homeassistant

14990 readers

1 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago

MODERATORS

GreatAlbatross@feddit.uk

greatalbatross@lemmy.world

my very first automation (lemmy.zip)

submitted 2 months ago* (last edited 2 months ago) by shortwavesurfer@lemmy.zip to c/homeassistant@lemmy.world

19 comments fedilink hide all child comments

I used Home Assistant to create my very first automation today. It's really stupid simple, but I feel as though things will only get crazier from here.

Context: i have an old dumb window AC that has 2 physical dials. One turns fan- low, fan-high, cool-low, and cool- high while the other is labeled from 1 to 8 with 1 being warm and 8 being coldest. This AC is either on or its not. Even if the compressor is not running the fan runs 24/7 until it is physically switched off.

My current automation checks once per hour, and if the temperature is above 80 degrees, it will notify me to turn on the air conditioner.

I intend to buy one of the third reality smart plugs soon and switch the action from notify to "turn on the third reality plug for 10 minutes". Then I will just leave the unit itself on Cool High and let the plug manage the power.

Eventually, I think I will also buy a third-reality temperature sensor and set the trigger to if the temperature sensor says that the room itself is above 80 degrees instead of using the forecast.

you are viewing a single comment's thread
view the rest of the comments

[–] djmikeale@lemm.ee 3 points 2 months ago (1 children)

You could perhaps just flash the lights, or if they're dimmable, turn them a lot down over eg a duration of 20 seconds

[–] AA5B@lemmy.world 1 points 2 months ago (1 children)

Not dimmable unfortunately, and changing that would be far more complicated and expensive than you’d believe

I actually do the slow dim in a different room- that’s an automation I’m more proud of, although most of the credit goes to Inovelli! I have the dimming rates set differently for manual dimming, automated dimming, and good night dimming

[–] djmikeale@lemm.ee 1 points 2 months ago

Nice, sounds very cool!