165
Is there a linux distro (or just a DE) that can be used like a Smart TV (programming.dev)
submitted 1 month ago by BumbleBear@programming.dev to c/linux@lemmy.ml
53 comments fedilink hide all child comments

I don't want to use Osmc or LibreELEC. What I'm going for is something like Android TV (tried using LineageOS but that didn't work out for me).

I was interested in something like Plasma Bigscreen but most of the tutorial is about 4 years old and point to using an old image.

I installed the Debian package. After that, I logged in and set Automatic login, and switch the session to Plasma Bigscreen (x11). After applying and a reboot, it launched Plasma Bigscreen but some widgets (like the audio, KDE Connect) froze when clicking on them.

What do you recommend? I prefer to use a Raspberry Pi.

top 50 comments
sorted by: hot top controversial new old
[-] chronicledmonocle@lemmy.world 93 points 1 month ago* (last edited 1 month ago)

I run an HTPC that works fully with my AirMouse Remote I bought for it for ~$15USD. It uses Flex Launcher running on Debian.

Basically, I use it for Plex, some Netflix, retrogaming, and Steam.

I was in a similar boat to you were I looked at Plasma Big Screen, LibreElec, etc. Plasma BigScreen was too buggy or unmaintained. LibreElec is great if you want to play local stuff, but terrible for streaming things like Netflix. In the end I said "screw it. I'll make my own". Now it's the center of my living room.

[-] BumbleBear@programming.dev 20 points 1 month ago

That looks amazing! Are the icons you have there, for example, Netflix, is that a desktop shortcut to open up the browser and load the website?

Your use case is very similar to mine. Thank you for sharing.

[-] chronicledmonocle@lemmy.world 10 points 1 month ago

It loads the web page in full screen kiosk mode in Chrome.

[-] AndrewZabar@lemmy.world 2 points 1 month ago

You could also always nativefier it and make it like a webapp. I have some sites setup like that on my machine.

[-] chronicledmonocle@lemmy.world 2 points 1 month ago

Does that offer any advantages over the kiosk mode functionality? Looks like that repo was abandoned in 2023 and marked as archived.

[-] AndrewZabar@lemmy.world 2 points 1 month ago

What repo? Use npm to get nativefier, the one from regular apt etc. are not current, they’re copies of older versions. Dunno why someone did that.

[-] chronicledmonocle@lemmy.world 2 points 1 month ago

The GitHub repo of the maintainer shows that the project is archived and dead.

[-] AndrewZabar@lemmy.world 2 points 1 month ago

Again of what? Of nativefier?

[-] chronicledmonocle@lemmy.world 2 points 1 month ago

Yes

[-] AndrewZabar@lemmy.world 1 points 1 month ago

Well it does what it’s supposed to do, so who cares.

[-] bjornsno@lemm.ee 1 points 1 month ago

If you look at the repo, the very first line in the readme links to an issue that briefly explains why you should care.

Unmaintained software comes in two categories:

  1. The software is done. It does exactly what it was meant to do and it was written in a language and in such a way as to be pretty future proof. Examples are some basic code libraries or command line utilities.
  2. The software had to be updated all the time to keep up with changing environments and security problems, so the dev got sick of it and dropped it. Or a better solution came along so the developer felt free to finally drop the burden.

Nativefier falls in the second category and the second clause. Don't use it.

[-] AndrewZabar@lemmy.world 1 points 4 weeks ago

Ok so, it doesn’t seem to me to be the case. But if you’re indicating a better solution came along, what would that be? I’m fine with nativefier for the two items I made with it. But if there’s something better then please do tell.

[-] bjornsno@lemm.ee 1 points 4 weeks ago

Again The issue on the repo. The developers recommend just using the app feature of the browsers to get similar functionality without the security concerns.

load more comments (1 replies)
[-] ada@lemmy.blahaj.zone 12 points 1 month ago

Oh, Flex Launcher looks perfect! I didn't even know I needed it!

[-] yo_scottie_oh@lemmy.ml 7 points 1 month ago

Do you get high def Netflix? I’ve read in multiple places that Netflix limits streams to 720p in web browsers, which has always stopped me from straying from my chromecast. Not sure if that’s what I’m seeing in your photo, though. (basically I have the same question as OP)

[-] chronicledmonocle@lemmy.world 4 points 1 month ago

As long as your browser supports the DRM, it should stream 1080p and 4k fine. Chrome is best, unfortunately, specifically for Netflix.

