[-] nicerdicer2@sh.itjust.works 23 points 3 months ago

Es geht einfach darum, den börsendotierten Konzernen und den großen Arbeitgebern weiterhin hohe Gewinneinnahmen zu generieren, als Kompensation für geringere Abstätze ihrer Produkte.

Es geht ja anscheinend nicht darum, produktiver, also effizienter zu arbeiten, sondern einfach eine noch längere Zeitspanne als sonst schon irgendwelche sinnlosen Bullshit-Arbeiten zu verrichten. Ginge es um Produktivität oder Effizienz, dann würde man bessere Werkzeuge, modernere Ausrüstung etc. bereitstellen. Dies würde aber bedeuten, dass man was investieren müsste, was den momentanen Gewinn in diesem Fall aber schmälert.

Die Leute aber mehr arbeiten zu lassen, kann man quasi umsonst haben. Die geleisteten Überstunden werden dann halt aus irgendwelchen Gründen nicht anerkannt - zumindest kann ich mir so etwas in vielen Jobs vorstellen, bei denen der Arbeitnehmer ungelernt und somit schnell austauschbar ist. Arbeitnehmer, die um ihren Wert wissen, oder eine gefragte Qualifikation haben, werden so etwas nicht so leicht mit sich machen lassen. Darum bleibt auch der öffentliche Aufschrei aus.

[-] nicerdicer2@sh.itjust.works 20 points 3 months ago

Back in the 90s our school had one room with a permantently installed TV set. Class was taking part in this room once a week. When we all behaved - and we did! - we were allowed to watch MTV in this room for the last remaining 15 minutes of the lesson. It was the time where boy groups and Euro Dance music was at its peak. For us 5th or 6th-graders this was the most important thing every week.

2

What do you do when you have a pretty comfortable swivel chair but want to move it around like an office chair? You bulid a six wheel flatbed trailer for it.

The swivel chair is attached with zip ties so it could be removed any time without damage to the chair. Now the chair has two functions: swinging/ swivelling and moving around. The part underneath the chair can be used as additional storage space as it moves around with the whole contraption.

1
292
19

How jumping spiders reveal an entire secret world of colors.

[-] nicerdicer2@sh.itjust.works 36 points 4 months ago

What a waste of resources. Millions of devices will now add to the landfill, despite nothing is wrong with them in terms of technical funtionality. Just because Spotify wants them do be discontinued.

It should be law that when a manufacturer decides on discontinuing an otherwise fully functional product in such way, they should be forced to publish the source code of the software used for the respective device as well as any other resources for free so that users of these devices at least have a chance to repurpose it.

This also stands for any "smart" / internet-of-things-devices where the main functionality is reliing on the operation of a server. When the servers discontinue their services your device is basically a brick with no other functionality.

[-] nicerdicer2@sh.itjust.works 19 points 4 months ago

Leider wird auch hier nichts passieren. Im Zeit-Online-Artikel beteuert der Betreiber des Lokals zwar:

"Wir distanzieren uns von jeder Art von Rassismus und Diskriminierung." Jeder Gast, unabhängig von seiner Ethnie, sei herzlich willkommen, bekräftigen sie. Die Teilnehmer der Gruppe bekämen Hausverbot.

jedoch gibt es einen Kommentar unter dem Artikel, der genau das Gegenteil behauptet.

So schreibt der Nutzer "Stonki":

Hier eine Tripadvisor Bewertung aus Sommer 2017: Fremdenhass purJuli 2017 ... Wir saßen im Außenbereich der Bar. Unweit von uns der Chef des Hauses. Alle mit guter Stimmung bis zu dem Moment als der Hausherr lauthals anfing - kurz vor schreien könnte es auch treffen - über Türken zu reden. Seine Weltanschauung war, ich darf zitieren, "In meinen Club kommen keine Türken. Solange ich hier bin erschiesse ich jeden Türken der hier rein will." Solche und ähnliche Worte sprach er mehrere Minuten lang. Alle restlichen noch anwesenden Gäste samt Personal schämten sich nur noch. ... vielleicht doch kein Zufall..

So wie es sich hier darstellt, stimmen das Verhalten der Gäste anscheinend mit der Gesinnung des Betreibers überein. Dies erklärt dann auch, warum dieses Verhalten nicht sofort abgestellt wurde. Da wird keinem der anwesenden Gäste nachträglich ein Hausverbot ausgesprochen. Die haben dieses Verhalten bewusst an den Tag gelegt, weil sie unter ihresgleichen waren (quasi geschlossene Gesellschaft, irgendwo anders habe ich gelesen, dass ein Eintritt von 150 € gezahlt werden musste) - selbst das veröffentlichte Video wird wahrscheinlich keinerlei Konsequenzen nach sich ziehen.

