Mine are drifting but I haven't had the emotional capacities to figure out what to do now
this post was submitted on 15 Dec 2025
42 points (97.7% liked)
Steam Hardware
20122 readers
240 users here now
A place to discuss and support all Steam Hardware, including Steam Deck, Steam Machine, Steam Frame, and SteamOS in general.
As Lemmy doesn't have flairs yet, you can use these prefixes to indicate what type of post you have made, eg:
[Flair] My post title
The following is a list of suggested flairs:
[Deck] - Steam Deck related.
[Machine] - Steam Machine related.
[Frame] - Steam Frame related.
[Discussion] - General discussion.
[Help] - A request for help or support.
[News] - News about the deck.
[PSA] - Sharing important information.
[Game] - News / info about a game on the deck.
[Update] - An update to a previous post.
[Meta] - Discussion about this community.
If your post is only relevant to one hardware device (Deck/Machine/Frame/etc) please specify which one as part of the title or by using a device flair.
These are not enforced, but they are encouraged.
Rules:
- Follow the rules of Sopuli
- Posts must be related to Steam Hardware or Steam OS in an obvious way.
- No piracy, there are other communities for that.
- Discussion of emulators are allowed, but no discussion on how to illegally acquire ROMs.
- This is a place of civil discussion, no trolling.
- Have fun.
founded 4 years ago
MODERATORS
It sounds like replacing them with Hall effect thumb sticks is really easy. It’s on my list of upgrades if I ever notice an iota of drift.
It's super easy, I did it just to have better thumbsticks.
does it require soldering for the thumb presence sensors?
It used to, but all the popular replacements are now solder free.
Awesome! Not that I'm opposed to learning how to solder, but not needing to when my Deck's sticks start to drift is a relief
What Fubarberry said.
A couple things to try:
-
A lot of thumbstick drift is caused from getting debris or sticky residue in around the thumbstick. This is especially common if you let your kids touch your Steam Deck/controllers. Taking some plastic-safe electronic cleaner spray (like CRC QD electric cleaner) and spraying it around the thumbstick while the deck is turned off can fix this pretty easily, and the same cleaner can be used to fix other controllers (especially nintendo switch joycons) as well as sticking controller buttons.
-
The steam deck has adjustable dead zones. If your drift is very minor, you can increase the size of the dead zones to compensate.
-
It's possible to recalibrate the thumbsticks, see this guide
-
Replacement thumbsticks are available on Amazon, many people like to upgrade to hall effect sticks made by Gullikit or other companies. Ifixit has guides for both the right and left thumbsticks. Important to note with this, there are 2 models of LCD thumbsticks and 1 model of OLED joystick, you need to buy the same type of thumbstick as what your Deck already has (edit: looks like the gullikit LCD stick now works for both LCD types, it has a micro switch on the joysticks to select which type you have). The Ifixit guides explain how to check which LCD type you have. Actually replacing the thumbsticks involves popping the back off the deck (with the microsd removed), disconnecting the battery, unplugging a ribbon cable from the thumbsticks, and then removing a couple screws before pulling the whole thumbstick out. After the new thumbsticks are installed, you will have to follow the callibration guide listed above under #3.
Thank u so much, I'm gonna try fixing it during the holiday
Buy the steam controller when you can and connect them together.
Got the Deck at launch. No issues with drift.
When I opened it to swap the SSD I preemptively changed the joysticks with electromagnetic ones from Gulistick. (LCD Model)
It was really quite straightforward, but I would suggest being familiar with some soldering prior (if you want the capacitive touching function). Otherwise, they have great instructions. The case is great for holding it screen down while you work.
They've been great, no complaints.
As far as I know, I think all the designs have been updated to not need soldering.
Oh very cool! Even easier then
No issues yet, but I'm docked and using M&K or external controller probably 85% of the time or so.
I plan to keep my Deck as my stream-to around the rest of house device far into the future (read: until it disintegrates, the ergonomics and form factor are that good), even after my next upgrade to the Steam Machine or similar option, so I will be Hall-replacing the sticks if / when they start to drift.
@Fubarberry No drifting but on mine, the rubber got loose. I replaced them with Hall effect joysticks. It was easy and I had no problems whatsoever since.
No drift yet, got an original 64gb basic edition. But I also barely use the thing, so that probably contributed to the longevity.
I did swap the SSD basically as soon as I got it, was trivial. Thumb sticks aren't much harder as they are on daughter boards. Hard to fuck that up.
The inspiration for this discussion is that the capacitive pad on my left thumbstick has started to peel upwards at the bottom, so I plan to replace it soon. Haven't had any issues with drift or anything else.
Yeah I got drift in the left stick after only a year of owning my Steam Deck OLED. I haven't bothered to replace it yet. I've always been very careful with my Steam Deck too.
My left stick squeaks so I'm thinking about replacement but I can't get a straight answer about Hall effect stick compatibility with OLED models
They make specific hall-effect sticks for the OLED models, I know Gulikit make a set, possibly other companies too.
My left stick started jittering after a year. Switched the sticks out with Gulikit, and they were fine for a few years, then the right stick went bonkers psycho.
Replaced it with a̶n̶o̶t̶h̶e̶r̶-b̶r̶a̶n̶d̶ Gulikit again, cuz that was the only make available. Sigh.