388
submitted 1 year ago by graham1@lemmy.world to c/til@lemmy.world

I know it's obvious from the picture, but I never realized DeLoreans were stainless steel, which is very rare for vehicles made in the past half-century. DMC DeLorean Wikipedia here

Other DeLorean oddities:

  • The car did not vary design by year, but rather by production batch, making it hard to identify a DeLorean's year from its design
  • The car was expensive for its time ($25,000-$34,000 in 1982-1984) and sold as a GT style car, despite being relatively slow (0-60 in approx. 8.8-10sec)
  • "A total of four recalls were issued by the factory to correct problems such as a sticking throttle, front-suspension issues and an inertia switch"
  • "The original 80-amp Ducellier alternator supplied with the early-production DeLoreans could not provide enough current to supply the car when all lights and electrical options were on; as a result, the battery would gradually discharge, leaving the driver stranded on the road."
top 43 comments
sorted by: hot top controversial new old
[-] DarkGamer@kbin.social 105 points 1 year ago

The stainless steel made it very heavy, and it was underpowered. That's kind of a joke in Back to the Future, getting to 88MPH is non-trivial.

[-] squiblet@kbin.social 32 points 1 year ago

It sounded like a lot when I was 6. My mom told me 40 mph was really fast.

[-] Mongostein@lemmy.ca 16 points 1 year ago

88 is fast. Faster than any highways in my country. Not that people don’t drive that fast here, but it’s not allowed. finger wag

[-] SeaJ@lemm.ee 13 points 1 year ago

It was faster than all highways in the country at the time. Highways were limited to 55MPH at the time.

[-] squiblet@kbin.social 10 points 1 year ago

88 is pretty fast, but not really time-travel fast. People frequently drive 80-95 on some roads in the US, especially now that speed limits are commonly 65-75 and as high as 85. I also recall when 55 was the standard.

[-] mtcerio@lemmy.world 88 points 1 year ago* (last edited 1 year ago)

Doc says the stainless steel bodywork is the reason he chose that car as time machine, when Marty is surprised to see it.

[-] davidgro@lemmy.world 76 points 1 year ago

"Besides, the stainless steel construction made the flux dispersal...(watch beeps) Look out!"

[-] HubertManne@kbin.social 14 points 1 year ago

In the mad magazine send up he said its because John DeLorean almost did time

[-] ieightpi@lemmy.world 63 points 1 year ago

I don't care if the DeLorean is impractical. I think it's one of the classiest and timeless looking cars out there.

[-] lorez@lemm.ee 16 points 1 year ago

In my mind no car will ever be as cool or gorgeous as Doc's time machine sliding off his smoky truck.

[-] Verdammt@lemmy.world 8 points 1 year ago

I've always wondered, with the gull-wing doors, how did Doc get inside the car while it was inside the truck.

[-] lorez@lemm.ee 3 points 1 year ago

Lol. He invented a teleportation device just for that.

[-] OptimusPhillip@lemmy.world 2 points 1 year ago

Despite appearances, the gull wing doors don't actually require that much horizontal clearance. There are videos online showing you only need a few inches

[-] pizza_rolls@kbin.social 33 points 1 year ago

My boyfriend is obsessed with back to the future and we have seen 4/7 screen used deloreans.

Peterson museum in LA has a restored one on display, they also have a gold delorean and a few of the new concept designs.

We got to see the one in Universal Orlando that was just chilling out in the middle of the sidewalk for a long time, but that one has disappeared since COVID. We didn't even know this was a screen used one, we figured it was a replica cause people were walking up and touching it and stuff. Wild. Probably why it's gone now, too many people fucked with it and it has to be restored. It sat out in the Florida humid ass weather for years though and no rust.

Unfortunately 2 are in Japan in private collections, but I don't think anyone knows who owns them. 2 we saw were in a private collection, but the owners gave us a tour and we even got to sit in one of them (the other is the one they destroyed with the train). And the fiberglass one from 2 was destroyed so we will never see it :(

[-] greendakota99@lemmy.world 2 points 1 year ago

I definitely saw the one at Universal Orlando and am also surprised its a legit version. Also saw some Fast and Furious cars there so they might have been also!

[-] pizza_rolls@kbin.social 2 points 1 year ago* (last edited 1 year ago)

If you saw it before 2020 then yes it was the real one. They replaced it with a replica when they reopened post COVID

Universal actually treats a lot of their props and cars like shit, but I didn't know that when I was visiting lol. They are the ones that destroyed the fiberglass car

[-] ArugulaZ@kbin.social 33 points 1 year ago

Still beats a refrigerator for time travel. (Yeah, that was the original plan for the film. Switching to a futuristic-looking car was definitely the right decision.)

Crappy as this car may be, it's still pretty awesome seeing a DeLorean in a real life situation. I literally saw a DL in a Wal-Mart parking lot three year ago, and geeked the hell out. The owner even had a Back to the Future reference on his license plate!

[-] squiblet@kbin.social 16 points 1 year ago

Encouraging kids to play Back to the Future by getting into a refrigerator could cause some problems. I'll always remember, my brother got a closet door slammed shut on his finger when we were playing Indiana Jones.

[-] magnetosphere@kbin.social 6 points 1 year ago* (last edited 1 year ago)

If you had said a fridge was the original plan for Bill and Ted’s Excellent Adventure, I would have believed that, too.

[-] daninet@lemmy.world 31 points 1 year ago

Not only it is stainless steel but also it was directionally sanded so it has a "brushed" finish. If you have scratched it you had to use a specific grit of sandpaper and directionally "rescratch" it to return the original look.

[-] ElectricTickles 17 points 1 year ago

It was a sexy car though

[-] Hextic@lemmy.world 16 points 1 year ago

By all accounts the DeLorean is a piece of shit. But the design screamed The Eighties. Back when we thought the future was a series of hard edges.

