homeassistant

19746 readers

28 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 3 years ago

MODERATORS

GreatAlbatross@feddit.uk

greatalbatross@lemmy.world

HAOS 18.0 update released (github.com)

submitted 2 days ago by zackhow@programming.dev to c/homeassistant@lemmy.world

19 comments fedilink hide all child comments

There are some notes specific to rpi installs, so give it a read if you run HAOS on that platform.

Raspberry Pi 5 users need a bootloader from at least 2025-02-12, otherwise the display output may freeze early during the boot. Update the bootloader before installing this update, using one of the following methods:

Run rpi-eeprom-update -a while connected directly to the device (using a display and keyboard), prior to installing the OS update.
Use Raspberry Pi Imager with a spare SD card to flash a bootloader update image to it.
Alternatively, if you have an SSH terminal app installed, you can run ha os boards raspberrypi firmware update over SSH right after updating the OS.

you are viewing a single comment's thread
view the rest of the comments

[–] Scheisser@sh.itjust.works 3 points 1 day ago (1 children)

It will boot, the display will be frozen until you run the update.

[–] limelight79@lemmy.world 1 points 5 hours ago

I did the update and ran the recommended command. Seems to be working. I don't have a monitor and keyboard hooked up to know if it's really working.