My Linux Mint Cinnamon won't boot up. It's getting stuck on this screen and I don't know what to do to proceed. Before this screen appears it shows the LM logo for a moment.

I'm a total noob and just been using this for a month or two. Did not make any recent changes that I can recall.

It peaked at 4.05% in March. The last 2 months it went just below 4% as the Unknown category increased. For June the reverse happened, so 4.04% seems to be the real current share of Linux on Desktop as desktop clients were read properly/werent spoofed.

I need a few of these for rpi's around the farm. Tired of dealing with LoRa.

I'm running a few Debian stable systems that are up to date on patches.

But I just ran ssh -V and the OpenSSH version listed is "OpenSSH_9.2p1 Debian-2+deb12u3" which as I understand is still vulnerable.

Am I missing something or am I good?

Hello. I recently created a notification daemon which uses eww widgets for its front-end display. So if you are already using eww, give it a go.

I know this is a very niche use case, but if a single person finds it useful, I will be glad.

end-rs

Hello everyone,

I'm looking to increase the security of my computers a bit through firewalld (with the KDE settings). I have a desktop and a laptop, both running Fedora 40 with KDE plasma. I don't have access to the router's firewalls etc etc this is only for my machines.

The issue is I'm having a hard time navigating the zones and setting rules the way I want. I don't wanna deal with switching to UFW and while I generally like CLI stuff I'd prefer to generally stick with the GUI here even though I find it a bit confusing (I will use CLI if necessary tho).

Anyways, let's get to the point. Firstly the only difference between the laptop and desktop, in terms of use-case, is that on my desktop I'm always connected to my home's subnet via LAN while on my laptop I often connect to public wifis, so naturally the laptop is a little less secure.

For my use-case I care about 3 network interfaces:

• tailscale: this is the one I use to ssh into my machines and stuff and I want this to be the only interface which allows me to ssh. This is because not only it allows me to ssh remotely but also I figure is also the most secure way to use ssh as the tailscales team is probably better at security than I am.
• Proton VPN's: this I use for gaming, web browsing and seeding Linux ISOs so I'd like settings that block everything without affecting these usecases.
• normal internet: I almost always have my VPN on but occasionally I don't for one reason or another and I only use this for web browsing and gaming via steam. Settings I'd like here are essentially the same as ProtonVPN's but stricter if it makes sense to be stricter, especially on the laptop where it's likely a public wifi I'm conencting to when I'm not home. If it's possible I'd also like this interface to be hidden from nmap scans.

I do some light pentesting to learn so there's also that.

I currently have every relevant connection set to FedoraWorkstation zone by default except I manually tell the laptop to switch to public zone for public wifis (I'd change the default to be public and specify other zones for non-public connections but rn I'm in a period of time when I'm only connecting it to my home network so I wanna figure out this out first).

My question is, which zones should I use and what rules should I implement to make this more secure?

Thanks in advance

I have a UVC capture card that I use to play my Switch. Currently, I utilize it via the full screen projector feature of OBS, but the Switch is 1080p while my monitor is 4k and the upscaling that OBS uses causes some noticeable artifacts.

I’m wondering if there’s an application with some configurable upscaling options that would make this experience better. I don’t need anything crazy that would cause noticeable input lag, but anything even slightly better than OBS would be welcome

cross-posted from: https://lemmy.pt/post/5733711

A severe vulnerability in OpenSSH, dubbed "regreSSHion" (CVE-2024-6387), has been discovered by the Qualys Threat Research Unit, potentially exposing

So which one is actually official one? I can't describe what "official" mean here, maybe the one that actually came from reddit or the one with more subsscribers or one with more activity ?

Also Why there are multiple copies of same community in different instances? Isn't the whole point of lemmy is that it is federated?

For example, there is Material Notes which has a editor toolbar with bold, indented, ~~stroke~~, etc. But this is rendered, exported to json or syntax like Markdown. This app too, in which i write this on lemmy, does the same. We have ☐, ☒, •, ‣ in Unicode, 𝗕𝗼𝗹𝗱, 𝑖𝑛𝑑𝑒𝑛𝑡, s̵t̵r̵o̵k̵e̵, so why not use this?

Basically, what i'm looking for is a text editor with toolbar/keystrokes for Android or Linux, which adds unicode symbols for rich text. It would make reading plain text notes/todo lists cross-device simpler. Yes, there's UnicodePad and Charmap but that's not the same.

edit: something where you mark a word, tap the B in the toolbar or press ctrl+b and it replaces the characters with uc bold characters, no? Tap the list button and it adds uc bullet points, etc...

