WbrJr

joined 2 years ago
[–] WbrJr@lemmy.ml 2 points 4 months ago

My friends had about the same amount oft issues with their thinkpad as me with the fw.

I agree, that there are many issues, but you don't notice them in daily use.

The support is very good with most people, I seem to have bad luck, but once I got someone helpful, it got solved super quick.

I still recommend fw. I wish they would redo the fw13 and improve upon all the little issues everyone had, but mine still goes strong and I hope it will for many years to come

[–] WbrJr@lemmy.ml 1 points 4 months ago

Aber sobald die Figur weg genommen wird, stoppt doch die Wiedergabe, nicht? Dann müsste ja dauerhaft gescheckt werden ob das ding dtsuf steht. Aber vielleicht war das hier nur Zufall und die Kommunikation hat sich genau so verschoben, dass es gepasst hat

[–] WbrJr@lemmy.ml 1 points 4 months ago

I would not even say so. It tool me maybe a weekend to und erstand the concepts. I had no other selfhosting experience before. Specialy docker compose is almost plug and play

[–] WbrJr@lemmy.ml 3 points 4 months ago

WIE KANN SOWAS NOCH SEIN. also ich hab noch nicht viel entwickelt, aber wenn ich doch grade was mit Passwörtern baue, achtet man doch drauf, dass die nicht im Klartext abgespeichert werden! Das verstehe ich irgendwie wirklich nicht...

[–] WbrJr@lemmy.ml 2 points 5 months ago (1 children)

Crossposts Form reddit? I though about building a bot that posts the top 3 posts every day to the correspinding lemmy instance, just to get more posts here.

I Mike lemmy for its very technical posts but sometimes i would like some more shitposts here :D

[–] WbrJr@lemmy.ml 5 points 5 months ago (3 children)

created by deletor

[–] WbrJr@lemmy.ml 2 points 5 months ago (2 children)

Das hat funktioniert!? Ich hätte geschworen das kann nicht gehen, weil der RFID Tag lustige Sachen macht und nur mit einem gerät reden kann. Grade weil die Figuren ja gesprerrte chips verwenden die nur von der box frei geschaltet werden kann. Gibt (irgendwo hier verlinkt) einen talk dazu vom 37c3!

[–] WbrJr@lemmy.ml 10 points 5 months ago

Im not in this field, but the risk is that flatpak can be distributed by anyone? But flathub provides validated Tag for entities provoding trustworthy flatpaks, no?

[–] WbrJr@lemmy.ml 1 points 5 months ago

I recsntly set up my PC again and had fomo when selecting a distro. First ai helped to choose, just tell it what your requirements are. Second, its Linux. After the installiert you can do whatever you want with it. Just pick one if the 3 best fitting ones

[–] WbrJr@lemmy.ml 6 points 5 months ago

Ich finds es spannend, dass win großteil der Kommentare ein wenig am Punkt von OP vorbei gehen. Ich empfinde es sehr ähnlich und würde mich mal wider über stör scheißpfosten freuen. Das muss nicht direkt heißen dass ich pro CDU bin. (Ich find die super, gar keine Frage!) Wenn jemand äußert, dass die Person dieses ganze Politik Thema bedrückt ist das finde ich sehr nachvollziehbar und das kann man so stehen lassen.

Ich finde nur wir linken (mich eingeschlossen) verhalten uns manchmal ein bisschen arrogant und denken wir wären besser als die rechten, verhalten uns dann aber gleich unreflektiert und hauen drauf los. Dadurch entsteht nur mehr Hass zwischen beiden seiten. Aber auch unter uns, weil wir nicht mal was stehen lassen können.

Ich denke man muss sich fragen warum jemand rechts ist. In meiner Erfahrung spielt Erziehung und politische Prägung eine große Rolle. Genau so aber Bildung, das richtige Umfeld, Erfahrungen und Erlebnisse und vor allem der Diskurs. Menschen die rechts wählen denken ja nicht sie sind böse, trotzdem verhalten sie sich schädlich für die Gesellschaft. Es ist also einfach eine Frage der Perspektive und wir sollten versuchen uns ins gegenüber hinein zu versetzen bevor wir wieder einfach was raus tröten :D Sonst sind wir genau so antidemokratisch! Das soll rechte nicht rechtfertigen, aber solange wir nicht verstehen warum die so ticken können wir gar keine Argumente bringen, die relevant für die sind

[–] WbrJr@lemmy.ml 1 points 5 months ago

Gebe ich dir recht. Bei win und mac ist es sehr viel obskurer als linux. Da ist das halt normal das zu tun und man findet reichlich unfos dazu

[–] WbrJr@lemmy.ml 1 points 5 months ago (2 children)

Hilft aber um die komischen gelegentlichen wehwehchen von Linux zu beheben

 

Ubuntu just started renaming files while exporting (sending over mail, KDE Connect, Whatsapp web). The folder is my google drive, connected to my google drive. Sometimes it looses its file ending/type as well. The file is called something like: "1Kfhgsji2rjfIS-fi3oo598nf8ajlfoi.pdf"

I guess its a weird bug, it persist even after a restart. Thanks, maybe you have a solution

 

Hi! I hope this is the right community to ask.

Next week I will be on the road for 5 Days for work. I have quite some spare time, so I thought I would dig up my raspberry project again and hopefully finish it.

