889
Trig
(lemmy.world)
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
this post was submitted on 19 Dec 2023
889 points (91.9% liked)
Memes
45129 readers
2291 users here now
Rules:
- Be civil and nice.
- Try not to excessively repost, as a rule of thumb, wait at least 2 months to do it if you have to.
founded 5 years ago
MODERATORS
I use trig every few years when buying a tv. Tv specs always list diagonal but rarely horizontal and vertical which is needed for knowing how a TV will fit in a space.
I'm trying to figure out how you need trig for that. Just the Pythagorean theorem and ratios seem sufficient to me.
Ratios can be used in trig -- if it's 1.5 times as long as it is tall, tan(\theta) = \frac{2}{3}, which then allows you to find the lengths of the other two sides easily so long as you have a calculator.
Right, but why bring theta into it at all? TV screens are as a hypotenuse (a²+b²) with a fixed ratio (a/b=16/9), so you just need to solve for a and b.
You don't have to, but it seems perfectly easy since you don't have to write anything down to solve it. c*sin(arctan(b/a)) gives b, and c*cos(arctan(b/a)) gives a. I'm not disputing that you can do it without, but I don't think it's necessarily any quicker or easier.
If it works it works. I just never would have thought to do it that way.
I am trying to figure out why you'd even need that.
The measurements of the product is usually written in the tech spec.
I mean unless you're able to do it in your head in less than a minute, bringing a tape measure would probably be faster and easier.
Or just check the spec on the box/website.