons and it had zero impact on life.
Team aluminum all the way. A higher up where I work is obsessed with stainless steel, he gets these monstrous heavy duty tables made out of SS that hold objects 1/3 of their weight. Makes lab rearranging a nightmare lol.
Fucking terrifying form of life, I remember seeing this on Animal Planet as a kid. The whole cycle is fascinating, thank god it doesn't fuck with the birds brains. Can you imagine a parasite trying to pilot an avian? Reiteration: fucking terrifying.
I don't like Harris, mainly because of her time as a prosecutor. I'm also not going to lie, I was having a really really hard time grappling with voting for Biden, I was begrudgingly willing to before the debate but when I watched it I was so outraged. I genuinely feel like his administration has been deceitful with his condition for a while. I'm not saying I wasn't going to vote for Biden, I understand the stakes, but I kept watching his interviews trying to get any genuine motivation for Biden. All I saw was a stubborn old man who refused to even acknowledge reality.
I've been following Biden news and this week I was convinced that he would drop out and so I wondered who would replace him. Harris immediately came to mind. Now as I said I don't care for Harris but before Biden announced this today I personally decided I would be willing to support Harris.
She isn't ancient, I believe she's more progressive, and I think she will be good in the debates. She isn't my 1st, 2nd, 3rd, or even 4th pick, but I have far fewer hangups voting for Harris compared to Biden, and of course over Trump.
She isn't the best candidate in terms of absolute popularity, but when you factor in funding logistics and the fact that I think many good Dems picks would want to run in '28 when the timing isn't fucked, I think Harris is the most realistic pick. I'll happily take her compared to Biden.
Fuck yeah love the satire, I lost so much respect for JB over how he handled kyle glass's comment. Tenacious D is one of my favorite sleepover movies from when I was a kid.
Because Trump performed exactly how he has in every previous debate, I'm not saying it was good but it was the same shit level of performance that I expected.
Biden performed horrendously compared to expectations, that's why he gets the focus. Trump lying his ass off just isn't news anymore, I'm not justifying it but it would have been stranger if he hadn't.
I know Trump shouldn't get a pass but the reason Biden is getting so much focus and Trump isn't is pretty obvious. Trump did as Trump does and Biden had a horrible performance.
Uvalde was a tragedy but this has absolutely no merit
I've been trying to help kick start this community off. This is my first time really posting, I was always a lurker. I was trying to think of things I could post about daily and was planning to do an in-depth series of guides on ball vapes(which I will continue to generate). The problem I have with that is ball vapes are still very new, with them still pretty early in development there many dents to hammer out. They don't appeal to everyone and it's 100% understandable, I was turned off by the complexity when I first saw them and pretty much wrote them off (glad I looked back into them though). So I wanted to try to throw posts up on a variety of dry herb vaporizering topics, this one will appeal to people who want a heavy hitter ball vape adjacent device without any of the downsides of ball vapes. The Vapor Brothers VB1.5 I DON'T OWN THIS DEVICE
At a Glance
+Safe, very shielded from burning anything
+Can leave on all day
+3 ball materials (zirconia, alumina, or boro glass) and 2 ball size options 3 or 4mm
+Can retrofit VB1.0
-Hits very hard but not as hard as a ball vape
-once you select your material it doesn't look easy to change it out
-Can't set exact temp, uses dial instead
-Can't have a portable head, will be entirely desktop
This is basically just the OG Vapor Brothers desktop but they changed the steam to include balls that you choose (see above for materials/size) so it seems like a hybrid ball vape/desktop device. Reviews seem solid, people report it hits almost as hard as ball vapes. This seems like a great middle ground bridging desktop and ball vapes, unlike ball vapes though this is a plug and play device with little to no safety concerns comparatively. It looks like you can pick them up for around $300 depending on what you choose, not a bad price point imo. You could get cheaper ballers but you could also get way more expensive ones. They can also retrofit an old VB1.0 and convert it to the VB1.5 for $125 which I thought was pretty neat. I don't think the stems/balls can be easily changed out but I could be dead wrong on that and of course no things that are for ball vapes will work with this. The only other downside I see to this is no precise temp control, other than this looks like a phenomenal device!
