[-] MetaCubed@lemmy.world 25 points 3 weeks ago

I think its probably possible to use a meme format without intending it to compare yourself to the subject of the meme

[-] MetaCubed@lemmy.world 70 points 1 month ago* (last edited 1 month ago)

Letter paper (8.5" x 11" | 215.9mm x 279.4mm) is kinda sorta pretty close to A4 (8.27" x 11.69" | 210mm x 297mm) so without having the two next to each other, it can seem like A4 is just a funny piece of letter, and vice versa. But to answer the actual question, USA and Canada (and apparently the phillipines???) use the "North American Standard" which is a terrifying mess in comparison to the beauty that is the ISO standard.

Edit: typos

[-] MetaCubed@lemmy.world 25 points 2 months ago

Apologies, my question wasn't rhetorical, I was genuinely looking for suggestions. I don't want to use kagi if this is who is running it... BUT all the alternatives that I'm personally aware of are not options for replacement.

[-] MetaCubed@lemmy.world 28 points 2 months ago

Can I sincerely ask what we're supposed to use instead?

Kagi has given me the best search experience ive had in at least a decade, I'm not going back to the enshittification engine, and everything else is just bing in fancy wrapping paper. Is there something else like Kagi? Is there something like DDG or Searx that arent just slightly better bing?

[-] MetaCubed@lemmy.world 31 points 3 months ago* (last edited 3 months ago)

TL;DR: IANAL, however, the document this bill references to define what content is harmful to children directly, verbatim defines sexual conduct as including "homosexuality" broadly

Okay so this bill is SB394 (linked above obviously) and it opens with the following

Any commercial entity that knowingly shares or distributes material that is harmful to minors on a website and such material appears on 25% or more of the webpages viewed on such website in any calendar month, or that knowingly hosts such website (...)

It carries on to later define "harmful to minors" in section h-3 as the following:

(3) "Harmful to minors" means the same as defined in K.S.A. 21-6402, and amendments thereto.

If we go look at K.S.A. 21-6402 we can find that it is regarding "Promotion to minors of material harmful to minors" and goes on to declare in section d-2 that "harmful to minors" refers to several things including sexual conduct (I'm omitting this full quote for brevity, you can find it in the linked document).

Now if we look a little further down, we can see that Kansas currently defines sexual content as defined in section d-8:

(8) "sexual conduct" means acts of masturbation, homosexuality, sexual intercourse or physical contact with a person's clothed or unclothed genitals or pubic area or buttocks or with a human female's breast; and (...)

Considering all this, i think extremely reasonable to believe that this could outlaw LGBTQ+ content from being displayed openly online within Kansas

Edit: fixed sexual conduct/content mixups

10
submitted 3 months ago* (last edited 3 months ago) by MetaCubed@lemmy.world to c/thinkpad@lemmy.ml

I'm pretty new to using linux as a desktop solution (I use it for servers but have been working on switching over for desktop). I recently installed NixOS on my P14S Gen 2 and have found that while my backlight works inside the OS, I have no backlight in UEFI and GRUB.

I did complete a microsolder repair on the eDP connector on the motherboard due to liquid damage, however all SMDs and downstream chips have been thoroughly verified, and as detailed below, issues doesn't persist in windows.

Boot sequence goes as follows:

  1. System powers on (No backlight)

  2. Smartbeep diagnostics screams it's head off (No backlight)

  3. BIOS/UEFI beep (still no backlight)

  4. Diagnostic Grub beep (You guessed it, no backlight)

  5. OS splash - Backlight is now on

I am unsure if there is a way to resolve this, but any advice would be greatly appreciated as I can't seem to find anyone else with this specific presentation of a "no backlight" issue.

Troubleshooting already tried:

  • Update firmware using fwupdtool, fwupdmgr, and vantage in windows - no change

  • Reinstall windows - behavior stops

  • Dual boot windows - behavior stops if windows was the last OS booted

  • New display cable - no change (tried before realizing this is OS related)

  • Install a different distro - Ubuntu, Debian both have same behavior and I'd like to stay on NixOS if I can

  • Increase GRUB compatibility delay - no change

  • Increase UEFI boot delay - no change

  • Change graphics adapter in UEFI - no change

  • Disable quick boot, secure boot, TPM, set sleep mode to Linux, etc. - no change

  • Probably more that is at this point, forgotten

Edit: fixed formatting, added troubleshooting completed so far and more detail that was initially neglected

[-] MetaCubed@lemmy.world 28 points 5 months ago

Firefox with ublock origin and you will unironically have an near identical experience

[-] MetaCubed@lemmy.world 59 points 6 months ago

If I'm ever doubtful that someone has unplugged something, I'll ask them to describe something that may or may not be on the plug.

  • Color
  • metal type
  • "can you please read me the serial number stamped on the prongs of the power cable"
  • "what color is the plastic inside the plug" Etc.etc.

Have not had it fail yet

[-] MetaCubed@lemmy.world 24 points 8 months ago

It's possible for more than one thing to be true at the same time.

It's true that Hamas is a terrorist organization, yes.

However it's also true that the Israeli government is undertaking actions which are fitting for a genocidal, fascist government. Do you seriously thing that their 24 hour evacuation notice sent to an excess of 1 million people who had/have no power, water, heat, or communications is reasonable?

[-] MetaCubed@lemmy.world 40 points 10 months ago

It's called that because moles are a tunnelling animal... Like a VPN tunnel...

1
Elden Ring - PC (lemmy.world)
submitted 11 months ago* (last edited 11 months ago) by MetaCubed@lemmy.world to c/currentlyplaying@feddit.uk

Obviously a little late on this one, but wanted it since launch so I picked it up with all the DLC. I've gotten to NG+11 on Dark Souls 3 but haven't beaten any other fromsoft game, so I was very excited to see how I'll fare on this one.

I'm enjoying it so far, have about 20 hours on my save and beat Margit around hour 11 (27 deaths). Currently working my way up to Liurnia academy. Took me a little bit to warm up to the open world + crafting... And honestly I'm still not totally sold on it, I think I'm reaching a point of open world fatigue. I love the freedom it provides in games but I do miss more linear experiences some days.

That's all my thoughts so far. I love FromSoft games even if I've only beaten one, so I'm not surprised that I'm enjoying this.

[-] MetaCubed@lemmy.world 109 points 11 months ago* (last edited 11 months ago)

I agree with you that we should be exploring alternatives, but aircon is extremely energy efficient for how much thermal energy it moves (reaching 400% efficiency in some cases) . The problem isn't aircon itself, but what is being used to power it (coal/natural gas power plants)

In fact the technology behind aircon can be expanded into a heat pump to both heat and cool, being more efficient than electro-resistive or gas heating. There's even water heaters that will actually cool the area they're in and use the heat they gather from the space to heat the water.

Technology Connections has a great series of videos that go in depth on both heat pumps and aircon.

[-] MetaCubed@lemmy.world 50 points 1 year ago

It's a copypasta

13
Rule (lemmy.world)
submitted 1 year ago by MetaCubed@lemmy.world to c/196@lemmy.world
2
view more: next ›

MetaCubed

joined 1 year ago