Exiting news for the lady bird browser. https://ladybird.org/

Hi ! I'm a little confuse between all immutable versions based on fedora. Is this correct : universal blue = tool to create image, based on fedora atomic desktop ?

With universal blue, they created :

• Bluefin = gnome
• Bluefin-DX = gnome + developper tools
• Aurora = kde
• Aurora-DX = kde + developper tools
• Bazzite = games

What the difference between silverble and bluefin for example, and which are you using ?

Can I delete previous backups, without affecting following backups, Since TimeShift (RSync) make increamental backups.

i'm picasso.

I have been using a company computer running Ubuntu 22.04. There are frequent and unexplained problems, like segmentation faults, stack errors, files disappearing, computer freezing or not booting, or turning off immediately after I turn it on. I don't know what to do. The IT staff came to my office to check the computer and said "it was all good." I am not allowed to boot from a USB stick or enter BIOS or open the case. I ran a command line memory check several times with no errors. There is an NVIDIA card, but it's running X.org and usually headless. I mostly set up tasks via SSH.

What would you do?

I'm working on my transition plan away from Windows and testing out various things in VMs as I do so, and one big hurdle is making sure the VPN client my work requires can connect. Bazzite is my target distro (primarily gaming, work less frequently), though other more traditionally structured ones like Pop!_OS and Garuda are possibilities.

I'm currently trying and failing to get the VPN client working in a distrobox (throws an error during connection saying PPP isn't installed or supported by the kernel). However, I can successfully get the VPN connected if I overlay the client and its dependencies via rpm-ostree install, but I read somewhere that Bazzite's philosophy is to use rpm-ostree as sparingly as possible for installing software to preserve as much containerization as possible.

Since I can get it working outside of a container, am I overthinking it? Should I just accept that this might be one of the "sparing" cases? Is Bazzite perhaps a poor fit for my use case? I've been trying to make sense of this guide, but I'm having trouble understanding how to apply it to my situation, since I'm not that familiar with Docker or Podman.

Are we Wayland yet? Are we JPEGXL yet? Are we Rust yet?

I’ve gathered a meta-tracker for the adoption state of futuristic technologies.

According to this issue, it looks like there are no plans, understandably, for making a version/fork of nsxiv but with native Wayland support.

Any recommendations for a simple image viewer in Hyprland?

I currently have an AMD video card (6700 XT) and Wayland support is excellent. Also, multi-monitor support in Wayland works perfectly.

So what's your experience with Nvidia's 555 driver in Wayland? Those using it in conjunction with KDE 6.1, what's your experience with multi-monitor VRR? I ask about VRR because I heard that multi-monitor VRR in Wayland is still problematic.

This is for my own curiosity if an Nvidia video card could be considered as an upgrade option.

Hello! My disk space was out of space left, so I decided to remove some snapper snapshot. snapper list listed over 360 snapshots. I removed them, and freed 50Gb of space. One of these hasn't been deleted successfully:

Cannot delete snapshot 166 since it is the next to be mounted snapshot.

it's description is writable copy of #156. How can I remove it? should I do it using btrfs subvolume delete?

here's the output of sudo btrfs subvolume list -t /:

ID      gen     top level       path
--     
***
    ---------       ----
256     178487  5               timeshift-btrfs/snapshots/2023-09-18_18-25-33/@
257     341688  5               @home
258     341680  5               @cache
259     341688  5               @log
260     26      256             timeshift-btrfs/snapshots/2023-09-18_18-25-33/@/var/lib/portables
261     27      256             timeshift-btrfs/snapshots/2023-09-18_18-25-33/@/var/lib/machines
708     341688  5               @
710     341680  708             .snapshots
2781    178991  5               timeshift-btrfs/snapshots/2024-05-07_12-20-43/@
2968    326034  710             .snapshots/166/snapshot
2969    341679  710             .snapshots/167/snapshot

all those timeshift subvolumes are there because before snapper, I used to use timeshift. I tried to remove them:

sudo btrfs subvolume delete timeshift-btrfs/snapshots/2023-09-18_18-25-33/@/var/lib/machines    
ERROR: Could not statfs: No such file or directory

If I understand correctly, it means that I should give an actual "system" path instead of the path in the table, but I don't understand which path

thanks in advance to everyone!

i recently switched to connman and i need a tui. so i searched for some and got:

• connman-ncurses
• cmtui

but i believe both are orphaned. so it there any tui for connman out there?

I have a desktop and a steam deck. I would like to setup some old games I have on disc on the desktop. Then compress them and decompress on my Steam Deck without doing the full install again. I understand that with wine/proton prefixes they should be installed to a "fake c:/ windows hierarchy" can I just compress that and copy to a different Linux machine? Does it save which proton version was used? If I use something like Lutris or bottles can I import into them?