48
What about a bolt that passes through the door and can be secured and released on both sides eg
Might take some fiddling to get the bolt back… hmmm
I like this idea and it could work well. I was considering a latch system but the issue is it would need to go at the top of the door and would be problematic on the outside with the stairs and there can be leverage at the bottom popping the door out of the tracks
Change the stairs. If you can’t stand in front of the door the entryway is poorly designed.
This actually might be the quickest solution even if he opens the door he won’t be able to go through. I’ll look into see if there’s any gates that would work! Thank you!
load more comments
(1 replies)
Not being able to exit your home in an emergency without a key is a serious safety problem. In most places it is not permitted.
International Residential Code R311.4.4 “All egress doors shall be readily openable from the side from which egress is to be made without the use of a key or special knowledge or effort”. Most local codes are derived from this.
Yes this is why I need it to be accessible on both sides of the door. 1 for emergency access and 2 so I and my partner can unlock it coming home from work if the other is sleeping edit added missing word
I guess I didn’t understand what you were describing. When we moved in to our house, the previous owners had a deadbolt that locked with a key on the inside instead of a thumb turn, and it was the only way to lock the door. This is a pretty bad idea since it creates a potential situation where you’re stuck inside your house, or have to find another exit. In some emergencies, seconds count. Even if you know how to open the door, you might have someone over who doesn’t, which is why fire codes are the way they are. Someone unfamiliar with the setup, panicking, in the dark, in a room full of smoke, needs to be able to escape without solving a puzzle.
Because I already had experience with having to replace that lock with an appropriate one for an exit door, I jumped straight to the assumption that when you said “lock on both sides”, you were talking about a key, and not just a childproof latch of some kind. I have the privilege of not living with anyone who is a flight risk, so it’s easy for me to just dismiss it as unsafe. I looked at some of the solutions out there and they seem to be designed to stop toddlers with no dexterity, not an autistic person determined to turn all the things. Sorry if my answer was unhelpful; people are injured or killed every day because they created a situation they didn’t realize was hazardous until it was too late. My intention was only to prevent the downsides of locking the door this way from being overlooked.
To be completely honest my only solution might be to rip out the door and put in a regular door so normal child locks will work. With home and safety checks we will be subjected to, having the door requiring a key on both sides won’t work and will be flagged as a danger. Thank you for your response all input has been extremely helpful including your insight
We use a keyed backdoor to prevent visiting children from accessing the pool.
load more comments
(12 replies)
I could use more information.
Is the door keyed? Key hole on outside and a lever on the inside?
Yes the current lock is a simple toggle that grabs an edge of the door on the inside. There is a keyhole on the outside which pushes the lever up unlatching the clasp from the edge of the door edited spelling errors
Can you put a baby gate between the stationary pane and the frame?
Also, consider crossposting to !dadsplain@lemmy.ca. Not sure if you are a dad, but they're not too picky. !homeimprovement@lemmy.world and !diy@lemmy.ml are good choices, too.
I’ll look at cross posting thanks for the advice!
Sorry if this is an obvious question but since it's the main entrance, you already have a key, right? You already have the means to lock and unlock this door in a childproof way from both sides. Usually childproof locks are for pantry doors and such.
How come you need an extra layer of locking for the main door?
The current lock is a simple toggle. My autistic child loves to play with switches/nobs/wheels ect so he will be able to easily open the lock and pull open the door. There is nothing I can find to stop him from access to the toggle without blocking access from unlocking from the other side of the door
load more comments
(6 replies)
Some kind of a magnet pin situation? Like the child cabinet locks that use a magnet. From one side your can just move the lock. From the other side your can use a magnet to move the lock.
That might be an interesting approach if I can figure out how to get a pin through like a deadbolt and disengage with a magnet on a stick. Thanks for the different idea!
You can get a lockset with a numerical keypad on both the inside and outside hardware. i.e. no inside knob on the lock for little fingers to let themselves out. It might technically be a fire hazard, though, unless you have an alternate means of quick escape. Keep a safety glass breaker tool by the door but up high or something.