Image from vaporbrothers.com/VB15
I saw this picture of the internal heating elements of the mighty. I hadn't seen it before so I wanted to share!
Pretty neat: you can see the thermocouple in the bottom left of the heating chamber to track temp, the air path spirals up the element picking up convective heat, and you can see the hottest spot is in contact with the herb bowl which gives it the conductive heating. Superbly designed device!
I cleaned my glass for the weekend (ignore down stem haha) and wanted to share a picture of my daily driver setup! Just a TM2, glass bowl with 14mm connector, and an Orb water piece. I hope everyone is having a relaxing weekend!
There was a lot of speculation and no confirmation, this is confirmation
So there was some speculation whether Valve delisted the 177 (now 180) countries to protect itself legally or if Sony had done it for Sony reasons. It appears that Sony has been confirmed to be the one who delisted it
So I've used portables for years and desktops a few times. The last couple years I've kept reading about ball vapes and they sounded cool but honestly I got intimidated and stopped looking into it. There are so many options and components and you have to worry about compatibility etc.... Well I hope to make a series of posts addressing all of this to help other people be more comfortable approaching getting a ball vape!
At a glance, what is a ball vape? Simply put a ball vape heats up an e-nail, that then heats up a metal or glass housing, that houses hundreds of 2-4mm balls (where the name comes from). These balls are made from materials that have good heat retention properties, silicon carbide(SiC), ruby (corundum), alumina, zirconia, and many more. These balls heat up as well and when you draw air though the balls the air heats up and passes though the herb vaporizering it.
What's the benefits? The reason small 2-4mm balls or jewels(lil diamond shapes) are used is because they have a large surface area compared to larger (5+mm) shapes and you can get a higher packing density(more balls/volume). This heats the air passing though very uniformly, leading to a much more uniform extraction (less green and black ABV). It also allows for a very open airpath, while being able to maintain temperature. The housing and balls (often referred to as a head assembly) have a huge thermal mass so you can rip the hell out of a ball vape and the heat will keep up! A ball vape offers a one hit extraction from flower, kinda like dabbing flower if that makes sense.
There are three main components you need to start a ball vape setup:
-PID controller
-a coil that is compatible with the PID
-a head assembly that fits the above coil and balls
The rest is a bowl, bong, and any adapters you want. These depend on injector vs difussion style but that goes past the scope of this post.
All of this is just a very general picture of a ball vape written as succinctly as possible. I will dive much deeper into the setups, parts, and adapters in future posts.
Image from tools420 site in comments, I just wrote over it.
Just a quick guide to help anyone understand some of the differences between conduction and convection vaporizers. Hopefully it helps people make informed decisions on what types of vapes they want!
At a glance:
Convection
+More even extraction
+Better flavor
+Lower combustion risk
+Better for on demand large rips
+Less stirring needed
Conduction
+Larger clouds
+Better heat retention
+Designs are more compact
+Cheaper
+Better for long vape session/ sharing
What's the difference?
Conductive heating is heat that is transferred though being in physical contact between solid objects. Thus a conductive vape is a vape where flower is in direct contact with a heat source.
By contrast convective heating is heat that is transferred though gases. Thus convective heating heats the air that then travels through and heats the flower.
Most portables and devices in general are hybrids where some part of the bowl heats up and the air that passes though the herb is heated, the mighty perfect example of a hybrid device. Pure devices exist of course, the Tinymight 2 is purely convection. Pure conduction is a little rarer or at least I haven't personally come across as many pure conduction devices, I believe the starry 4 is a pure conduction portable.
*That is not my picture, I got it from the Wikipedia page on heat transfer.
God I love Larian, I hope they never go public
There are levels to that suck though
For USPS they have a list of verified hemp vendors, they tried a couple years ago to open packages suspected of marijuana without a warrant. The outcome was it doesn't matter if they suspect it, you still have to get a warrant. So now if a vendor is a certified hemp vendor they can't touch it. Now UPS and FedEx are private companies so they can do pretty much whatever they want, that's why almost all hemp shipments go through USPS. I'm paraphrasing a lot but that's the gist of it. USPS is currently and has been the largest drug dealer in the country, even with omitting hemp because with the volume they process you could never catch them all and every other drug doesn't have a pungent smell like weed.
The night vance cometh