[-] OZFive@lemmy.world 10 points 19 hours ago

Oh no. Indy would have been walking slowly the other way when the snake was first spotted.

[-] OZFive@lemmy.world 25 points 1 day ago

Now this is a prime example of what an AI should be used to do. Improve the lives of people in ways that will make a difference in the day to day real world.

[-] OZFive@lemmy.world 15 points 2 weeks ago

Damn. Everett needs to go meditate and look inside to find the root cause of his anger issues.

I do feel that Everett would be violently angry at another person treating someone just doing their job the way he just did himself.

[-] OZFive@lemmy.world 11 points 4 months ago

Chris Kelly passed in 2013 from drug use. Chris Smith is doing well with his own fashion brand and has recently (Nov 23) put out a solo album.

https://www.hotnewhiphop.com/747458-kris-kross-where-are-they-now

[-] OZFive@lemmy.world 10 points 6 months ago* (last edited 6 months ago)

Per KHOU on Sept 21 2018...

After the poster stayed up unnoticed for more than a month, Maravilla tweeted about the prank and it quickly went viral. McDonald’s was a good sport and applauded the students for creativity.

The restaurant recently took the poster down because the building is being remodeled. But they announced Monday it will be donated to the Ronald McDonald House for a fundraiser.

KHOU

30
submitted 6 months ago* (last edited 6 months ago) by OZFive@lemmy.world to c/3dprinting@lemmy.world

A coven (according to Google, that is the correct grouping for wizards) of 15 Harry Potter figurines ready for my daughter's 7th birthday party to be colored in by her & her friends using some paint pens.

31
submitted 6 months ago by OZFive@lemmy.world to c/3dprinting@lemmy.world

So my daughter is loving her new Ender 2 Pro and printing out Harry Potter figurines to paint. We have been using acrylic paint pens (easier at this age), they have been good, not great. We are having a Harry Potter themed b-day party for her and her friends. I am going to print out a batch of Harry, Ron, and Hermione characters for them all to paint after the play time limit at the trampoline park ends.

was wondering... What kid friendly paint works best for PLA?

84
Tie-Fighters Follow Up (files.catbox.moe)
submitted 7 months ago by OZFive@lemmy.world to c/3dprinting@lemmy.world

I am pleased to follow up to this post with an update that the Tie-Fighters now all have engines and am halfway done with the solar collectors frames.

[-] OZFive@lemmy.world 10 points 7 months ago

I can definitely understand the confusion! They are indeed collectors. https://starwars.fandom.com/wiki/Solar_collector

Unfortunately, the nerds are on their way. I messaged them a little while ago and used the link to distract you while they gathered.

HE'S OVER HERE GUYS!

72
submitted 7 months ago by OZFive@lemmy.world to c/3dprinting@lemmy.world

... for my daughter and the neighbor kids. All scaled to 200%.

printables.com/model/563813-t..

Going to throw on some fun colors for the canopies and solar collectors.

Overture Black Sovol White Overture Space Grey Overture Dual Color Silk Red/Gold

[-] OZFive@lemmy.world 11 points 8 months ago

No no no.... No. Just stop it. No.

[-] OZFive@lemmy.world 21 points 8 months ago

Why does Kermit the Frog have teeth?

15
submitted 8 months ago by OZFive@lemmy.world to c/3dprinting@lemmy.world

Good day! I am running a Klipperized Sovol SV06+ and have been getting some really great prints. I am however having an issue where lately I am having to adjust the Z offset with each new print. I did a first layer calibration and got a perfect result but after a couple prints I saw I needed to lower it to get a good first layer. Again I printed a few and then again I needed to lower it. This has happened a few times.

Yesterday I was printing a pretty large print and midway through the extruder shifted (the print remained secure to the bed) and continued printing. After I canceled the print I had to lower the Z offset much further than I thought was possible. I am concerned that the bed keeps "lowering".

I have a very good bed mesh loaded (used the silicone bed leveling mid I have seen discussed). I am just unsure why this is needing to be adjusted and why the last print went wonky (related?)

Thanks much!

[-] OZFive@lemmy.world 14 points 8 months ago

Just made some and the joke runs through my head (going to get it very wrong I am afraid)...

Host: Welcome to my party! Can I interest you in a half dozen hard boiled eggs?

Guest: uhhhhhh, no thanks?

Host: What if I cut them in half, add in some mayo and some other stuff?

Guest: (busily stuffing face) Got any more?

[-] OZFive@lemmy.world 23 points 9 months ago
[-] OZFive@lemmy.world 14 points 10 months ago

INSUFFICIENT DATA FOR MEANINGFUL ANSWER

10
Two Fan Hover Bikes (lemmy.world)

I just can't get them to be aligned the right way. Always a bit wonky and they don't fly straight. I have had to end up building three fan hover bikes with two fans on the back and one up front just to keep everything stable.

Any tips?

view more: next ›

OZFive

joined 1 year ago