[-] 5redie8@sh.itjust.works 5 points 1 year ago

I still do, man look at that thing

[-] guylacaptivite@sh.itjust.works 14 points 1 year ago

Only the outer body panels were stainless. The functionnal car was basically a lotus chassis and an under powered peugeot engine. Many claims were made when it was announced but the final product was literally just the shell with a different car underneath. And it ended up twice as expensive as what they planned.

[-] teamevil@lemmy.world 1 points 1 year ago

I think it was a Volvo engine

[-] Blamemeta@lemmy.world 9 points 1 year ago

It also used a renault transmission, which could only barely take the power of the stock engine.

[-] SantaClaus@lemm.ee 11 points 1 year ago

I think Alpine is still using that one in F1 today…

[-] SatanicNotMessianic@lemmy.ml 9 points 1 year ago

The DeLorean was also one of the first self-driving cars.

You just pulled onto the road, and it would follow any white lines.

[-] greendakota99@lemmy.world 2 points 1 year ago

Is this a joke/reference I’m not understanding?

[-] MilitantApathist@lemmy.world 8 points 1 year ago

The company's founder was charged with cocaine trafficking but found not guilty due to police entrapment.

Also, it was the '80s and there was a pretty big overlap in the target audiences for the DeLorean and cocaine.

[-] greendakota99@lemmy.world 1 points 1 year ago

Oh, I follow now! Thanks!

[-] Strangle@lemmy.world 7 points 1 year ago

Stainless steel doesn’t rust

[-] anime_ted@lemmy.world 11 points 1 year ago

It doesn’t, but if I recall correctly there were a lot of owners complaining that the brushed finish would discolor if you touched it with your hand. Body oils and salt left finger marks everywhere from people touching the car.

[-] addie@feddit.uk 7 points 1 year ago

It's steel which 'stains less' than plain steel, it most certainly corrodes. Leave it in a salt-water environment, it'll be gone in no time. For most non-culinary applications, either a maraging steel or plain steel with a coat of paint will be a better long-term choice.

[-] evatronic@lemm.ee 8 points 1 year ago

"Stainless" not "Stainnone."

[-] Aux@lemmy.world 4 points 1 year ago

It also made them heavy and slow vehicles.

[-] ampedwolfman@lemmy.world 6 points 1 year ago

For those of you that don't know, the car was manufactured as cheap as possible so the owner could use them to traffic cocaine. The stainless steel was a design choice to make it easier to cut off parts of the car to retrieve the drugs. The Wikipedia states that the first prototypes were carbon fiber but supply chain issues caused the car to be too expensive. They basically made the cheapest thing passable as a drug mule, sold it for some crazy price, and packed drugs into it.

[-] FlyingSquid@lemmy.world 5 points 1 year ago

Put it with the big spoons, not the little spoons.

[-] PThompson509@lemmy.world 3 points 1 year ago
[-] EveningPancakes@lemm.ee 1 points 1 year ago

Wait, is this for real or some sort of crypto scam? When are they slated to release?

[-] HunterBidensLapDog@infosec.pub 3 points 1 year ago

Coke. A lot better of coke..

[-] zerbey@lemmy.world 1 points 1 year ago

As a sports car, it was a piece of crap, my Kia Forte could beat it in a drag race. You can't beat that iconic design, however.

this post was submitted on 22 Jul 2023
388 points (96.4% liked)

Today I Learned

17944 readers
491 users here now

What did you learn today? Share it with us!

We learn something new every day. This is a community dedicated to informing each other and helping to spread knowledge.

The rules for posting and commenting, besides the rules defined here for lemmy.world, are as follows:

Rules (interactive)


Rule 1- All posts must begin with TIL. Linking to a source of info is optional, but highly recommended as it helps to spark discussion.

** Posts must be about an actual fact that you have learned, but it doesn't matter if you learned it today. See Rule 6 for all exceptions.**



Rule 2- Your post subject cannot be illegal or NSFW material.

Your post subject cannot be illegal or NSFW material. You will be warned first, banned second.



Rule 3- Do not seek mental, medical and professional help here.

Do not seek mental, medical and professional help here. Breaking this rule will not get you or your post removed, but it will put you at risk, and possibly in danger.



Rule 4- No self promotion or upvote-farming of any kind.

That's it.



Rule 5- No baiting or sealioning or promoting an agenda.

Posts and comments which, instead of being of an innocuous nature, are specifically intended (based on reports and in the opinion of our crack moderation team) to bait users into ideological wars on charged political topics will be removed and the authors warned - or banned - depending on severity.



Rule 6- Regarding non-TIL posts.

Provided it is about the community itself, you may post non-TIL posts using the [META] tag on your post title.



Rule 7- You can't harass or disturb other members.

If you vocally harass or discriminate against any individual member, you will be removed.

Likewise, if you are a member, sympathiser or a resemblant of a movement that is known to largely hate, mock, discriminate against, and/or want to take lives of a group of people, and you were provably vocal about your hate, then you will be banned on sight.

For further explanation, clarification and feedback about this rule, you may follow this link.



Rule 8- All comments should try to stay relevant to their parent content.



Rule 9- Reposts from other platforms are not allowed.

Let everyone have their own content.



Rule 10- Majority of bots aren't allowed to participate here.

Unless included in our Whitelist for Bots, your bot will not be allowed to participate in this community. To have your bot whitelisted, please contact the moderators for a short review.



Partnered Communities

You can view our partnered communities list by following this link. To partner with our community and be included, you are free to message the moderators or comment on a pinned post.

Community Moderation

For inquiry on becoming a moderator of this community, you may comment on the pinned post of the time, or simply shoot a message to the current moderators.

founded 1 year ago
MODERATORS