274
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
this post was submitted on 10 Apr 2024
274 points (97.6% liked)
Open Source
31759 readers
315 users here now
All about open source! Feel free to ask questions, and share news, and interesting stuff!
Useful Links
- Open Source Initiative
- Free Software Foundation
- Electronic Frontier Foundation
- Software Freedom Conservancy
- It's FOSS
- Android FOSS Apps Megathread
Rules
- Posts must be relevant to the open source ideology
- No NSFW content
- No hate speech, bigotry, etc
Related Communities
- !libre_culture@lemmy.ml
- !libre_software@lemmy.ml
- !libre_hardware@lemmy.ml
- !linux@lemmy.ml
- !technology@lemmy.ml
Community icon from opensource.org, but we are not affiliated with them.
founded 5 years ago
MODERATORS
Fusion360
Tried out FreeCad/Ondsel, and just couldn't get it to cooperate. Trying to do even basic changes would constantly result in errors/crashes. I spent maybe two weeks trying to make a single model. Then I tried making the same model in Fusion360 and was done in an half an hour. Granted, there is a huge difference in experience level here between these pieces of software, but still.
So I think my best bet for now is a jailbroken copy of Fusion360.
@Olgratin_Magmatoe
There are currently some changes on the way. They fundamentally solve the Topo-Naming-Problem I propose to try again after the next release.
I don`t know the #Onsel fork. In what way does it differ from #Freecad or Freecad from #realthunder?
@ClearCutCoconut
@michel @Olgratin_Magmatoe @ClearCutCoconut
1/2
@Olgratin_Magmatoe @ClearCutCoconut I'm very sorry for your bad user experience! What you've described, sounds like some basic user errors which would've been easily solved by sticking to good modeling practices. To be honest, these aren't always easy to follow / learn in the first place. If you're interested, have a look at the wiki: https://wiki.freecad.org/Feature_editing#Advice_for_creating_stable_models
#FreeCAD #fc3d
The most egregious issue I had was in trying to loft between two faces, such that the curve between the faces was a 3D one.
In Fusion360, it's pretty damn simple, you click the first face, ctrl+ click the second, then select the loft option. Then it's pretty much done.
In FreeCad/Ondsel, in trying to look up a tutorial to see how such an operation is normally done, the only tutorial that got me remotely close was this one.
https://www.youtube.com/watch?v=fv53D00KdGQ
Following the tutorial would lead to errors, crashes, and even if it had worked, it is such a painful way to do this operation.
So this isn't simply an issue with bad modeling practices. Maybe it's a terrible tutorial and there is better options out there. But the ease in which it is possible to do this task in Fusion360 should be the gold standard.