this post was submitted on 21 Jan 2026
37 points (97.4% liked)

Linux Gaming

23899 readers
161 users here now

Discussions and news about gaming on the GNU/Linux family of operating systems (including the Steam Deck). Potentially a $HOME away from home for disgruntled /r/linux_gaming denizens of the redditarian demesne.

This page can be subscribed to via RSS.

Original /r/linux_gaming pengwing by uoou.

No memes/shitposts/low-effort posts, please.

Resources

WWW:

Discord:

IRC:

Matrix:

Telegram:

founded 2 years ago
MODERATORS
 

SOLUTION EDIT:

So my solution has been to order a refurbished Turtle Beach Stealth 600 Gen2 with the dongle. It was $100 cheaper than the gen3 and I'm not that flush with cash that $100AUD doesn't make a difference to me.

I can use the LDAC codec with the XM4s but it switches the mic off. I can't get stereo and mic working at the same time likely due to the limitations of the bluetooth protocol.

I was also considering a blue yeti mic on a boom but it was looking to be the same price as the Turtle Beach refurbs.

Thanks everyone for all your input. Much appreciated.

ORIGINAL POST:

Hi everyone.

So I'm trying to use my Sony wireless cans over bluetooth for Arc Raiders and the mic isn't very good at all. It's better in discord but my friends tell me it's still not great.

I'm aware of bluetooth duplex quality issues. It used to work fine on Windows 10 but is struggling on Bazzite. I'd love to just tinker with some settings or drivers and have it work so I don't have to buy anything else.

I'm prepared to buy a wireless headset with 2.4ghz dongle but don't know what's good.

I'm also prepared to buy a microphone and just use the headset as headphones only.

I've done about five years help desk support so would strongly prefer not to be physically tethered to my computer.

Thanks for any advice.

top 33 comments
sorted by: hot top controversial new old
[–] strongarm@lemmy.dbzer0.com 11 points 1 week ago (1 children)

I have a set of Sony's and I have to use an external mic otherwise it sets the device to hands free mode and the sound quality I hear is terrible, and in mono I think.

Keep the device in headset mode and any codec will do. I haven't found much difference.

[–] SaneMartigan@aussie.zone 2 points 1 week ago (1 children)

Yep. It was definitely switching to mono which is no good for spatial gaming.

[–] strongarm@lemmy.dbzer0.com 3 points 1 week ago

Yeah that's the issue then, as you correctly identified HD audio is not possible with microphone over a normal Bluetooth protocol. All other devices seem to have some kind of dongle and use a proprietary local wireless protocol instead.

[–] serpineslair@lemmy.world 6 points 1 week ago (4 children)

Yeah I have these same headphones, and hate to break it to you, but I've only managed to successfully use them for listening to music only. As soon as you put em in headset mode, the audio quality drops to shit, regardless of codec. I also had the same problem on windows as well as linux though.

I personally have a turtle beach headset for gaming, comes with its own dongle, plug and play on any os I've tried. Sound quality obviously not for audiophile uses, doesn't quite compare with the Sonys but for gaming, they more than meet the requirements, still plenty of bass etc. I must've had em, shit, like 7 years maybe? Maybe more? Still going strong with zero issues. I've got the older generation with micro usb connector. I have relatives with the newer gen (with usb c, smaller dongle) and they are even more comfy, and again, zero issues after a couple years or so.

Okay so they look at little different to what I remember so they may well have brought out a new generation by the looks of things. I must have gen 1, then a couple friends/relatives have gen 2, they've got gen 3 out now. Do a little homework first but more than likely they will be great. They are the Turtle Beach Stealth 600.

Apologies if this reads like an ad, just offering advice lmao. Ignore my last two paragraphs if u aint interested in my opinion.

[–] vividspecter@aussie.zone 5 points 1 week ago

Yeah I have these same headphones, and hate to break it to you, but I’ve only managed to successfully use them for listening to music only. As soon as you put em in headset mode, the audio quality drops to shit, regardless of codec.

This is just inherent to the blutooth audio protocol. Put it in headset mode, get trash tier audio quality or disable the mic and get acceptable quality audio. There might be some proprietary extensions that bypass this but they aren't likely to be supported on Linux.

LE audio should be better in this respect, but it's not widely yet (and not by the XM4)

[–] SaneMartigan@aussie.zone 2 points 1 week ago (1 children)

Thanks for the recommendation, I found a cheap pair of TBS 600 gen2 refurbs so I'm going with that.

[–] serpineslair@lemmy.world 2 points 1 week ago (1 children)

Yeah I have the gen 1. But my relative has the gen 2 in white and they have been great. Enjoy! Let me know how you get on!

[–] SaneMartigan@aussie.zone 2 points 4 days ago (1 children)

Got the gen2s and they're great. Thanks again.

[–] serpineslair@lemmy.world 1 points 4 days ago

No problem! Glad to hear it worked out!

[–] SaneMartigan@aussie.zone 2 points 1 week ago (1 children)

Thanks. I was already looking at the Turtle Beach as an option so it's no ad to me.

[–] vividspecter@aussie.zone 2 points 1 week ago

Have at look at the AKG N9 too. Great quality audio (and has an EQ profile on AutoEQ if you want to enhance it further) and low latency + high mic quality since it uses a device specific 2.4ghz protocol.

Downside is that the dongle is only supported by the exact headset and you can't easily replace it, so don't lose the thing. We really need a audio specific protocol that isn't tied to bluetooth I think, but it is what it is.