Bei dem Lokal handelt es sich um den Pony Club in Kampen auf Sylt.

[-] nicerdicer2@sh.itjust.works 30 points 4 months ago

As it has been pointed out by others, research data shows that plastic bottle caps are a significant part of trash that is washed onto beaches. In order to prevent that bottles now come with tethered caps. From this point of view this measurement might be understandable. But does one really lose the caps of these bottles that often? Is this really the problem?

Where I live these kind of bottles are part of a deposit system. When you return them at a supermarket you get your deposit (25 Cent) back. This alone ensures that these bottles barely end up anywhere in the enviroment in the first place. When these bottles are returned at the supermarket, all of the bottles do have their respective caps screwed on. This method is practical, as you can collect these bottles wtihout having to deal with leakages of excess liquids.

I never had any issues regarding that the cap is still attached to the bottle, which could be an issue when it comes to recycling these bottles. One major problem when it comes to recycling of plastics is that it is crucial that these plastics are separated by the material they are made of. That is why it is impossible to recycle compound materials, as they can't be separated from each other (i.e. tetra pak, tetra bric). The most common way of getting rid of these kind of packings is to burn them and use their heat for generating electricity.

These plastic bottles on the other hand can be recycled easily, as they consist of only one material (PET) - given, that the label is made of the same kind of plastic like the bottle itself.

I don't know if the bottle cap is made of the same material (PET) or if this is another kind of plastic (ABS, PS, ...). Making these bottle caps from the same material as the bottle itself would impose a greater impact than tethering them onto the bottle.

At first glance this measurement sounds like a low-hanging-fruit-greenwashing-attempt that hurts nobody. Very similar to the ban of disposable plastic cutlery or the ban of plastic straws. Don't get me wrong - I think that these things are an important step towards reducing pollution and garbage overall, but did you ever ask yourself: "How does the garbage get into the ocean in the first place?"

[-] nicerdicer2@sh.itjust.works 19 points 4 months ago

There is an eerie resemblence between the smallest neuron and the largest structure in the universe - Galaxy Filament

44
Hotwheels (sh.itjust.works)

cross-posted from: https://sh.itjust.works/post/18900173

In addition to my last post I want to share another work with you all. I created a toy car from my exsisting model and I also made a packing for it in the style of a Hotwheels toy car packing as if they would have made it.

For the general shape of the cardboard I found a template on the internet. Apparently I wasn’t the first one that came up with the Idea of creating a toy car version of a casual vehicle. This template saved a lot of time in guessing the correct measurements and proportions.

The rendering of the car on the packing was rendered with EVEE since it must not be too realistic. The cars depicted on these real packings are detailed, but look more like a colored illustration, also there are no enviromental reflections. The glass (windshield) is opaque. I added the „Space Star“ writing to the number plate, which usually would be on the trunk door. Without the number plate the picture of the car would be somewhat empy, although the depictions of cars from genuine Hotwheels packings don’t show number plates since these are mostly racing cars - or at least not boring everyday cars.

With EVEE I was able to render the scene without any background because the rendering was put onto the cardboard design which I created in Affinity Designer entirely.

For the bilster packing I used the subdivison surface modifier for smoothness and the solidify modifier to add a little bit of thickness.

To make my car model appear like a toy car I had to apply some changes to it. The most noticeable one is the tires. I found out that toy cars only have a few basic tire designs which are shared between all kinds of cras. I made another set of tires with the help of the array modifier. Additionally to that I made the tires way wider than they would be in real life. The original car model has raher thin tires.

Another thing I did was to remove all additional things like the decals, the windshield wipers the number plates and the antenna. Also I changed the material of many plastic parts (e.g. the mirrors) to the color of the paint. Usually the scale of these toy cars is 1:64. That means the length of the car is about 6 cm or 2.36 Inches. There are not many details visible.

I changed the material properties as well. The head and taillights of reals toy models seem to be painted on, so I scaled down the transmission value and scaled up the roughness value for these materials.I changed the chrome material to a less reflective one as well.

For the composition of the packing and the unpacked toy cars I choosed a road area rug. I guess many of you had one of these - at least I had one. For the fluffiness effect I used hair particles. Since it was not possible to find a good picture on the internet I was forced to re-draw the carpet using a blurry picture as a template. I did that in Affinity Designer. Then I used that drawing as an image texture. The carpet has 8 million hairs (at 10 million my laptop crashes) and working with that many particles was a pain in the ass. I saw the spinning beach ball a lot. Maybe that is the one of the reasons why desktop computers still have a place.

For all renderings I used Cycles.

I didn’t track time so I don’t know how long all of this took me. What I can say is that the drawing of the carpet took me about 9 hours, and the setup with the hair particles took almost all weekend.