I need it with me, because it controls some hardware, so a VPN to home does not work. So only option I could think of, is to connect the pi directly to my laptop via an ethernet cable. As far as I understood from some research is that I would need to install and run an DHCP server on my laptop, which they did not recommend. Alternatively they suggested to just take a router and plug both devices in there. I don't really have a spare router, so that's not an option either.

To be hones it confuses me a little, that there does not seem to be a standard for connecting to a device directly over a single cable and login with a user account.

Any recommendations how I can work on the pi like with ssh?

Thanks a lot!

 

Hi! I started to fiddle around with freecad a little again tonight. I still find many things unintuitive. And I just watched a video about master sketches, because they are essential in my workflow on other programs. It makes it soo much easier to keep the overview and change little things quickly because I don't have to search for the responsible sketch.

In this video the person demonstrates at around 9:15 how to use the master sketch as a reference in the sub bodies. I can get used to only get one body from a sketch, but man, how many steps does it take to just reference a sketch?! You even need to use a differen workbech, use the clone tool, but not this one and then drag and drop the duplicate into the same body you are working on? Why?! I mean the sketch is right there, just let me click it!!

This got me wondering it those rough workflows are just designed badly or if this is a limitation of the engine or whstevery it's called, that freecad is based on? Because in my limited programming mind it does not make a difference what file is referenced. If it is some file on a directory above, just use something like "./" Before to go up one directory.

And I think those little things that just work in other cad software, makes freecad so much less approcavhabel and so much harder to jump in.

If I want to make a complicated part, that is not just a box with a hole, I don't want to Google around until I found a solution, I want the intuitive solution to work without 3 extra steps. This just hinders my design process a lot.

Maybe someone knows how freecad works on the background and can explain why freecad works like that.

Thanks!

 

Edit: thanks everyone for the suggestions. In the end I decided to buy a icy box usb3.1 4xhdd enclosure for around 100€. In the description it says it only works with mac and windows, but my Linux laptop works well with it, I guess the pi will to as well. I will print an enclosure for the power brick and the pi to screw to the drive case.

Here is why I choose this option: The pi is rather cheap compared to its power and also power consumption. I already had 4x4tb HDDs which I wanted to use, so at least 4 slots needed. The pi has 2x usb 3.0 connections which can be used simultaneously. One will be used for the 4bay, the other is free for now. I have the option to connect a second Nas case if I need more storage. Usb 3.0 is pretty fast, even if I don't get all the 5gbit/s. It's still faster than 1gbit/s ethernet.

I also thought about getting 2x 2xhdd enclosures to use the two usb3.0 at the same time. But decided against it because it would be a little more sketchy and I wanted to keep a free usb port for a second drive enclosure.

There are some enclosures that offer raid (hardware raid?) But I could not figure out if that would mean that all 4 drives will be raided, so I decided for the cheaper variant and would do the raid myself.

I plan on running 2 drives as raid1 and the other as raid 0 for secure storage and the other for movies and stuff I can download again.

Thanks again for all the comments!


It seems weirdly difficult to find a good solution to attach HDDs to my pi. Best case would be for me a enclosure with small power supply, space for my pi, and at least 2 bays for HDDs, rather 4. All that for under 100€ of cause :D

I could not really find cheap hhd enclosures that connect via usb. Any recommendations? I don't really want to use HDD toasters, they feel not permanent enough for a Nas. I could also not find sata to usb hats for the pi that are available right now

 

Almost all countries require official authentication to activate a SIM card. This seems to me as a huge privacy problem, if the country can track sim cards across cell towers and connect them to a person. It seems like a dystopian system, that we litterely can not hide from our governments without turning off our smartphones. It seems incredibly unnecessary to me and just sets up the system to be abused.

Or do I understand something wrong?

What can we do against this? There are some sim cards that can be bought second hand, but they will not be a long term solution.

 

Hey there! I love the idea of freecad. But I have so many troubls learning it. I started with fusion360, used solidworks for some time, used inventor a bit and use onshape mostly now. So I think I know how to navigate and learn new cad software. But its not as easy with freecad sadly.

I Would love this product to be more accessable and easier to use and undertand. What can we do besides jumping in on developing ourselves?

Switching form fusion or onshape to freecad feels like switching from python to assamlby.

So how can we help to improve freecad and make it a more usable program? It seems as if the devs try to reinvent everything and every menue compared to all other cad programs i have used. I am totaly fine with some issues or bugs, but i feel like its not up for success currently.

Thanks a lot, I hope you have some ideas

 

Hey there! I just reinstalled fedora and noticed my fn keys 7 to 12 do not work. The rest do their jobs, but i cant change brightness and airplane mode anymore.

I could not find any usefull help online, so i hope you have some hints. :)

Thanks a lot!

 

Hi there!

I need some help with my framework laptop and fedora. I want to switch to linux more permanently, but fedora does not enter hibernation properly when closing the lid. I dont care 10-20sec of wakeup time when opening it again. (even windows is more efficient?!) The relatively bad performance on battery life is OK for me, I already installed TLP instead of the default power management. But when closing the lid, the battery drains about 80% over night (10h?) which seems to be more than what other people reported.

I could not find a guide on this, which i understood (still a massive noob to afraid to mess up my carefully crafted linux partition :D).

If you have any advice I appreciate it! Thanks a lot! :)

view more: ‹ prev next ›