[-] Chewy7324@discuss.tchncs.de 3 points 1 month ago

No DRM for desktop Linux supports 4k Netflix. IIRC Netflix doesn't even support 4k on Windows for anything except Edge, at least that was the case for many years.

[-] chronicledmonocle@lemmy.world 4 points 1 month ago

Really? I thought Chrome added support on Linux for 4k.

I rarely stream Netflix and it's only on there for my wife. If I want a show, I add it to my Plex library. Even if Netflix has it.

[-] Chewy7324@discuss.tchncs.de 3 points 1 month ago* (last edited 1 month ago)

According to Netflix documentation, they only support 720p on Linux, regardless of the browser.

Chrome officially supports 1080p on Windows and macOS, while 4k is only available through Edge on Windows and Safari on macOS.

In the past I've used a Firefox plugin to enable 1080p playback on Linux, but the bitrate was lower than the 1080p bitrate on Windows (with Edge, iirc).

https://help.netflix.com/de/node/30081

Edit: Luckily Jellyfin does not have such annoying restrictions.

[-] chronicledmonocle@lemmy.world 3 points 1 month ago

I think the Windows Store app for Netflix supports 4k, but that would require running Windows.....and that's just icky.

[-] exu@feditown.com 5 points 1 month ago

This looks awesome. I currently don't need a TV interface, but when I do I'll definitely try this out over Kodi.

[-] bigmclargehuge@lemmy.world 2 points 1 month ago

Same boat here. RaspberryPi running LibreElec, which is okay but can be unstable and lacks power. Been looking at an AMD 4x4 pc to boost performance and run some form of full Linux distro.

[-] helenslunch@feddit.nl 1 points 1 month ago

What air mouse did you get? How does the keyboard work?

[-] chronicledmonocle@lemmy.world 4 points 1 month ago

It's a brand called Gimbi. It has a keyboard on the back and programmable IR buttons.

load more comments (1 replies)
[-] glasgitarrewelt@feddit.de 1 points 1 month ago

May I ask: did you write the config on your own and did you create the neccessary icons? Or is there a sample config somewhere, with some icons as well (jellyfin, youtube etc would be nice).

[-] chronicledmonocle@lemmy.world 2 points 1 month ago* (last edited 1 month ago)

There is a default config it comes with. I just modified it. Their documentation is really good. If you'd like a copy of my config, LMK.

Icons I found online and then trimmed to the correct size and transparency.

load more comments (2 replies)
[-] 01189998819991197253@infosec.pub 1 points 1 month ago

Flex Launcher looks awesome! Thanks!

[-] ChillPill@lemmy.world 20 points 1 month ago

KDE bigscreen looks perfect for me. I know I have heard of it before but I will need to look a bit more in depth at it.

All I want is Roku, but FOSS, without the ads and tracking.

[-] Cyber@feddit.uk 18 points 1 month ago

Checkout big-launcher:

big-launcher is a work-in-progress HTPC application launcher. The design is loosely based on the Roku UI, consisting of a sidebar menu on the left, and selectable apps on the right. This project is intended to be the successor to my other HTPC project, Flex Launcher. Compared to Flex Launcher, big-launcher will be more graphically advanced, but less customizable. The program will be written in C++ and utilize SDL for graphics.

I just read about it from the Flex Launcher page, so no idea what it's like, just passing it on...

[-] 01189998819991197253@infosec.pub 2 points 1 month ago

That looks great! Thanks!

[-] SidewaysHighways@lemmy.world 12 points 1 month ago

I have been on this hunt myself and am coming up short. Especially on the hardware at my disposal.

So far I've tried all the same stuff you've mentioned but am settling in to LibreELEC well enough with addons, including the emby next gen setup (got into emby before finding out about jellyfin)

what don't you dig about LibreELEC?

Plasma bigscreen sounds like it would be the best, but I never got it to work right ( granted I was very new to Linux back then)

Have you tried blissOS?

[-] BumbleBear@programming.dev 8 points 1 month ago

I tried Kodi in the past but switched over to Emby. Not 100% sure if there is an Emby plugin but the wife and kids are use to the Emby interface.

Plasma Bigscreen looks very cool but spent time trying to figure out why some of the widgets on the main screen loads up then freeze. Like the Mycroft widget, for example.

