[-] AliasAKA@lemmy.world 1 points 1 day ago

I was indeed using hyperbole. Med center also has a lot of ground lines. But the vast majority is unmaintained, extremely aged above ground infrastructure. That might be okay if we didn’t live somewhere that gets hurricanes and other severe events, but we do.

[-] AliasAKA@lemmy.world 8 points 1 day ago

Most pro union pro worker president we’ve had recently — that’s about it. He’s not Bernie but wealthy people really hate us poor working class folks.

[-] AliasAKA@lemmy.world 6 points 1 day ago

As a Texan, the problem is we have 0 below ground lines, we don’t stage workers even when we know storms are coming, we don’t require structures to be built in resilient ways (including solar or wind facilities for new builds) and the end result is that our communities aren’t resilient.

Sure we pay less in taxes (note: if you’re wealthy), but you need a generator and an interlock kit to have the electric uptime other places have. You’re still paying a tax to live here, it’s just not going to the government to give you a nicer community, it’s going to businesses so their execs can get wealthier.

[-] AliasAKA@lemmy.world 35 points 2 months ago* (last edited 2 months ago)

Really feels like Israel is trying to do the old Russian misinformation game even on Lemmy these days to try and suppress blue votes on a single wedge issue because they know it’s the only way to get Trump elected and get more guns and bombs than they’re already getting, and they wouldn’t get pushback at all for Rafah or any warnings of any sort, just a blank check for wanton genocide.

Like I don’t like what’s happening in Palestine, but I don’t want to make it worse by pretending a non vote would somehow help them. Helping them would be ensuring that the party least likely to enable Israel the most is elected. That’s Joe Biden. Some people have ridiculous nicknames for him but my god wait until they make this look like restraint if Trump gets elected. Palestine would cease to exist almost immediately and Israel will de facto annex it, like Russia is trying to do in Ukraine.

So really you can vote to minimize the pain and suffering of Palestinians or you can not vote to minimize the pain and suffering of Palestinians. Personally I’m gonna vote to minimize the pain and suffering of Palestinians, and also support the environment (again not to the degree I desire), and support abortion access, and trans rights, and taxes for the wealthiest Americans, and, the list goes on, but yeah, I’m gonna vote for Joe Biden.

[-] AliasAKA@lemmy.world 74 points 4 months ago* (last edited 4 months ago)

We need to start poisoning this data. I don’t think the solution is to cut the wires, I think it’s to send bogus data. Just make it so that no matter how I drive, the data is always overwritten that I traveled 5 miles at 30mph average with no hard stops and no hard accelerations. I only ever make that trip. Wanna base my insurance off that? Go for it.

Anyways I lack the technical ability to do this, but wonder if some enterprising person could hack the obd to constantly overwrite the data here.

Again I want to poison this data. It should be illegal, but it’s not. Companies will charge me more if I block it. So the solution is data poisoning imo.

Incidentally we need to be poisoning ALL data brokers and collectors for these types of things.

[-] AliasAKA@lemmy.world 47 points 4 months ago* (last edited 4 months ago)

This is somewhat misleading. According to that Wikipedia page, just using the US estimates, Ukraine has had 70k deaths and Russia has had 120k+. While these are similar in that they both round to 100k perhaps, Russia has almost double the Ukrainian military personnel losses.

War is miserable, but I don’t think Ukraine is losing military personnel by nearly the same clip that Russia is.

[-] AliasAKA@lemmy.world 34 points 5 months ago

This is such a bad look for Apple. Like we get it, you’re a trillion dollar dragon sitting on your horde. But like, dude, innovate instead of sitting there. You shouldn’t be afraid of side loading. Steam has shown that if your experience is the best, you can do fine. Apple just realizes they wouldn’t have the best App Store experience and would lose revenue. Tough shit.

[-] AliasAKA@lemmy.world 43 points 6 months ago

MultiLogin is a Chromium feature that can be abused to compromise a user's Google account. The "bug" was unveiled by a malware developer known as PRISMA in October 2023. The cyber-criminal shared details about a critical exploit designed to generate persistent cookies for "continuous" access to Google services, even after a user's password reset.

Oof. Another good reason to use Firefox I guess?

[-] AliasAKA@lemmy.world 40 points 6 months ago

Fish don’t really swim, they are flying through the water.

[-] AliasAKA@lemmy.world 101 points 8 months ago

https://www.nature.com/articles/s41557-023-01346-3

Nature article.

It should be punishable by fine for science journalists to write about a science paper without citing the paper — I couldn’t find it linked anywhere in the article but do have some content blockers so perhaps it was just hidden by those. At any rate, interesting findings.

[-] AliasAKA@lemmy.world 95 points 9 months ago

If Ford fires workers, that’s a no from me on purchasing any vehicles from them in the future.

I’d rather pay a 2 thousand dollar premium on a new vehicle that’s union made than pay 2 thousand dollars less for a shoddy piece of crap made by inexperienced and overworked / underpaid workers.

[-] AliasAKA@lemmy.world 123 points 9 months ago* (last edited 9 months ago)

What Israel does is as you described. But can we please not use whataboutism to try and justify barbaric behavior? This is grotesque. Things done to Palestine are grotesque. Let’s just call evil things evil and not try and say “hey cause someone else did an evil this evil is okay.”

18
submitted 10 months ago by AliasAKA@lemmy.world to c/3dprinting@lemmy.world

TLDR: is the buzzing in linked video normal / okay / expected? If not, is there a way to fix it?

I’ve just been putting my Creality K1 through it’s paces, and after using up all the hyper PLA that came with the unit, started printing some inland black basic PLA. Since then, I’ve noticed some buzzing sounds on either pure x axis or pure y axis moves. Video attached showcasing it. It doesn’t seem to create any buzzing on infill moves or perimeters that have a radius. Any straight lines though seem to cause the buzzing. Prints seem okay (though inout shaper seems off for sure looking at corners). I don’t remember it happening with the hyper PLA which I printed at the same speed (I am printing the black inland at higher temp to compensate for reduced flow).

Thanks for any help or feedback! Enjoying the community on Lemmy here so far :)

7
submitted 10 months ago by AliasAKA@lemmy.world to c/3dprinting@lemmy.world

My Creality K1 bed is actually in pretty good shape (max deviation of 0.7mm left to right, 0.1mm back to front), but I recognize that many folks might have beds that are off as much as 1.5 or more mm. The K1 has 3 lead screws, but not proper 3 point leveling (maybe someone will create a daughter board and a 3 point conversion kit in the future, after Creality open sources their firmware for the K1 series -- anyone out there that does this, I'd probably throw some small amount of money at you).

As far as I understand it, there are currently two methods to properly tram your bed:

  1. Follow the creality way, which is essentially immobilize the bed with shipping screws and retension the belt that synchronizes the 3 Z screws. To do this, you must turn the printer on it's side, remove the bottom panel, and fight the tensioner. Reports are mixed luck doing this.

  2. Skip teeth. You still have to do the bottom removal, but instead of completely removing the belt and detensioning, you slip the teeth on the belt drive (I think this is something like 0.4mm for each slipped tooth). There is less information about this, but there's a video in Chinese showing someone doing it. Perhaps a more helpful guide would democratize this more, and it might have more success than 1?

My question is: there are grub screws on the 3 lead screws, on the top side, accessible from the printer cabinet -- would it be possible to loosen the grub screws, so the z rod in that position spins freely, turn that z rod just slightly, then reseat the grub screw? That would seem a lot easier to relevel the bed, than doing either of the above procedures. Am I missing something?

view more: next ›

AliasAKA

joined 11 months ago