You can revert some of the changes such as bringing bottom bar back from app's settings
mrvictory1
joined 2 years ago
This is exactly why I love duckduckgo's AI results built in to search. It appears when it is relevant (and yes you can nuke it from orbit so it never ever appears) and it always gives citations (2 websites) so I can go check if it is right or not. Sometimes it works wonders when regular search results are not relevant. Sometimes it fails hard. I can distinguish one from the other because I can always check the sources.
Me who stores important data on seagate external HDD with no backup reading the comments roasting seagate:
I had a gaming laptop whose CPU jumped to 92C immediately on load, the vendor replaced the heatsink + copper wires to solve the problem, the cooling system might be problematic instead of the CPU / mobo
I had to pull up ADB so my samsung would stop recommending me disney plus, a preinstalled app called "AppCloud" has an undismissable notification that offers you sponsored apps.
I have seen the other way around, a friend had Steam installed on their Linux PC but Proton was off and she didn't know what it was.
Not for specific hardware but you can sign in to ProtonDB with your steam account and get an overview of your entire steam library. For online games there is areweanticheatyet.com, you will have to check games manually. AMD, Nvidia (9xx and newer) and Intel iGPUs (Skylake and newer) have roughly the same compatibility, performance differs usually favoring Windows on Nvidia.
I used it when I used arch linux on a PC with 4GB RAM and an HDD. Enlightenment loaded up in no time compared to even sway, looked pretty and had quite a few features like not terminating session if there are open apps and wallpapers per workspace! Its native apps like file manager and terminology were also extremely snappy. Using E apps felt like I had an NVME instead of HDD and I felt like I had a full desktop instead of a minimalistic WM without sacrificing speed. Switched away when I got a PC with good specs overall & a real NVME and iirc the desktop was crashing every now and then on the new PC. The default UI is very weird, you need to place most of the app icons by yourself and I think pressing Meta doesn't invoke the app launcher? Also I cannot start E with wayland currently, I could on v0.21.
I facepalmed
And you can post a BBForums emoji?
Here is the past network setup:
- Main Router (192.168.1.2) -> Ethernet Switch -> Multiple Ethernet cables connected to wall
- Wall -> Second Router (192.168.1.1)
- Wall -> PC
After a blackout we thought the switch was no longer working so we replaced it with another router. The problem is the router has too few ports, not every room gets ethernet. The ethernet switch works in this configuration:
- Main Router -> Third Router (Wi-Fi disabled) -> Ethernet cable connected to wall -> Wall -> Ethernet Splitter -> PC Under either of these configurations PC detects network but cannot reach 192.168.1.1, 192.168.1.2 or WWW:
- Main Router -> Ethernet Switch -> PC
- Main Router -> Ethernet Switch -> Ethernet cable connected to wall -> Wall -> PC
Windows reports "Unidentified network", Linux tries to connect for a minute then fails. I knwo the PC isn't bad because other devices also fail to connect. Even if I set up a static IP I cannot reach a local IP. 2nd router has IP address 192.168.1.1 because it refuses to use anything else, first router is assigned different IP so these two don't conflict.
Update: For testing I removed router 2, (the one I use as an extender / wireless AP) set router 1's IP address to 192.168.1.1. I tried connecting Router 1 to Router 3 (with DHCP disabled) and Router 3 (used as a switch) to PC via cables. It worked. Then I replaced Router 3 with the switch, network detected but no Internet. So even with the simplest possible setup and one DHCP server I had no network.
My original problem was Router 3 had too few ports and not all rooms got Ethernet access. Router 3 is above Router 1 and connects to cables coming out from the wall that provide Ethernet to rooms. I recalled that WAN cable of Router 1 is too short so I cannot lift it to connect to cables, turns out that's not the case. So I lifted Router 1 and I could connect a cable to provide Ethernet for one more room which is what I needed. Routers 1 are 3 are held mid air with Ethernet cables.
I previously mentioned that the switch works if it is connected to a wall plug in a room and it still works that way. Anyways here is the final setup:
- Hardware: Intel Core i3-6100U, 8 GiB RAM, Intel HD 520
- Software: Fedora Linux 40, Proton 8, Mesa 24.1.6
- Game Settings: DX12, frame gen off, FSR, everything on low/off, 720p windowed with %100 resolution.
Game did not start before renaming folder Engine/Plugins/Runtime/Nvidia. I was stuck at a black screen. I obviously did not expect good performance, I just wanted to see if I could run the benchmark.
Installing OS, 10 years ago:
Windows: click a couple of buttons enter username and password
Linux: Terminal hacking, downloading shell scripts from github
Installing OS today:
Linux: click a couple of buttons, enter username and password
Windows: Terminal hacking, downloading shell scripts from github.
Link to video: https://m.youtube.com/watch?v=qKRmYW1D0S0
Us Lemmings seem to be more interested in memes than the actual thing.
view more: next ›
My intel mac's cpu (i5-5250U) throttles to maintain 105 C