72
Hotwheels (sh.itjust.works)

In addition to my last post I want to share another work with you all. I created a toy car from my exsisting model and I also made a packing for it in the style of a Hotwheels toy car packing as if they would have made it.

For the general shape of the cardboard I found a template on the internet. Apparently I wasn’t the first one that came up with the Idea of creating a toy car version of a casual vehicle. This template saved a lot of time in guessing the correct measurements and proportions.

The rendering of the car on the packing was rendered with EVEE since it must not be too realistic. The cars depicted on these real packings are detailed, but look more like a colored illustration, also there are no enviromental reflections. The glass (windshield) is opaque. I added the „Space Star“ writing to the number plate, which usually would be on the trunk door. Without the number plate the picture of the car would be somewhat empy, although the depictions of cars from genuine Hotwheels packings don’t show number plates since these are mostly racing cars - or at least not boring everyday cars.

With EVEE I was able to render the scene without any background because the rendering was put onto the cardboard design which I created in Affinity Designer entirely.

For the bilster packing I used the subdivison surface modifier for smoothness and the solidify modifier to add a little bit of thickness.

To make my car model appear like a toy car I had to apply some changes to it. The most noticeable one is the tires. I found out that toy cars only have a few basic tire designs which are shared between all kinds of cras. I made another set of tires with the help of the array modifier. Additionally to that I made the tires way wider than they would be in real life. The original car model has raher thin tires.

Another thing I did was to remove all additional things like the decals, the windshield wipers the number plates and the antenna. Also I changed the material of many plastic parts (e.g. the mirrors) to the color of the paint. Usually the scale of these toy cars is 1:64. That means the length of the car is about 6 cm or 2.36 Inches. There are not many details visible.

I changed the material properties as well. The head and taillights of reals toy models seem to be painted on, so I scaled down the transmission value and scaled up the roughness value for these materials.I changed the chrome material to a less reflective one as well.

For the composition of the packing and the unpacked toy cars I choosed a road area rug. I guess many of you had one of these - at least I had one. For the fluffiness effect I used hair particles. Since it was not possible to find a good picture on the internet I was forced to re-draw the carpet using a blurry picture as a template. I did that in Affinity Designer. Then I used that drawing as an image texture. The carpet has 8 million hairs (at 10 million my laptop crashes) and working with that many particles was a pain in the ass. I saw the spinning beach ball a lot. Maybe that is the one of the reasons why desktop computers still have a place.

For all renderings I used Cycles.

I didn’t track time so I don’t know how long all of this took me. What I can say is that the drawing of the carpet took me about 9 hours, and the setup with the hair particles took almost all weekend.

[-] nicerdicer2@sh.itjust.works 76 points 5 months ago

Back in 2565 BC cameras weren't that advanced like they are today. Due to the long exposure time these people had to stand still for several hours in order to avoid too much blurriness of the photo. You can see that the people in the background (middle left in the photo) were moving slightly as the photo is a bit blurrier compared to the foreground.

26
A car [OC] (sh.itjust.works)

cross-posted from: https://sh.itjust.works/post/17781622

This is my latest work - a Mitsubishi Space Star (also marketed as Mitsubishi Mirage) modelled in Version 3.6.9.

It took me approximately 180 hours which spread over the course of 6 weeks (Blender, modelling only) as well as an additional 8 hours for tracing the side, front, back and top view (using Affinity Designer) which I used as reference images to create the general shape.

All details were built with eye measure from photos.

Most of the car is symmetrical, which means that only one half had to be built. I used the mirror modifier for almost everything as well as the subdivision modifier, shrinkwrap modifier (for the decals and the back lights) and array modifier (for the grille and for the heating lines in the back window, also for the wheel caps to an extent).

As mentioned above it took some hours to complete the work. One reason might be that the work process is much slower than anticipated, due to lack of knowing all the tricks and features.

My question to you is: Do you also spend so much time creating your work with Blender?

The result (for the upload I removed the number plates):

88
A car [OC] (sh.itjust.works)
submitted 5 months ago* (last edited 5 months ago) by nicerdicer2@sh.itjust.works to c/blender@lemmy.world

This is my latest work - a Mitsubishi Space Star (also marketed as Mitsubishi Mirage) modelled in Version 3.6.9.

It took me approximately 180 hours which spread over the course of 6 weeks (Blender, modelling only) as well as an additional 8 hours for tracing the side, front, back and top view (using Affinity Designer) which I used as reference images to create the general shape.

All details were built with eye measure from photos.

Most of the car is symmetrical, which means that only one half had to be built. I used the mirror modifier for almost everything as well as the subdivision modifier, shrinkwrap modifier (for the decals and the back lights) and array modifier (for the grille and for the heating lines in the back window, also for the wheel caps to an extent).

As mentioned above it took some hours to complete the work. One reason might be that the work process is much slower than anticipated, due to lack of knowing all the tricks and features.

