First, I would caution against exposing services to the internet. It would be far better to leave everything behind a VPN that only you or trusted peers can access.
Past that you can use tools like OSSEC, Snort, and fail2ban.
First, I would caution against exposing services to the internet. It would be far better to leave everything behind a VPN that only you or trusted peers can access.
Past that you can use tools like OSSEC, Snort, and fail2ban.
Thank you. Is leaving everything behind a vpn what Tailscale does?
Tailscale is a mesh network. It's all encrypted, like a VPN, but not exactly the same thing.
It's kind of like each member of the network having a VPN connection to every other member of the network.
Tailscale has a neat feature called Funnel, which funnels specified inbound traffic from the internet to a specific resource/service/device.
That traffic is encrypted too, starting from the entry point (which is hosted by Tailscale).
This can be useful for example, for something like Nextcloud, so clients don't have to run the Tailscale app to get access.
Yes
That's what I do, everything local only and then remote access through Tailscale
Yes, a VPN with strong authentication is what you want.
It's not a simple task, so I won't list many specifics, but more general principles.
First, some specifics:
Generally:
You mentioned using cloud flare, which is good. You might also consider configuring your firewall to disallow outbound connections to your local network. That way if your server gets owned, they can't poke other things on your network.
only expose things you must expose. It's better to do things right and secure than easy. Exposing a webservice requires you to expose port 443 (https). Basically everything else is optional.
Not sure if it's always possible but I setup an auth portal via port 443 where I'm using authelia and fail2ban, and using traefik to route authenticated users to other ports from there. So for example Plex 32400 is not exposed, only 443. But you get there via 443 and authentication.
Yup, that's a really good pattern to follow. Not only does it minimize your exposure behind a secured entry, it also makes sure that all of your access is uniformly authenticated.
You have to do some shenanigans to do something similar with other, non-http based services, but it's possible with most of them.
Does that still allow other Plex users the ability to play remotely without having to use Plex relay?
Ayy, nice work getting started down the selfhosting route! Start by remembering that security is a maturity process. To find out if you're doing the right things at the right time, ask yourself:
If you're just one person and it's a self-hosted home setup, remember you can't patch all the things all at once. Asking yourself regularly if you maturing your environment over time is essential. Do a little work each week and you'll make good progress.
When I think of security, I think of a few things
Authentication & Access - each system should have just enough accounts with just enough permissions to get work done. Change default passwords. Make them long and unique. Use MFA whenever possible (often impractical for self-hosted; cut yourself slack when this is the case!). A note on logging - if you can, while you're doing this homework, check how long it saves logs. Shoot for keeping logs longer if possible; I like 30 days, but you might want more. Also make sure you have a time server, or at least that you're getting accurate time stamps. If something weird happens and you're investigating, having timestamps on logs that line up and make sense helps you recreate what happened, so you can decide if you need to wipe something and reload it.
Patching - automated scanning of your stuff for vulns would be fantastic if you're interested in going that route, but a Saturday morning checklist to run updates on everything works too.
Attack Surface Management - if you're not sure you're exposed, scanning externally can be a big help. I have a Racknerd server ($40/yr, it's amazing) in San Diego and I periodically run scans of my home network to see what's forwarded. This is using nmap, although I could also use a free version of Nessus Essentials on there. This gives me an idea of what I look like from outside my network.
Inventory - do you know what you have, and what's it doing? Even a pencil drawing of your network, IP addresses, and services they have can come in super handy. While big orgs have an index of critical data and where it's stored, just knowing what containers are running on which VM or physical box can help if stuff goes sideways. I redraw mine periodically, yes it's hand drawn because it's fast and does the job lol. Do what works for you, though, to keep an inventory of your stuff. You need to know what you have, what it does, and where it's supposed to be going.
Thanks to everyone who took the time to answer. How do I check if my server has been accessed?
trough ssh when you connect to your machine run :
lastb -10
This will show you the last 10 login failed attemps you can change to 20 or whatever
you can also run: last -10 to see the last successful logged in
use :
more history
to see all the commands that someone have typed
on the dir /var/logs you have a lot of another logs too
for more paranoid level use
netstat -a
This will show you all incoming and outgoing communications
and like the others said considere using firewall and fail2ban
Note: don't relly to much on firewalls since they are easy to bypass
keep all softwares updated
read frequently about new vulnerabilities if there is some vulnerability that affects your software until gets patched turn of that service.
Thank you!
Have a look at Tailscale for your devices, this will prevent you from having to expose anything to the Internet, but rather having it behind your own VPN solution. Tailscale is the kinda service that is stupid easy to get going with too. HIGHLY recommend it!
Thanks! I set it up last night after getting advice here!
Hey don't mean to hijack, I know tailscale isnt necessarily a tunnel (correct me if I'm wrong) but does it provide the typical issues with apps like android auto not working while connected to a VPN?
Neber tried it with Android Auto before, but I doubt it would, it's a mesh vpn - not a typical vpn(proxy). So Tailscale is mostly for connecting your own devices together, however it's possible that configure it to use Mullvad for exit nodes, if needed.
You just don't and pray for the best /j
This is honeypot security and is a best practice
/s
Set up a weekly or at least monthly reminder to check for updates. That's the most important thing to do. Outdated packages may have known security vulnerabilities.
Better yet, setup automatic upgrades. The occasional breakage are more than worth it.
I just enjoy putting on a hoodie, turning down the lights, and running updates manually every couple days. Makes me feel like hackerman
I don't have anything to offer but I have a question since I'm on a similar quest. I'm also a n00b when it comes to Docker even though I have best intentions to learn it eventually. In the coming days I want to set up a similar server for photos backup and I was hoping to go with Immich too.
I have heard that Immich occasionally provides updates that are breaking in nature. How does Tipi handle it in such circumstances?
We're in a similar spot! I had the same question and unfortunately I don't know, I've only seen one update come through Immich since I've had it and it was non-breaking. Tipi just said "check the release notes before updating" -- I clicked the "update" button in Tipi and Immich magically updated. My plan if there are more breaking updates is to check out the Tipi Discord and ask there.
Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I've seen in this thread:
Fewer Letters | More Letters |
---|---|
IP | Internet Protocol |
Plex | Brand of media server package |
VPN | Virtual Private Network |
3 acronyms in this thread; the most compressed thread commented on today has 11 acronyms.
[Thread #573 for this sub, first seen 5th Mar 2024, 03:05] [FAQ] [Full list] [Contact] [Source code]
A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don't control.
Rules:
Be civil: we're here to support and learn from one another. Insults won't be tolerated. Flame wars are frowned upon.
No spam posting.
Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it's not obvious why your post topic revolves around selfhosting, please include details to make it clear.
Don't duplicate the full text of your blog or github here. Just post the link for folks to click.
Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).
No trolling.
Resources:
Any issues on the community? Report it using the report flag.
Questions? DM the mods!