My old sandisk SATA ssd was starting to get really slow for some reason. The SMART data and the sandisk SSD dashboard app were saying the SSD was healthy, but its performance wasn't anywhere near what it was when brand new.
When benchmarked, it was all over the place with looong access times:
Sooo I decided to take the opportunity to upgrade the SSD to something faster - ended up grabbing a Transcend 512GB drive, with onboard DRAM
There were two problems though:
- My motherboard doesn't support NVMe (at least officially)
- My only available PCIe slot is an x1/single lane
After researching, I realised that the single PCIe lane would still give me almost 1GB/s in real world usage - even though its far from the 3GB/s the drive is rated for, it's double the speed of SATA and it's worlds apart from my Sandisk ssd lol.
Ordered an NVMe to PCIe adapter, and proceeded to chop up my PCIe slot to make it fit:
PCMR NSFW
It took a while since I don't own a dremel 🤪
Once that was done, I kapton taped up the exposed metal bits on the NVMe adapter, that could short on a mobo heatsink nearby.
In it goes!! (The GPU went in after the pic lol)
After re running the benchmarks, OMG the speed difference is insane, although it's limited by that single PCIe lane.
I was caught off guard by something else though. After cloning my existing install to the new NVMe SSD, it booted right up, with the original Sandisk drive gone. My BIOS does not even recognise the NVMe drive as a disk drive, and there are no settings anywhere in there for it.
BIOS person, thank you whoever you are, you saved me needing to do more jank to get my unsupported NVMe drive working!
I am more than happy so far with the dramatic speed increase compared to the SATA drive. I can now actually shut down my desktop when I'm not using it 🥲
![](https://images2.imgbox.com/68/62/xRUy13M5_o.jpg)
Cutting the back of x4/x8 slots is pretty common. Some motherboards even have open back slots as default.
Great work, OP. A very nice and well thought out upgrade (most folk skip the kapton tape).
It's worth everyone knowing that pcie slots are generally universally compatible. So a GPU (wanting 16x slot) can run in a 1x physical slot (infact this is how GPU mining expansion rigs work).
I don't think I've ever encountered a pcie card that will not function at all unless it receives it's required lanes.
One of the few things that'd be problematic would be the x16 -> quad M.2 cards which use PCIe bifurcation.
Lanes 1-4 from the socket are wired to the first M.2, 5-8 to the 2nd, etc.
It would still work (by some definition of the word), but in the sense that the first M.2 drive would get 1 lane and any others wouldn't be connected.
(Quad M.2 boards with a "PLX" or other PCIe switch chip would work fine with 1 upstream lane serving all 4 drives)