cross-posted from: https://lemmy.ml/post/20403604

if you're a long time PC games pirate, I'd like to divert your attention to an area you probably haven't looked at (I know I haven't) - Playstation 3.

you're free to look up its history, but in short, it's tech that premiered in 2006, so def on the old side. nevertheless, it's still in active use with game development reaching into 2017.

the kicker here is - it's almost flawlessly jailbreakable, allowing you to play anything that was produced for it, including games for PS1 and PS2! two caveats: a) I haven't registered nor used a PSN account, as I see no value in it so no idea if network play works and b) I only tried 15 or so games.

they can be had in the $30-50 range, the older models (fat and earlier slim) being preferable because they support the persistent hack, while later slims and superslims are less so, but still hackable with a non-persistent hack (you need to patch it every time it powers on).

the hack is super easy and straightforward and involves no hardware mods of any kind - it wouldn't hurt to clean and repaste a 20 year old device, though. the new hack with the custom firmware (CFW) is persistent, so it's there forever unless you decide to flash the original firmware (OFW).

because it's such an old platform there isn't super active resistance from sony towards the hack scene, so you should be good on that front for many, many moons. in contrast, the rare PS4 hacks are quickly patched and rendered useless, even though it's pretty ancient tech from 2012.

I stumbled onto one by chance, found a broken device sans Blu-Ray drive, seemingly useless for normies. thanks to the super-active community at psx-place, I was able to resurrect it, flash the latest 4.91 CFW with a noBD patch, got me a fake sixaxis game pad and an old 500 GB drive and everything works beautifully!

you can get games from dedicated "ROM" sites as well as torrents; I'm not overly familiar with the malware situation but I doubt it's a serious concern. the games can be transferred over the network using plain ol' FTP, copied from USB drives or even played directly from those. although it was the primary method of game distribution, I haven't needed the BD once. there are mods with store-like interfaces that allow you to directly download games from the internet and install them to the disk. also, DLNA is supported, I managed to play movies from my Jellyfin server!

although it won't hurt it, SSD are probably overkill. the SATA1 interface it has is congruent with transfer speeds of mechanical drives, so you're fine with repurposing one of those, as they can be had for next to nothing; max size is 1.5TB.

I've gotten a cheap sixaxis clone; cost me $10 NiB and it works. I don't know if I suck at playing dynamic games because it's shit or because I plain suck (never played with a gamepad before), that remains to be seen. I'm def not buying an original because they cost like $50+, and I'm not getting them used because yuck - who knows who sweated on them and what else they did with it.

a word of warning - you shouldn't spend a ton of money on them because it's decade+ old tech that's on the uptick part of a bathtub curve. the graphics chips they had, especially the early models, are prone to die and repair isn't viable.

it took me a while to piece together all the info as I've never had any interactions with consoles of any kind, let alone the hack aspects of it. if you're similarly challenged, ask away here or on ps3piracy and I'll try to help!

if you're a long time PC games pirate, I'd like to divert your attention to an area you probably haven't looked at (I know I haven't) - Playstation 3.

you're free to look up its history, but in short, it's tech that premiered in 2006, so def on the old side. nevertheless, it's still in active use with game development reaching into 2017.

the kicker here is - it's almost flawlessly jailbreakable, allowing you to play anything that was produced for it, including games for PS1 and PS2! two caveats: a) I haven't registered nor used a PSN account, as I see no value in it so no idea if network play works and b) I only tried 15 or so games.

they can be had in the $30-50 range, the older models (fat and earlier slim) being preferable because they support the persistent hack, while later slims and superslims are less so, but still hackable with a non-persistent hack (you need to patch it every time it powers on).

the hack is super easy and straightforward and involves no hardware mods of any kind - it wouldn't hurt to clean and repaste a 20 year old device, though. the new hack with the custom firmware (CFW) is persistent, so it's there forever unless you decide to flash the original firmware (OFW).

because it's such an old platform there isn't super active resistance from sony towards the hack scene, so you should be good on that front for many, many moons. in contrast, the rare PS4 hacks are quickly patched and rendered useless, even though it's pretty ancient tech from 2012.

