187
submitted 7 months ago* (last edited 7 months ago) by Trainguyrom@reddthat.com to c/selfhosted@lemmy.world

I placed a low bid on an auction for 25 Elitedesk 800 G1s on a government auction and unexpectedly won (ultimately paying less than $20 per computer)

In the long run I plan on selling 15 or so of them to friends and family for cheap, and I'll probably have 4 with Proxmox, 3 for a lab cluster and 1 for the always-on home server and keep a few for spares and random desktops around the house where I could use one.

But while I have all 25 of them what crazy clustering software/configurations should I run? Any fun benchmarks I should know about that I could run for the lolz?

Edit to add:

Specs based on the auction listing and looking computer models:

  • 4th gen i5s (probably i5-4560s or similar)
  • 8GB of DDR3 RAM
  • 256GB SSDs
  • Windows 10 Pro (no mention of licenses, so that remains to be seen)
  • Looks like 3 PCIe Slots (2 1x and 2 16x physically, presumably half-height)

Possible projects I plan on doing:

  • Proxmox cluster
  • Baremetal Kubernetes cluster
  • Harvester HCI cluster (which has the benefit of also being a Rancher cluster)
  • Automated Windows Image creation, deployment and testing
  • Pentesting lab
  • Multi-site enterprise network setup and maintenance
  • Linpack benchmark then compare to previous TOP500 lists
you are viewing a single comment's thread
view the rest of the comments
[-] solrize@lemmy.world 26 points 7 months ago

25 machines at say 100W each is about 2.5KW. Can you even power them all at the same time at home without tripping circuit breakers? At your mentioned .12/KWH that is about 30 cents an hour, or over $200 to run them for a month, so that adds up too.

i5-4560S is 4597 passmark which isn't that great. 25 of them is 115k at best, so about like a big Ryzen server that you can rent for the same $200 or so. I can think of various computation projects that could use that, but I don't think I'd bother with a room full of crufty old PC's if I was pursuing something like that.

[-] FryAndBender@lemmy.world 13 points 7 months ago

UK here, we could run that from 1 plug.

[-] Trainguyrom@reddthat.com 9 points 7 months ago

I won't be leaving all of them on for long at all. I've got a few basically unused 15A electrical circuits in the unfinished basement (can see the wires and visually trace the entire runs) I'll probably only run all 25 long enough to run a linpack benchmark and maybe run some kind of AI model on the distributed compute then start getting rid of at least half of them

[-] rsolva@lemmy.world 7 points 7 months ago

I have a couple of these (only the G2 and G3 SFF) and they consume between 6-10w when not under load, and they max out at 35w (or 65w depending on CPU). I run proxmox with 64gb ram and they are surprisingly efficient.

[-] billwashere@lemmy.world 7 points 7 months ago

This is only about 21 amps. Most outlets in a home are 15amps but 20amps isn’t unheard of. From one outlet doubtful but yes one house would provide that much power easily if you split them up to three or 4 rooms on different breakers.

Now it would be fun to watch his electric meter spin like a saw blade … (yes I’m old .. I remember meters that had spinning discs)

[-] Zorg@lemmings.world 4 points 7 months ago

Just two 15A breakers is enough actually. Outlets are supposed to be able to sustain 80% power, so you should be able to pull 1.44kW from a singly puny Nema 5-15.

[-] billwashere@lemmy.world 2 points 7 months ago

Well true but I was assuming the circuits had some things drawing a little power. Flipping on a device and tripping a breaker with 12 machines on it wouldn’t be ideal :)

I have done this before in my upstairs home lab. 3 beefy ESXi machines, some nas storage, and a basic 10gbe switch eats up a lot of a single 15amp circuit. And apparently turning on a TV pushes it over the edge. Luckily the UPS saved my but while a reset the breaker and shut some stuff off.

[-] possiblylinux127@lemmy.zip 6 points 7 months ago

Jack into the local coffee shop

[-] Blackmist@feddit.uk 2 points 7 months ago

That's less than a kettle, in the UK at least.

Of course I wouldn't want to be running that all the time, because electric ain't cheap.

this post was submitted on 21 Apr 2024
187 points (94.3% liked)

Selfhosted

40403 readers
362 users here now

A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don't control.

Rules:

  1. Be civil: we're here to support and learn from one another. Insults won't be tolerated. Flame wars are frowned upon.

  2. No spam posting.

  3. Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it's not obvious why your post topic revolves around selfhosting, please include details to make it clear.

  4. Don't duplicate the full text of your blog or github here. Just post the link for folks to click.

  5. Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).

  6. No trolling.

Resources:

Any issues on the community? Report it using the report flag.

Questions? DM the mods!

founded 2 years ago
MODERATORS