Most keypad sets use a deadbolt system, because it’s a sliding door a deadbolt won’t work because it slides open. I have seen other locks that use clasps but none of them have keypads on both sides of the door.
edit: Last night when i looked on Amazon, it appeared that there were several for a sliding patio door. There are thin ones for sure, you could ask in the questions if they will work for mortise locks. I know you dont specifically need the solution to be "smart home" capable but maybe one of these solutions would align with your needs.
Perfect thanks I’ll look into it!
Just thinking outside the box here, what about an alarm or chime instead of a lock?
You can’t make it impossible for a child to open. But you can make sure that if they do open it, you’ll know.
This is an option however Ill be moving beside a river and my child is autistic so a lock would be best if I can figure out a way to do it
I grew up autistic and fascinated with water. My mom handled that by taking me swimming all the time. We were at pools, rivers, lakes, water parks all the time and I absolutely loved it.
The world is full of water hazards, and the best safety plan is to master them.
My little guy is more interested in how things move and what they do when used. Like flicking light switches turning knobs, pressing buttons ect and seeing what happens when they are engaged/disengaged. Our worry is that he’ll open the door to explore to find more things to try and get lost or wander towards the river in search of more switches or nobs to turn
load more comments
(1 replies)
Probably not what you want to hear, but when I was growing up my dad used a few tubes of silicone to seal up some of the windows and sliding door at my house. When we got older he just took a utility knife and cut it off
The issue here is that we use the door as our main entrance so sealing it like this won’t help
Put the lock high up?
If I’m able to build a landing/porch on the outside this is the easiest solution. But at the moment my stairs make it 1.5 feet lower than the inside floor which means it’ll to high on the outside but to low on the inside.
Ah. Sorry I missed that.
Remote control then. Getting into the house requires push of a button or typing in code. Getting out can be done with manual turn of deadbolt because inside you’re high enough to reach:
- fire failsafe because you’ve got mechanical control when trying to exit even if electricity’s out
- harder to copy your key because it’ll be a key fob or something
- if you do lose a key you can simply de-authorize it instead of having to change locks
- probably cost you a few hundred to a thousand for the hardware and install labor. Just my guesses at price haven’t looked into it
How about a traditional deadbolt at the top or bottom?
Deadbolt at the top can cause the door to shift out of its tracks when pulled on and if it’s at the bottom it’s easily accessible to tiny hands playing with it. If I place it more in the top centre it’ll be Duffy to reach with a key unless it’s electronic.. and that comes with many other issues
I've only ever seen deadbolts on swinging doors but this has gotta be a thing for sliding doors also
Just rotate 90°. I don't know the easiest way to drill through it, but a decent handyman could probably do it.
What does the lock look like? Does unlocking on one side mean the lock portion on the other side moves too?
If it's like the sliding doors I know with the flat lock, you could use something like this and keep it flat to lock.
The current lock just latches onto a small metal bar… if someone pulled hard enough it would just bend open.
view more: next ›
this post was submitted on 01 Sep 2023
48 points (90.0% liked)
Asklemmy
43027 readers
1387 users here now
A loosely moderated place to ask open-ended questions
If your post meets the following criteria, it's welcome here!
- Open-ended question
- Not offensive: at this point, we do not have the bandwidth to moderate overtly political discussions. Assume best intent and be excellent to each other.
- Not regarding using or support for Lemmy: context, see the list of support communities and tools for finding communities below
- Not ad nauseam inducing: please make sure it is a question that would be new to most members
- An actual topic of discussion
Looking for support?
Looking for a community?
- Lemmyverse: community search
- sub.rehab: maps old subreddits to fediverse options, marks official as such
- !lemmy411@lemmy.ca: a community for finding communities
~Icon~ ~by~ ~@Double_A@discuss.tchncs.de~
founded 5 years ago
MODERATORS