70

I have noticed phones with a handset (like the one in the image) have a little cover that resembles something like a cold camera shoe under the bottom of the handset's top speaker holder. Is there a use for it? It has a line bump in the middle, but it doesn't go all the way from both sides, it leaves a gap. I have also seem some of them have extra space on the top of the cover, and some don't.

top 50 comments
sorted by: hot top controversial new old
[-] transientpunk@sh.itjust.works 141 points 11 months ago

What in the world is a cold camera shoe?

[-] I_Fart_Glitter@lemmy.world 57 points 11 months ago

It's a slot on a camera that you can use to attach accessories, like a microphone or flash. A hot shoe provides power to the accessory, a cold shoe does not.

[-] snooggums@kbin.social 8 points 11 months ago
load more comments (1 replies)
[-] AnUnusualRelic@lemmy.world 10 points 11 months ago

Well, see what a hot camera shoe is?

Just Leave it outside for a while, and there you are.

load more comments (1 replies)
[-] azdle@news.idlestate.org 8 points 11 months ago

Its a non-powered version of a hot shoe, both of which are the thing you use to mount an external flash that's on the top of a lot of (all?) full sized cameras.

[-] turbulentMagma@lemm.ee 113 points 11 months ago

Why would you attach an image that does not show what you are referring to?

[-] AnUnusualRelic@lemmy.world 44 points 11 months ago

See fig. 1 (unrelated)

[-] reflex@kbin.social 96 points 11 months ago

What the heck is a camera shoe?

[-] RyruGrr@lemmy.world 32 points 11 months ago

I got mine in a set that came with a poop knife.

load more comments (2 replies)
[-] duckythescientist@sh.itjust.works 25 points 11 months ago
[-] Lucidlethargy@sh.itjust.works 27 points 11 months ago* (last edited 11 months ago)

Okay what's a "cold camara hot shoe" then?

[-] Maven 20 points 11 months ago

The "shoe" is the mount. "Hot" means powered, for things like flashes. "Cold" means unpowered, for things like tripods.

[-] echodot@feddit.uk 26 points 11 months ago

Right but there isn't anything that resembles that in the image

load more comments (2 replies)
[-] hperrin@lemmy.world 96 points 11 months ago* (last edited 11 months ago)

If you’re talking about this thing, it serves two purposes. It is the hook that opens and closes the line (hangs up and picks up the phone), and it is used by this thing

to keep the handset from falling off the base when it’s mounted on a wall.

[-] hperrin@lemmy.world 82 points 11 months ago* (last edited 11 months ago)

Or maybe you meant this thing. Yeah, it keeps the handset in when the base is mounted vertical. You can see that it’s slanted in the back.

That’s so it slides in and out on this other slanted lip on the handset instead of getting caught on it. You can take the handset off just by pulling it directly away from the wall.

[-] hperrin@lemmy.world 73 points 11 months ago

Btw, on Trimline phones it is reversible for if you’re not hanging it on a wall. It looks like this when you pull it out.

load more comments (18 replies)
[-] adespoton@lemmy.ca 40 points 11 months ago

Exactly this. It’s called a “hook” and when the phone is “off the hook” that’s the thing it is off of. Being off the hook means the phone is powered up and connected to the local loop. When the phone is “on hook” that means it is disconnected from the loop and awaiting the pulsed ring signal.

Desk phones have a reversible hook so that it keeps the button depressed when the phone is in the cradle but doesn’t catch when you attempt to pick it up.

On modem signals in the old days, the + was equivalent to “flashing” the hook, or quickly disconnecting and reconnecting to the loop, and the AT command H1 told the modem to go “on hook” while H0 told it to go “off hook”.

Back before the DTMF network, when everyone used pulse modulated phones, the “pulses” were caused by going in and off hook in a specific pattern. You could actually make a phone call from a rotary payphone by flashing the hook in the pattern that mimicked the rotary dial pulsing the line as it rotated back to home position.

