homeassistant

14912 readers

219 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago

MODERATORS

GreatAlbatross@feddit.uk

greatalbatross@lemmy.world

What device can rotate a knob and works with HA? (feddit.it)

submitted 9 months ago by Moonrise2473@feddit.it to c/homeassistant@lemmy.world

39 comments fedilink hide all child comments

I was accidentally locked out of home again, and I had to call a professional to open the lock.

But if someone was home, they could have just turned the knob of the door from inside. There's a device that can do that? It needs to do 3 full turns and it requires a bit of force to do that (armored door with iron bars that slide in every direction, so it has a big inertia to start)

I saw a ready solution on a store, the iseo x1r, but that costs 1000 euro + another 200 for the gateway (not mandatory but otherwise it uses proprietary Bluetooth protocol and so it can't talk with HA

you are viewing a single comment's thread
view the rest of the comments

[–] credo@lemmy.world 4 points 9 months ago

Yes, but now you’re weakening two aspects of the security, not just one. And for the digital solution you would also need to (break into the network + break into HA) -or- (break zigbee/zwave/thread) + be physically present to take advantage. I would argue this is generally more secure than a mass-produced lock with unknown vulnerabilities that’s easily recognizable from outside.