Also trying to figure out why apps like Kate appears twice under Applications.

I have not tried Bliss OS. Looks very interesting so I will take a look. Thank you for that one.

[-] JustTesting@lemmy.hogru.ch 6 points 1 month ago

Have you tried Jellyfin? It's a FOSS fork of emby, so pretty much a drop in replacement and it's been working very well for me.

Personally I use jellyfin as a backend, with the web interface and jellyfin app as frontend. Plus Kodi as an additional frontend for my beamer, with the Kodi Jellyfin plugin and Yatse remote to make it feel more like a TV.

load more comments (1 replies)
[-] SidewaysHighways@lemmy.world 3 points 1 month ago

We've so much in common! I had a skin working that made Kodi look just like an emby app or webpage

There is an emby addon that uses your server to keep track of profiles and stuff. It's actually pretty sweet to get it set up.

[-] jcarax@beehaw.org 12 points 1 month ago

What's your use case that OSMC and LibreELEC don't work? I think those are going to be common recommendations, so knowing why they don't suit you would be helpful.

[-] BumbleBear@programming.dev 4 points 1 month ago

I used Kodi in the past as a standalone app but then switched over to Emby. I have Emby set to play my media and also setup to play stations on my custom IPTV server. Installing the Emby client on my mobile or or using the browser will have access to that media since I set that up on the Emby server. Wife and the kids are use to the interface too. Have to keep them happy.

Also I would like to install some Linux compatible games on it.

[-] dharmacurious@slrpnk.net 9 points 1 month ago

I do not have an answer for you, but I'd also really like to know. Not super techy but willing to learn to do this!

[-] neomachino@lemmy.world 2 points 1 month ago

Commenting to check back later.

I also do not have an answer but want to know.

I have used Flex launcher on a mini PC, it seemed like a good option but I got busy before I could even half set it up.

[-] werefreeatlast@lemmy.world 8 points 1 month ago

The rpi is severely underpowered for such a thing. 8 suggest going with a cheap anything else computer.

[-] friend_of_satan@lemmy.world 8 points 1 month ago* (last edited 1 month ago)

Plex used to have a distro that booted straight to Plex and that was it. You could control it using your tv remote if your tv supported HDMI-CEC. I'm not sure if it still exists. I guess it wouldn't be any better than openelec though. 🤷‍♂️

Could you be more objective about what you want and don't want feature wise? I don't know about other folks but I've never used android tv so I don't know what you mean when you say that's similar to what you want.

Edit: I'm pretty sure the Plex software I was talking about was based on this archived repo, so it likely isn't a modern option https://github.com/plexinc/plex-media-player

[-] ltxrtquq@lemmy.ml 4 points 1 month ago

I don't know about a distro, but it looks like they are still maintaining an HTPC app for windows, mac and linux. The linux one looks like it was last updated about 2 weeks ago

[-] electricprism@lemmy.ml 7 points 1 month ago

Also recommendations for a good remote to go with these?

I was so desperate I was thinking of reprogramming a wireless number pad cherry MX low profile or something.

It should have volume buttons, arrow keys, previous, next, pause, etc... Something a old person could understand.

Numbers and alphabet not required.

[-] AProfessional@lemmy.world 7 points 1 month ago

Bit old, but I used a Windows Media Center remote, still see new ones for cheap. Then use lirc with an IR receiver.

[-] TheBest@midwest.social 3 points 1 month ago

Pepper Jobs Media Remote. Changed my living room media center for good.

[-] kurumin@linux.community 3 points 1 month ago

Batocera

[-] glasgitarrewelt@feddit.de 2 points 1 month ago

Whoopdidu. What are we playing?

[-] downhomechunk@midwest.social 2 points 1 month ago

NBA jam, tag mode on.

[-] geoma@lemmy.ml 3 points 1 month ago

Kodi?

load more comments
view more: next ›
this post was submitted on 10 Jul 2024
165 points (98.2% liked)

Linux

46620 readers
896 users here now

From Wikipedia, the free encyclopedia

Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).

Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.

Rules

Related Communities

Community icon by Alpár-Etele Méder, licensed under CC BY 3.0

founded 5 years ago
MODERATORS
AgreeableLandscape@lemmy.ml
nooter692@lemmy.ml
MarcellusDrum@lemmy.ml
cypherpunks@lemmy.ml
cyclohexane@lemmy.ml
d3Xt3r@lemmy.nz