Adjusting SMPS output voltage (discuss.tchncs.de)

submitted 9 months ago by Rolive@discuss.tchncs.de to c/askelectronics@discuss.tchncs.de

11 comments fedilink hide all child comments

Does anyone recognise these power supplies? They're cheap AliExpress led drivers and I want to change its output voltage to around 22V from 12V. I've read that the way to do this is to adjust the REF voltage on the IC that controls it. It's a KA3845 but I don't understand where that reference voltage is regulated. One voltage is feedback from the output where then other should be a reference.

What would be the best way to approach this? I can't find any schematics on these boards unfortunately.

Thanks.

you are viewing a single comment's thread
view the rest of the comments

[-] Rolive@discuss.tchncs.de 2 points 9 months ago

Thanks. I ordered the 24V model in hopes of adjusting it down to 22V. I will use that to keep a 7s Li-Ion battery at a minimum charge level whereas a solar panel array may increase that voltage higher. It looks like the 24V model's capacitors need to be changed as well since they can't handle the Li-Ion batterys' max charge voltage.

this post was submitted on 03 Nov 2023

33 points (100.0% liked)

Ask Electronics

3173 readers

7 users here now

For questions about component-level electronic circuits, tools and equipment.

Rules

1: Be nice.

2: Be on-topic (eg: Electronic, not electrical).

3: No commercial stuff, buying, selling or valuations.

4: Be safe.

founded 1 year ago

MODERATORS

DavideAndrea@discuss.tchncs.de

linker3000@discuss.tchncs.de