In the really old days, the hand crank served much the same purpose, but actually supplied electricity to the local loop; when the phone was on hook (which was a big metal thing the earpiece sat in) someone else turning the crank would make all the phones on the loop ring; you picked up if the ring matched the number of rings for your extension.

[-] hperrin@lemmy.world 8 points 11 months ago

Yes! Another phone nerd!

One small clarification. There’s not really anything special to the pulses for pulse dialing. One pulse for the number 1, all the way to nine pulses for number 9, and then ten pulses for a number 0.

[-] froh42@lemmy.world 9 points 11 months ago* (last edited 11 months ago)

In the 80s there was a way to cheat phone booths in Germany: With a small tool that had an adjustment screw you could position the hook switch to an exact position where the phone booth had already connected the line but did not yet power up the rest of the machinery (including coin counters)

You could then call arbitrary nunbers by pulse dialing using the hook switch (the rotary dial was still powered down)

Basically a EU pulse dial version of phreaking.

My father, who died this year, used this a lot too make "free" calls in the 80s.

load more comments (2 replies)
[-] hperrin@lemmy.world 26 points 11 months ago

Much better than the older design which cannot be mounted on the wall.

[-] hperrin@lemmy.world 23 points 11 months ago

And the even older design that didn’t even have a bell integrated in the base. The bell was in a separate bell box.

[-] hperrin@lemmy.world 29 points 11 months ago* (last edited 11 months ago)

Or one of these real old designs that didn’t even have a bell. It has a buzzer that’s barely audible (it might even just be the phone’s speaker, idk). Also, the microphone and the earpiece aren’t in a convenient handset.

This one is a replica made in probably the 1970s or 1980s. It’s funny, when it was made it was a replica of something vintage, but now it actually is vintage.

[-] Vacationlandgirl@lemmy.world 16 points 11 months ago

You have a very interesting phone collection and I appreciate you sharing! Unlocked memories I didn't even know I had! 😃

[-] A_Very_Big_Fan@lemmy.world 14 points 11 months ago

Huge props for the unexpected old phone exhibition. It was very interesting, thank you :3

load more comments (1 replies)
[-] RootBeerGuy@discuss.tchncs.de 20 points 11 months ago

Well, cannot be wall-mounted like the one in your picture but those phones did get wall-mounted in slightly different shape. 1000038469

load more comments (4 replies)
[-] AnUnusualRelic@lemmy.world 8 points 11 months ago

Like and follow for more astonishing technologies from bygone eras!

(Do people really no longer have phones on their desks or what?)

[-] OneLemmyMan@lemmy.world 92 points 11 months ago* (last edited 11 months ago)

could had posted a picture of a horse it would be just as helpful but a lot funnier

[-] XbSuper@lemmy.world 69 points 11 months ago

You're description only leaves me with more questions. I have no idea what you're talking about, and therefore have no answer.

[-] echodot@feddit.uk 31 points 11 months ago

Lots of people in this thread answering the question but they're kind of just guessing what you're talking about.

Perhaps you could circle the bit in question because it's either a holder for the headset or a way to mount the entire device onto a wall or something else depending on if we've interpreted your words correctly.

[-] DarkGamer@kbin.social 22 points 11 months ago
[-] Kolanaki@yiffit.net 8 points 11 months ago* (last edited 11 months ago)

I'm pretty old and even have a camera that uses these things, and took a class on photography; never heard them called a shoe until reading this thread. 🤷🏻‍♂️

load more comments (3 replies)
[-] driving_crooner@lemmy.eco.br 22 points 11 months ago

English is not my first language and I don't understand what camera shoe mean. But I think I know what you're asking for. That phones can be mounted on a wall and what you're asking for is there so the handset doesn't fall off.

