USB-C and Thunderbolt docks/hubs are a huge mess.

Around a year ago I was searching for a solid single-cable solution for my M1 Max MacBook Pro to hook up to an external monitor, ethernet and peripherals - and best case a decent audio jack.

The MacBook supports Thunderbolt 4 so I thought I might as well go for a Thunderbolt 4 dock (as opposed to a "normal" USB-C dock), but oh boy.

First, there was the problem of display outputs. I thought I'd just get a dock with two DisplayPort ports. But there are a lot of differences. Some are DisplayPort 1.4, some only 1.2. And some use MST (multi stream transport) to support both ports; which macOS does not support. Thunderbolt 4 does support two distinct streams of DisplayPort though, so in theory docks could exist with two DisplayPort ports, each with their own dedicated stream/signal.

Long story short, there were basically no docks with these specifications. So it became clear to me early in the selection process that would need to act as a hub that has multiple Thunderbolt outputs, so I can simply use USB-C to DisplayPort cables. This seems to be the best solution anyways, as the dock doesn't limit you in DisplayPort version or feature set this way.

So I looked for a Dock with 2-3 Thunderbolt outputs, Power Delivery, USB-A, gigabit ethernet and an audio jack.

There's the Razer Thunderbolt 4 dock for example. Has all required ports, provides 90 watts of power to the computer and (at least in color "Mercury"), looks the part. Bought it, plugged it in, connected a display via USB-C to DisplayPort cable. So far, so good. USB-A seems to be working.

So, what are the problems? Well. Firstly, the ethernet controller is connected to the internal USB controller. This also means it shares bandwidth and when hammering the USB controller, doesn't only mean bandwidth is throttled, but also that latency can be affected and spike seemingly randomly (like you're on wifi). There are also reportedly some issues with USB ethernet when waking up from sleep, but this might be related to macOS. Anyways, use f* PCIe based ethernet in your 300,-€ dock!

Next problem was something I couldn't believe got through QA. When audio starts playing via the audio jack, the right channel starts playing immediately, but the left channel starts after I'd say around a 200-300ms delay. This is VERY irritating, especially with headphones. As I said I couldn't believe it so I tried other devices including Windows 10 and 11 notebooks, and they all showed the exact same issue with this dock.

I found out that the problem goes away or is at least reduced when you set audio output to 24-bit in Windows. That's not how it works in macOS though (I know you can set something in some MIDI audio setting app, but that didn't help). So you're basically stuck. It's so insane to me that this glaring and obvious issue went through QA.

Then I thought okay, it's just Razer being Razer and ordered alternative docks. Turns out THEY ARE ALL THE SAME CRAP INSIDE. Sonnet Echo 11, i-tec whatever, Kensington. If it has a similar port layout to the Razer dock, it's likely that it's the exact same crap with the only difference being the odd USB-A port more or less and slightly different PD wattage.

There's a highly praised 400,-€ dock from CalDigit, but availability was bad at the time.

I ended up getting an Anker dock for around 170,-€, which simply has 3 Thunderbolt 4 outputs and a single USB-A output. I connected a simple USB-A hub so I can connect keyboard, mouse and USB DAC and mic for audio. I use the Thunderbolt outputs for DisplayPort via USB-C and the Apple Thunderbolt (1) Gigabit Ethernet adapter plugged into an Apple Thunderbolt 2 to Thunderbolt 3 adapter, and that's plugged into the dock. You wouldn't believe that this abomination of adapter chaos works a million times better than this USB ethernet crap.

Now, this setup works but it's super ugly and messy on the desk.

Nowadays I'm using some HP monitor with USB-C which has built-in ethernet and USB-A ports. It's honestly not a great solution (and functionally worse than my solution above), but it's simple and doesn't clutter your desk with 3-4 different boxes and 10 cables.

Unbelievable.