199
rule (lemmy.blahaj.zone)
you are viewing a single comment's thread
view the rest of the comments
[-] tupewe@lemmy.blahaj.zone 38 points 1 year ago* (last edited 1 year ago)

Wait what even would you use that for??

And at what time of the year do people just suddenly say "huh I wish my cord was gay"??

[-] problembasedperson@lemmy.world 39 points 1 year ago* (last edited 1 year ago)

There's xmas lights you can daisy-chain. People put them the wrong way around and end up with the female connector going to the outlet. Rather than fixing their mistake, they try to have a male-to-male wire made, hence "at this time of the year".

[-] neomis@sh.itjust.works 20 points 1 year ago

Some people have whole house generators for when their power goes out for extended periods of time. The simplest/ bad way to connect the generator to the house is a male to male connector to the breaker box.

[-] Johanno@lemmy.fmhy.ml 6 points 1 year ago

Yes but NO!

If you have a generator you should have several security installions in place and at that point hard wired everything.

You need at least a switch that disconnects the system power and then enables the generator amd vise versa

[-] driving_crooner@lemmy.eco.br 11 points 1 year ago

I have a volt inverter (110 <-> 220) that use that kind of cable. It has two female inputs and this cable, if you want to transform from 110 to 220 you connect the male to the 110 output on the wall to the 110 input in the transformer and then your 220v appliance on the other side. Use everything the other way around to transform 220 to 110.

[-] Nerdfest@kbin.social 10 points 1 year ago

Back-feeding a generator into your house circuits. A very bad idea.

[-] Stez827@sh.itjust.works 2 points 1 year ago

It really isn't if you understand the wiring in your home

[-] Ashen44@lemmy.ca 5 points 1 year ago

Counterpoint: most people do not understand the wiring in their home

[-] Neato@kbin.social 1 points 1 year ago

Wouldn't you connect a generator to your panel so the breaker could engage?

[-] darkdemize@sh.itjust.works 8 points 1 year ago

My guess would be to connect two strands of Christmas lights, since those tend to have a plug on one end and a socket on the other.

this post was submitted on 05 Jul 2023
199 points (100.0% liked)

196

16214 readers
2467 users here now

Be sure to follow the rule before you head out.

Rule: You must post before you leave.

^other^ ^rules^

founded 1 year ago
MODERATORS