[–] scala@lemmy.ml 1 points 1 week ago (1 children)

I also have these same headphones. They work well but often switch to mono when joining in-game chats. It's quite annoying.

On top of that, if you manually swap back to SBC or AAC your mic stops working. Such fun.

[–] serpineslair@lemmy.world 1 points 1 week ago (1 children)

What the turtle beach, or did u mean the sonys?

[–] scala@lemmy.ml 2 points 1 week ago (1 children)
[–] serpineslair@lemmy.world 1 points 1 week ago

Yeah, they are a pain at times.

[–] iturnedintoanewt@lemmy.world 5 points 1 week ago* (last edited 1 week ago) (2 children)

Check on the audio settings what codec is actually in use? I have the XM5. I haven't used bazzite specifically, but on the steam deck they work well (for playback only, I don't play online). On KDE they work well for zoom calls. On some occasion they might connect... Wrong, using the most basic Bluetooth profile. And then they do sound like ass. Restarting Bluetooth usually fixes it, if reconnecting is not enough.

[–] SaneMartigan@aussie.zone 2 points 1 week ago (1 children)

There's five codec options. I'll have a tinker and see if I can get a better one going. Thanks for the input.

SBC / SBC-XQ / AAC / CVSD / mSBC

The first three are listed as High Fidelity Playback A2DP link. The last two are Headset head unit HSP/HFP.

[–] burrito@sh.itjust.works 2 points 1 week ago (1 children)

LDAC is the highest quality codec you can use on those. I'm not sure if you can do a microphone profile with it. Search your distro's package manager for ldac and it should give you a package to add it.

[–] SaneMartigan@aussie.zone 1 points 1 week ago (2 children)

Thanks, I'll see if I can work it out for Bazzite.

[–] burrito@sh.itjust.works 2 points 1 week ago

And you have to disable the two device connection setting on the headphones to use the LDAC codec on them. That threw me for a loop on mine for a bit when I was trying to get it enabled.

[–] entropicdrift 2 points 1 week ago* (last edited 1 week ago) (1 children)

FYI, SBC-XQ should be functionally just as good as LDAC and doesn't require nearly as much fiddling because it's an open standard.

[–] SaneMartigan@aussie.zone 2 points 1 week ago

Thanks. That's what I've been using. I played with the codecs with friends on discord giving feedback.

[–] SaneMartigan@aussie.zone 2 points 1 week ago* (last edited 1 week ago) (1 children)

What was happening was the codec was dropping back to mono in order for enough bluetooth bandwidth to also transmit the mic. I don't think there was a way around it, it's a pure hardware limitation at this point. I could manually change the codec to a high quality option but it'd kill of the mic. I've ordered a new headset with dedicated 2.4ghz dongle. Thanks for your help.

[–] iturnedintoanewt@lemmy.world 1 points 1 week ago (1 children)

That sounds like...a hardware issue. Maybe the antenna is broken? Any normal codec would work up to a certain distance of several meters. Unless the antenna is being blocked.

[–] SaneMartigan@aussie.zone 1 points 1 week ago

Nah, it's bluetooth only has so much bandwidth. It can send stereo sound but not mic or mono sound with mic.

[–] Willdrick@lemmy.world 4 points 1 week ago (1 children)

Never got my Bose QC35 ii to work properly, seems like a limitation of Bluetooth. Ended up buying a yeti snowball and its far better than any headset mic I've ever used.

[–] Holytimes@sh.itjust.works 0 points 1 week ago (2 children)

A good mic is 200 bucks, good pair of headphones is 200 bucks.

It cost more to shrink something's size and keep the same quality.

So unless your headset costs like 600+ dollars either the mic is shit or the headphones are shit. Typically both.

So unless you fucking hate money for some stupid reason. Stop buying shit headsets.

[–] Siegfried@lemmy.world 2 points 1 week ago

Thats the cost of a professional mic, not of an "i just need to talk to my friends" mic. And at least wh 1000mx4 comes with 5 mics. The thing is, they arent intended to be used as mics per se but for noise cancelling.

I think its more of a Bluetooth limitation.

[–] SaneMartigan@aussie.zone 1 points 1 week ago

The Sony's were $500 at release. The shortfall was the bluetooth protocol not being able to handle stereo sound and a microphone at the same time. They're still a great NC headset just not for gaming.

[–] apftwb@lemmy.world 4 points 1 week ago* (last edited 1 week ago) (1 children)

That model of headphone supports two Bluetooth profiles. High Fidelity Playback (A2DP Sink) or Headset Head Unit (HSP/HFP).

Check your audio GUI to see if you can fiddle with that. Might be listed as "configuration".

What is your DE? Using Pipewire or PulseAudio?

Edit: A2DP doesn't support microphone input. This might be a dead-end.

[–] SaneMartigan@aussie.zone 1 points 1 week ago

It was, whenever I loaded into a game or discord channel it'd drop back to mono HSP which killed any spatial sounds from the game.

[–] Ludrol@szmer.info 3 points 1 week ago

I have a bit different setup but I pipe my USB mic through easy effects to filter out really nasty feedback loop.

If you can't dial the filters in a way that audio is acceptable then your only option would be to get a better mic.

[–] boaratio@lemmy.world 2 points 1 week ago

I have a set of Beats Studio Pros and have the same issue. I got it to work a year or so ago after a bunch of tinkering, but have no clue what I did. I just use a wired mic when I play Arc raiders.