[-] Flexaris@discuss.tchncs.de 5 points 3 days ago

I feel like ars is really putting out a lot of articles about Starliner. Well deserved I would say.

[-] Flexaris@discuss.tchncs.de 3 points 5 days ago

I feel like they did more musical stuff in the early years and later it fizzled out a bit. In no particular order Mr burns be my vest Canyonero And basically all the other mentioned already are great

[-] Flexaris@discuss.tchncs.de 12 points 5 days ago

Well expecting people to know that exact part from the episode number is expecting a bit much. Being salty about it doesn't help your case. It's just not that funny either.

[-] Flexaris@discuss.tchncs.de 50 points 5 days ago

Does 'hand to mouth' mean it's being sent away and used as soon as it's produced?

[-] Flexaris@discuss.tchncs.de 14 points 6 days ago

This seems really bad. Debris high up is the worst from what I've read as it will decend into the orbits of everything below it. Anything below it is at risk. Debris at lower orbit has less in its path and will more likely just fall down and burn up. This seems so irresponsible.

[-] Flexaris@discuss.tchncs.de 32 points 1 month ago

Why would I root for any billionaire and what would for?

[-] Flexaris@discuss.tchncs.de 27 points 1 month ago

By allowing Russia to expand it further provokes the west to use nuclear weapons. Huh, guess we're at a deadlock. I guess Russia could give back what they stole.

[-] Flexaris@discuss.tchncs.de 25 points 2 months ago

No, you can't short the pads. If there's no capacitor there then there likely never was unless you can see obvious damage. Not all components are placed when manufacturing. A picture would help but it could be a decoupling capacitor which has been deemed unnecessary or not required for the model. So it's unlikely to be the issue. It could still be other capacitors that are getting old but it would be the electrolytic ones.

[-] Flexaris@discuss.tchncs.de 59 points 4 months ago

There was one time when I put a mold filled with liquid water in a cold container and made solid water.

[-] Flexaris@discuss.tchncs.de 84 points 6 months ago

Is it all of them?

9
[-] Flexaris@discuss.tchncs.de 17 points 9 months ago

How do you mean? Like cracking the knuckles or snapping the fingers?

[-] Flexaris@discuss.tchncs.de 17 points 1 year ago

So it was difficult to detect but it's by radar that they were detected? No other explanation for how they were detected was given.

7

I'm changing the PTFE in my heatbreak, I didn't realize these seem to be consumables. It started causing blockage.

A guy sent me a piece of PTFE from his Prusa MK3S+ that I could try as i was having trouble finding any PTFE quickly.

I realized I couldn't just cut a piece and put it in, that caused a lot of filament leakage and underextrusion. The end of the PTFE toward the nozzle was a bit jagged and I believe that's where the leakage happened. Now I'm wondering how the heatbreak and nozzle normally interface inside the heatblock, should they be touching? Should the PTFE protrude a bit from the heatbreak so there's a bit of pressure against the nozzle when I screw it in?

1

I'll sometimes filter based on "most popular" and the result will be that the top item is som expensive thing that makes me wonder if it's really the most popular. It seems obvious that this might just be a way for the store to manipulate buyers. Does anyone have insight into how these work and is there any real function behind them?

30
Bodes Galaxy (discuss.tchncs.de)

This was the last object I worked on before I took a break. I think I got a total of about 8 hours of HaRGB. I used an NEQ6 mount and William Optics Zenithstar 73

view more: next ›

Flexaris

joined 1 year ago