Sysadmin

8608 readers

148 users here now

A community dedicated to the profession of IT Systems Administration

No generic Lemmy issue posts please! Posts about Lemmy belong in one of these communities:
!lemmy@lemmy.ml
!lemmyworld@lemmy.world
!lemmy_support@lemmy.ml
!support@lemmy.world

founded 2 years ago

MODERATORS

DarraignTheSane@lemmy.world

00Lemming@lemmy.world

L3s@lemmy.world

What motherboard should I use for a DIY NAS? (lemmy.zip)

submitted 3 days ago by stoy@lemmy.zip to c/sysadmin@lemmy.world

30 comments fedilink hide all child comments

I posted last week about building a NAS, and on friday I saw that the Jonsbo N4 case I had been eyeing for a while was in stock at a good price.

So now I am looking for a motherboard to base my system on, which seems to be a bit difficult.

I need an mATX or ITX board that can handle six SATA drives and also have an NVME slot for a boot drive.

Performance, I value power efficiency more than super high performance, and am on the fence between Open Media Vault or TrueNAS, I like the familiarity of Linux, but I do value the features of ZFS.

If I end up on TrueNAS I may run a VM in the hypervisor from time to time, mostly just for testing.

The NAS will not be an HTPC, but will serve media through SMB and possibly NFS later.

Cooling could be a bit of an issue as the case does not have a lot of space for a cooler

you are viewing a single comment's thread
view the rest of the comments

[–] thisbenzingring 1 points 21 hours ago (1 children)

what? are you kidding or just being dumb? you can restore a raid on different hardware with the hardware configuration tools

as long as the drives and the raid are fine, it will rebuild

[–] hperrin@lemmy.ca 1 points 17 hours ago* (last edited 14 hours ago)

Yes, you have to put in different hardware. (Almost definitely the same brand, maybe even same model.) It’s inaccessible until you get that hardware and replace it. I didn’t mean permanently. A software RAID will work in any system.