[-] yenahmik@lemmy.world 49 points 11 months ago* (last edited 11 months ago)

It's ok. English is my first language and I don't understand what OP means by "cold camera shoe."

load more comments (1 replies)
[-] name_NULL111653@pawb.social 12 points 11 months ago

Native English speaker here, I don't have a clue what a "cold camera shoe" means either...

load more comments (1 replies)
[-] criticon@lemmy.ca 11 points 11 months ago* (last edited 11 months ago)

This is the camera shoe for a Sony DSLR

Edit: note that this is a "hot" shoe because it has contacts that can power accessories. A cold shoe is just a mount. You can use to to attach a flash or a microphone for example

[-] FrickAndMortar@lemmy.world 15 points 11 months ago

Not sure if this is what you’re describing, but phones like the one you pictured have a reversible tab for use if you mount the phone to a wall - if the tab is sticking up, it keeps the receiver from falling off the cradle.

Here’s a site selling them, but it has a diagram showing where it’s located:

https://www.zcover.com/store/catalog/zCProduct.php?wp=WP_CI881CTR&zPath=212-213-255

load more comments (2 replies)
[-] Fortunatefool@infosec.pub 11 points 11 months ago
[-] al177 26 points 11 months ago

The intersection of people who aren't five figures into photography and know what a hot shoe is, and people who recognize a wall mount phone trend old.

load more comments (3 replies)
[-] azdle@news.idlestate.org 9 points 11 months ago

It's for a hook to keep the handset on when the phone is mounted flat on a wall. It can usually be slid/folded down or removed when its not need.

[-] oleorun@real.lemmy.fan 8 points 11 months ago

It holds the receiver in place. Generally the ridged end is used for wall hanging installs, the flat end stores it away until needed since the desk is horizontal.

load more comments
view more: next ›
this post was submitted on 05 Dec 2023
70 points (70.8% liked)

No Stupid Questions

35870 readers
1163 users here now

No such thing. Ask away!

!nostupidquestions is a community dedicated to being helpful and answering each others' questions on various topics.

The rules for posting and commenting, besides the rules defined here for lemmy.world, are as follows:

Rules (interactive)


Rule 1- All posts must be legitimate questions. All post titles must include a question.

All posts must be legitimate questions, and all post titles must include a question. Questions that are joke or trolling questions, memes, song lyrics as title, etc. are not allowed here. See Rule 6 for all exceptions.



Rule 2- Your question subject cannot be illegal or NSFW material.

Your question subject cannot be illegal or NSFW material. You will be warned first, banned second.



Rule 3- Do not seek mental, medical and professional help here.

Do not seek mental, medical and professional help here. Breaking this rule will not get you or your post removed, but it will put you at risk, and possibly in danger.



Rule 4- No self promotion or upvote-farming of any kind.

That's it.



Rule 5- No baiting or sealioning or promoting an agenda.

Questions which, instead of being of an innocuous nature, are specifically intended (based on reports and in the opinion of our crack moderation team) to bait users into ideological wars on charged political topics will be removed and the authors warned - or banned - depending on severity.



Rule 6- Regarding META posts and joke questions.

Provided it is about the community itself, you may post non-question posts using the [META] tag on your post title.

On fridays, you are allowed to post meme and troll questions, on the condition that it's in text format only, and conforms with our other rules. These posts MUST include the [NSQ Friday] tag in their title.

If you post a serious question on friday and are looking only for legitimate answers, then please include the [Serious] tag on your post. Irrelevant replies will then be removed by moderators.



Rule 7- You can't intentionally annoy, mock, or harass other members.

If you intentionally annoy, mock, harass, or discriminate against any individual member, you will be removed.

Likewise, if you are a member, sympathiser or a resemblant of a movement that is known to largely hate, mock, discriminate against, and/or want to take lives of a group of people, and you were provably vocal about your hate, then you will be banned on sight.



Rule 8- All comments should try to stay relevant to their parent content.



Rule 9- Reposts from other platforms are not allowed.

Let everyone have their own content.



Rule 10- Majority of bots aren't allowed to participate here.



Credits

Our breathtaking icon was bestowed upon us by @Cevilia!

The greatest banner of all time: by @TheOneWithTheHair!

founded 1 year ago
MODERATORS