My question to you is: Do you also spend so much time creating your work with Blender?

The result (for the upload I removed the number plates):

3
"Draw for me a ...." (sh.itjust.works)

.

33

A well done interpretation of Queen - We Will Rock You performed in the style of AC/DC

[-] nicerdicer2@sh.itjust.works 85 points 7 months ago

The worst part of all is that no one would think of the fact that a vending machine is performing facial recognition techniques, because in general it is assumed that a vending machine is a mechanical device, as it has been in the past. There is not any user benefit in that.

I researched the manufacuter and in their brochure (see page 6) of a similar vending machine it is revealed what data can be processed:

Among the worst data sets are:

  • product demographics
  • measuring of foot traffic
  • gender/ age/ etc.

Bonus: on page 7 of the product brochure they introduce an app which allows the customer to make purchases directly from their smatphone, with features like

  • consumer engagement through gamification, interactive marketing, gifting, scratch-and-win receipts, product sampling and cross selling

"What do customers get?"

  • a fun and engaging payment process

Finally! I always thought that payment is not fun enough. What a time to be alive.

22

An impressive performance!

[-] nicerdicer2@sh.itjust.works 42 points 8 months ago

This is a good example for bad design. Apart from the odd shape (this is debateable - perhaps some people like the design) the choice of the exterior material is not to be considered a good one, concidering the vehicle's exposure to the elements (dead bugs, tree sap, salt, dust, dirt, etc.) is nothing out of the ordinary. These are normal things an ordinary vehicle is exposed to.

Maybe Tesla could sell accessories like some kind of panel covers to protect the body of the car, in a similar way phone covers are being sold to protect phones. Which in itself is also the result of bad design: not only a phone cover hides the original design of the phone, the necessity to use a cover on a phone shows that the phone probalby is not built strong enough to withstand daily usage, like falling on the ground or being carried in a pocket.

13

This is what dominates the news in Germany right now. The right wing party AfD (Alternative für Deutschland - "Alternative for Germany") is showing their fascist intentions. There are eerie similarities to the Third Reich.

[-] nicerdicer2@sh.itjust.works 22 points 8 months ago

BrandenburgsCDU-Chef Jan Redmann hat sich offen gezeigt, der AfD einen Vizeposten im Präsidium des Parlaments zuzugestehen. "Es nützt der AfD, dass deren Kandidaten regelmäßig bei der Wahl im Bundestag durchfallen", sagte der CDU-Politiker dem RedaktionsNetzwerk Deutschland (RND). "Denn das stützt ihren eigenen Opfermythos, in dem die Partei sich so lustvoll badet. Sie versucht damit, die anderen als schlechte Demokraten zu stigmatisieren."

Da hat wohl jemand noch Restbestände der guten alten Bleifarbe von der IG Farben aufgetan. Vielleicht sollte sich der Herr Redmann einmal die Correctiv!- Recherche durchlesen. Gerade in der CDU und auch in der Werteunion scheinen viele Kandidaten zu sitzen, die sicherlich kein Problem damit haben, mit der AfD zu koalieren, sollte diese an die Macht kommen. Vermutlich gibt es sogar starke Überschneidungen in der Gesinnung.

[-] nicerdicer2@sh.itjust.works 24 points 8 months ago

You will not be able to connect it directly to a computer. In marketing, this will be to meet rigorous water safety standards.

Making devices water-proof is also a marketing scheme to avoid replaceable batteries :

Some manufacturers are already eyeing an exemption for batteries used in "wet conditions" to opt out electric toothbrushes and possibly wearables like earbuds and smartwatches. The exemption is "based on unfounded safety claims," states Thomas Opsomer, policy engineer for iFixit, in Repair.EU's post.

Despite the coming up regulation on batteries and waste batteries by the EU Council batteries in water-proof devices will probably be exempt from being replceable, because the water proof feature of the device cannot be guaranteed. This undermines the right to repair and manufacturers can hope that customers replace their entire devices soon. Making phones water-proof is a loophole to seal off the device so that it is not to be repaired, at least without keeping the water-proof features after repairing.

[-] nicerdicer2@sh.itjust.works 21 points 8 months ago

It only would be a big problem if household devices like washing machines are built in a way that makes a connection to the internet mandatory in order to function properly. Imagine you can't do your laundry because of an internet outage.

Name any household device (washing machine, dishwasher, dryer, toaster, water kettle, iron, coffee maker, (microwave) oven, ...) that has been improved in functionality by connecting it to the internet, making it a internet-of-things-device. I can't think of any.

We have a washing machine that cannot be connected to the internet. After starting the program, we set up a timer on our smartphone, 15 minutes longer than the time the washing machine display is predicting. Works like a charm.

view more: next ›

nicerdicer2

joined 8 months ago