I stumbled onto one by chance, found a broken device sans Blu-Ray drive, seemingly useless for normies. thanks to the super-active community at psx-place, I was able to resurrect it, flash the latest 4.91 CFW with a noBD patch, got me a fake sixaxis game pad and an old 500 GB drive and everything works beautifully!

you can get games from dedicated "ROM" sites as well as torrents; I'm not overly familiar with the malware situation but I doubt it's a serious concern. the games can be transferred over the network using plain ol' FTP, copied from USB drives or even played directly from those. although it was the primary method of game distribution, I haven't needed the BD once. there are mods with store-like interfaces that allow you to directly download games from the internet and install them to the disk. also, DLNA is supported, I managed to play movies from my Jellyfin server!

although it won't hurt it, SSD are probably overkill. the SATA1 interface it has is congruent with transfer speeds of mechanical drives, so you're fine with repurposing one of those, as they can be had for next to nothing; max size is 1.5TB.

I've gotten a cheap sixaxis clone; cost me $10 NiB and it works. I don't know if I suck at playing dynamic games because it's shit or because I plain suck (never played with a gamepad before), that remains to be seen. I'm def not buying an original because they cost like $50+, and I'm not getting them used because yuck - who knows who sweated on them and what else they did with it.

a word of warning - you shouldn't spend a ton of money on them because it's decade+ old tech that's on the uptick part of a bathtub curve. the graphics chips they had, especially the early models, are prone to die and repair isn't viable.

it took me a while to piece together all the info as I've never had any interactions with consoles of any kind, let alone the hack aspects of it. if you're similarly challenged, ask away here or on ps3piracy and I'll try to help!

I guess this should be an appropriate community, participants possibly on the older side... so, I only recently got my first gamepad. played with keyboard and mouse up until then.

so, with a couple of games I tried (tomb raiders, uncharted, NFS, etc) it's kinda going but I suck at anything that needs fast responses, like aiming and hitting moving enemies; don't think I'd have any trouble with a mouse.

so I guess my question is - any old timers around that got good at this late in their gaming career?

have issues with my feet in the metatarsal region. no idea if it's temporary or there for good. just checking if this means no running for me ever or are folks out there running with this condition. thanks.

I know some wobble is OK, but is this too much wobble on the rear axle? replaced the axle and the bearings, greased them up, screwed all into place. can't remember what it was before I replaced it, am I good here?

found a Playstation 3 (model CECHH04) by the dumpster. cleaned it up and inspected - it's missing the BD and the HD and its cage; I jammed a normal 2.5" HDD in there and stuck some cardboard around. the light turned green, the HD spins up, the fans are spinning and the TV shows it's alive - no OS though.

I've downloaded Sony's official firmware and also some evilnat CFW jailbreak; tried both but the prompt on the TV is to attach a controller to the USB and press the PS button, which I haven't got. can I do something without it? tried a noname PC gamepad and keyboard but no go...

anyone got Chromecast with Google TV 4K working with Jellyfin? it runs Android TV, gets the Jellyfin app and then stuff starts breaking.

It can't connect to the server intermittently, playback stutters, stops, breaks... the server reports the file is direct play and no issues.

Five other devices have no problems of any kind, only this fucker has spells constantly.

anyone managed to attach a monitor to a Poco F1 or Oneplus 6/6T?

can someone explain leverage to me as practised by those RE ~~bullshitters~~ finfluencers. I feel their whole spiel is just bullshit but I don't know enough to be sure about it.

according to them, you "buy" a home - you put X% down and pay your first monthly (and then post on r/firsttimehomebuyer). then you go to (another?) bank and say "look I got this house I wanna use as collateral" and they go "wow you own a house! sure, have this bag of money"... repeat until you "own" like a city block.

like, how does that not crash and burn at the first step, just a cursory glance at the asset's status? how are they not "lol you ain't got no house dumbass come back in 20 years when you actually own it"?

I want to create a minimal install for mpv playback through jellyfin-mpv-shim and macast. this is going to be a base for a FOSS media sink akin to a Chromecast. you attach it to your TV and it plays whatever you send it, like movies from your jellyfin server and youtube/vimeo/piped/etc videos. otherwise, there's no interaction with it, it doesn't handle input (remotes, mice, keyboards, etc.), it's controlled via apps (jellyfin android and allcast).

I've already made a proof-of-concept device running debian 12 with Plasma and it (mostly) works. now I'd like to trim the fat and install only what's absolutely necessary as I currently only have a 2006 macbook with busted screen and GMA950 with a mechanical HD. I'm gonna go with LAN only so I don't have to dick around with broadcom WLAN.

what do I need in terms of DEs and/OR WMs? do I need those at all? I seem to remember that I could run firefox in kiosk mode without anything else but X11, could I run mpv like that? or possibly wayland? what would be the absolute minimum package-wise to achieve this?

to reiterate, it's only going to display full-screen mpv when there's video to play, no menus, navigation, nada. possibly some slideshow-while-idle thingy in the future if it doesn't add too much in terms of software needed, but not right now.

