this post was submitted on 15 Feb 2026
11 points (92.3% liked)

homeassistant

18474 readers
213 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago
MODERATORS
GreatAlbatross@feddit.uk
greatalbatross@lemmy.world
11
HA compatible Z-wave controller? (sopuli.xyz)
submitted 5 days ago by IsoKiero@sopuli.xyz to c/homeassistant@lemmy.world
14 comments fedilink hide all child comments
 

Hello all,

I've been fighting with razberry7 pro on top of rpi4B and it just doesn't work reliably (if at all). I've dug around the internet, tried different software on it, verified that firmware is up to date and so on and even fed my logs to LLMs in hopes they could spot something. Currently my z-wave devices are practically useless (gladly I got devices with physical controls too) and based on discussions around I'm not alone.

So, I think it's time for me to just get something better. Ideal device would be wired over ethernet and have z-wave and zigbee hubs and possibly POE, but I haven't found any which would also be fully supported by HA.

ZWA-2 should be pretty solid choise, but I'm running HAOS in a virtual machine on my proxmox host and I'd really like to have an option to migrate VM to different hardware as needed but that would require also physically moving the USB plug from one host to another.

What are your experiences, what I should get? I'm in EU, so frequencies need to match, but otherwise I'm pretty open for suggestions and having a rock solid z-wave network is a top priority. If it means using ZWA-2 or some other USB gadget I can work with it, but, again, ideally I'd like to have something wired to the network. Wifi is of course an option, but good old ethernet would be preferred.

you are viewing a single comment's thread
view the rest of the comments
[–] IsoKiero@sopuli.xyz 2 points 5 days ago

There is, but as with all hardware, it's one thing to have something supported and another thing if it actually works in real life scenario. My current razberry7 is on supported devices list but constant jamming of the controller says that even if it's technically supported it doesn't really work in practise.