I'm an Indian guy in my twenties, living in US. I used to have cornflakes and the like for breakfast, but recently I turned lactose intolerant. I hate cornflakes without the milk.

There are a lot of breakfast options coming from my culture, but I need something that doesn't take time to make. I'm a lazy bum and can barely make it in time to my university as it is. If anyone has ideas, please let me know.

Is he stupid?

Update: Sorry guys, looks like I just needed to reboot the public server.

My goal is to forward port 8096 from my private server to my public server. That, is any traffic at public server's port 8096 should be tunneled to port 8096 of my private server and back.

I've set up a wireguard tunnel and ping is working from one device to the other. In this, 10.8.0.1 is the private server and 10.8.0.2 is the public server.

Here are my config files (/etc/wireguard/wg0).

***
On the public server
***
[Interface]
Address = 10.8.0.2/24
ListenPort = 51820
PrivateKey = *****************************************

# packet forwarding
PreUp = sysctl -w net.ipv4.ip_forward=1

# port forwarding
PreUp = firewall-cmd --zone=public --add-port 8096/tcp
PreUp = iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 8096 -j DNAT --to-destination 10.8.0.1:8096
PostDown = iptables -t nat -D PREROUTING -i eth0 -p tcp --dport 8096 -j DNAT --to-destination 10.8.0.1:8096
PostDown = firewall-cmd --zone=public --remove-port 8096/tcp

# packet masquerading
PreUp = iptables -t nat -A POSTROUTING -o wg0 -j MASQUERADE
PostDown = iptables -t nat -D POSTROUTING -o wg0 -j MASQUERADE

[Peer]
PublicKey = *****************************************
AllowedIPs = 10.8.0.1

***
On the private server
***
[Interface]
Address = 10.8.0.1/24
PrivateKey = *****************************************

[Peer]
PublicKey = *****************************************
AllowedIPs = 10.8.0.2
Endpoint = <public-server-addr>:51820
PersistentKeepalive = 25

Now, I'm trying to test the connection using netcat. I'm listening from my private server using nc -l 8096 (I've made sure that the port is unblocked) and trying to connect from a third device using nc <public-server-addr> 8096 but it's not working.

I have no idea what's going on here. Some help from experienced people is very appreciated.

Being Indian, it was a constant source of annoyance for me how hating on India and Indians was normalized, and almost seen as cool on Reddit. I haven't seen it on Lemmy so far.

It was weird, since hating black people or asians was frowned upon (as it should be). But for some reason, Indians were fair game.

Gotta say, it feels better when people don't try to insult you for your identity. I never took them seriously, but it was very annoying indeed.

!suddenrealization@lemmy.sdf.org

/c/suddenrealization@lemmy.sdf.org

It shows that there are 12 posts, but I'm unable to see them. It's a local community that I moderate. I tried to make a post. There were no errors. I'm even able to access the post here but it's not visible in the community. The post doesn't show up on my profile either. But there are some posts visible if I look at them from another instance e.g. through lemmy.world. The linked posts still doesn't show up, but could be due to delay in federation.

Edit: Just checked, this post doesn't show up on my profile either. But if I make a comment on another instance, it does show up on my profile. Weird.

UPDATE: It was happening due to a very stupid reason. I had unchecked "show read posts" in my settings. I do think that this isn't intended, since it should only affect the homepage/feed/whatever it's called here and not the profile pages and communities.