I hate spending money on hardware when there's a software solution. like, I've got a subwoofer from a 2.1 system (without satellites) for free. instead of sourcing speakers for it, however cheap they might be, I'll just utilize the speakers from my monitor. pipewire to the rescue, it creates a combined sink that outputs sound to both DP and analog audio, et voila - a 2.1 sound system. people are like "your monitor sounds like that!?" and usually I play dumb: "yeah, yours doesn't? well that's linux for ya".

so, I have a desktop and a laptop and I'd like to share the same monitor, keyboard, and mouse. modern monitors have a KVM switch integrated, you connect your keyboard/mouse/etc. to it, one USB Type-C cable to the laptop, a couple to the desktop and you have a seamless switch; it even charges the laptop, how cool is that!

however, my monitor works just fine and I don't replace my hardware unless I really have to. USB KVMs with similar functions aren't cheap. also, the monitor already has multiple display inputs so I got to thinking, how do I re-create this with no money, or as little as possible, with DIY tech?

first, switching the display; this one took me no time at all. I have a USB Type-C to DP cable (with DP-Alt) and with the power of udev (detect a connection then trigger stuff) and ddcutil (sends commands to the monitor) I got it working as seamless as possible - I connect the laptop and it automagically switches the monitor over. when I disconnect it, the monitor falls back to an active connection, which is the desktop. awesome!

now how about switching the keyboard and mouse over? I'd like to do it in software, like barrier/inputleap does it but without having to move the cursor to the adjacent monitor. also, both machines are on wayland which isn't supported. eventual input lag to the laptop is unimportant, I game on the desktop. no idea if that can be accomplished or if that's even a thing...

that is a thing - it's called USB/IP, i.e. sharing your USB device over TCP/IP; it's a kernel module included by default for a long time now and that thing rocks! not only does the USB keyboard work without any perceivable lag on the laptop, it get's "disconnected" from the host, so your keypresses aren't disturbing the host. since it's a kernel module, no need to convince wayland to play ball! this also works for webcams, scanners, readers, etc., the client system thinks this is a local device and it just works.

so all we have to do is expand the shell script to bring over the keyboard and mouse along with switching over the monitor once the USB-C connection is detected annnd... success!

well, sorta. my wireless mouse is second-hand and I haven't got the USB receiver for it, so it connects over bluetooth. tried sharing with usbip and it works, but the radio connection gets interrupted or something and the mouse doesn't work there. maybe there's a workaround but I don't want to dig further.

also, how do I switch back to the desktop to shoot some peggies? I don't want to disconnect the laptop manually so I could come up with a slew of shell scripts and udev triggers and I'd also need a ssh tunnel, I don't want my keyboard input to travel over the LAN in cleartext, etc... kinda cumbersome. also, once the novelty wears off, the automagicallity gets tired, I'd prefer manually switching between devices with a keyboard combo.

enter rkvm. it's written in rust and as everybody knows that's super awesome. unlike usbip, comms are encrypted, so no sniffing possible, and hotkey switching is a default function, and it also handles the mouse!

now, rkvm currently doesn't support triggers, like "do X when hotkey combo pressed", but Plasma can handle running the monitor switch script on each device separately by listening to the same hotkey combo.

both solutions have their advantages and disadvantages, usbip requires more legwork but is more powerful whereas rkvm is simpler and easier to set up.

the final step, powering the laptop over the same cable. sadly, can't handle that in software, but there are power delivery injectors out there, some as cheap as $7. also, there's this cool project, looks easy enough to source and implement. not sure if I'm going that way or just go with a used dock station, as those can be had for a song for popular business ex-flagships, like the Thinkpad T-series, HP Elitebooks, Dell Latitudes, etc..

are there downsides? sure there are. numero uno, the host (desktop, in my case) has to be on all the time. not a big deal for me, it gets woken in the morning and suspended late at night. there are edge cases when rkvm geeks out, but for a thing that's in its 0.x version, this is more than usable.

so, I've been using this setup for the past week or so and haven't yet found it to break or have any negative side-effects. gaming on the desktop is as snappy (or shitty) as ever and using my mech keyboard and giant screen on the laptop allows me to easily compartmentalize my business and private stuff.

thanks for reading!

edit: edited title to clarify I'm talking about a Keyboard-Video-Mouse switch, not a Kernel-Virtual-Machine.