372
Obscure screw added so appliance cannot be disassembled (lemmy.world)
submitted 3 months ago by an_onanist@lemmy.world to c/right2repair@discuss.tchncs.de
158 comments fedilink hide all child comments

Basic blender went bad (motor ran but spindle wasn't rotating). I wanted to disassemble to see if it could be repaired. Three of the four screws were Phillips head. I had to cut the casing open in order to discover why I couldn't unscrew the fourth. It was a slotted spanner.

you are viewing a single comment's thread
view the rest of the comments
[-] EndOfLine@lemm.ee 4 points 3 months ago* (last edited 3 months ago)

Thought they might sell these specialty tools online, but 3 minutes of searching came up with nothing. Might be time to get creative.

Do you have the room to get a Dremel in there the cut it so a regular flathead will work?

If not, maybe try to use needle noise pliers as your screwdriver.

As a last resort, pick up a cheap screwdriver and cut it to make it slotted.

Edit: I love how quickly several people have commented with links to the needed tools. Thanks to all of you!

[-] jws_shadotak@sh.itjust.works 17 points 3 months ago* (last edited 3 months ago)

https://www.ifixit.com/products/mako-driver-kit-64-precision-bits

iFixit sells kits like this that have every screw head imaginable. No need to get creative.

Edit: fixed link

[-] EndOfLine@lemm.ee 8 points 3 months ago* (last edited 3 months ago)

Nice. Thanks for the link.

FYI: There is an "s" missing from the end of that url. https://www.ifixit.com/products/mako-driver-kit-64-precision-bits

[-] jws_shadotak@sh.itjust.works 7 points 3 months ago

FYI: There is an "s" missing from the end of that url. https://www.ifixit.com/products/mako-driver-kit-64-precision-bits

Thanks, fixed

[-] aniki@lemm.ee 1 points 3 months ago

Hows the durability of their stuff? I've been intrigued.

[-] jws_shadotak@sh.itjust.works 4 points 3 months ago

I've had this kit for about two years and it's been excellent. I don't use it for much outside of electronics, which is not very taxing on these tools.

[-] aniki@lemm.ee 2 points 3 months ago

Awesome appreciate the insight! Next time I need something weird I'll grab a kit and chuck the rest of my amalgamation of random one-offs.

[-] twack@lemmy.world 3 points 3 months ago

If you snap one, they will send you a replacement for free. I chipped one of the security torx once, and was surprised at how easy it was to get replaced.

[-] aniki@lemm.ee 2 points 3 months ago

thats whats up!

[-] steal_your_face@lemmy.ml 3 points 3 months ago

I have this kit and I remember seeing a similar head in there. Highly recommend it. I’ve used it a bunch.

[-] kernelle@lemmy.world 2 points 3 months ago

Same, and I bought one over 6 years ago. Would buy again 11/10

[-] GluWu@lemm.ee 1 points 3 months ago* (last edited 3 months ago)

...

[-] KazuyaDarklight@lemmy.world 6 points 3 months ago

Depending on the size, I've absolutely gotten small versions of these bits in IT/Electronics repair kits.

this post was submitted on 15 May 2024
372 points (96.3% liked)

Right to Repair

1409 readers
1 users here now

Whether it be electronics, automobiles or medical equipment, the manufacturers should not be able to horde “oem” parts, render your stuff useless if you repair it with aftermarket parts, or hide schematics of their products.

I Fix It Repair Manifesto

Summary article from I Fix It

Summary video by Marques Brownlee

Great channel covering and advocating right to repair, Lewis Rossman

founded 1 year ago
MODERATORS
Engineer@discuss.tchncs.de