516
top 50 comments
sorted by: hot top controversial new old
[-] alvvayson@lemmy.world 202 points 11 months ago

A megagram is 1000 kg, by definition. It's symbol is Mg.

In metric countries, we just use the word "ton" as shorthand/slang for it, since it is an easier term and was well known.

The only reason the US calls it a metric ton, is because they have archaic units (long and short tons).

Metric countries don't call it a metric ton.

[-] DharmaCurious@startrek.website 60 points 11 months ago

No one in the US knows WTF a long and short ton are. A ton is 2k lbs. And most Americans probably don't even know the exact weight of a ton outside of "a shit load."

For the most part, we generally only use pounds, feet, miles. Everything else is a mystery. Even ounces, cups and gallons are some fucking magical mystery. Just follow the recipe.

I switched everything to metric years ago, and have never been happier. It made a huge difference in most of the things I do, having a system that makes internal sense. The only thing I still routinely use standard for is sewing, because it's damn near impossible to find any patterns or things like cutting mats in metric in the right sizes for quilting.

[-] yA3xAKQMbq@lemm.ee 47 points 11 months ago

There recently was a discussion on lemmy where several US citizens (one of them allegedly an engineer…) tried to explain to me that metric might be „more precise“ (? 😂) but the imperial system more practical, because „everybody knows what a foot is“. When I asked them to add feet to miles I got shouted at (in CAPS) that noone (ever) does that. 🤷‍♀️

[-] CIA_chatbot@lemmy.world 36 points 11 months ago* (last edited 11 months ago)

Lol, that sounds very much “as a black man”

I’ll tell you, most of us in the states would love a total switch to metric. We use it where is matters most, but we also have an aging population raised on lead has fumes that think anything they don’t know is “communism” or “wholeness” or whatever else the propaganda right spews. Those are the assholes that pretty much stop progress on anything.

I’m big into 3D printing, actually got into the same argument with another 3D printing guy…. And I’m like, literally EVERYTHING we do is in metric. The whole damn hobby is metric.

I hate humanity

[-] yA3xAKQMbq@lemm.ee 10 points 11 months ago

Lol, that sounds very much “as a black man”

You mean the „engineer“? Well, what can I say, he was insisting his professor at uni taught him „a true engineer can work with every system“.

I mean yes, but the difference is one engineer is just happily pushing around decimals, the other one goes pale when you ask what 1/5th of a gallon in cubic inches is…

[-] CIA_chatbot@lemmy.world 8 points 11 months ago

Hehe, yea, I was poking fun at the “engineer”. There was a congressman a while ago that got caught posting right wing stuff on twitter from an alt account “as a black man” (dude was white of course”

load more comments (11 replies)
load more comments (38 replies)
[-] ALERT@sh.itjust.works 11 points 11 months ago

lbs = elbows? 2 thousand human elbows?!

[-] DharmaCurious@startrek.website 17 points 11 months ago

Yes. Jesus, why can't Europeans educate themselves on real measurements! We measure in feet and bald eagles for distance. We measure in shotgun shells, elbows and pounds for weight. We measure in ATNT for temperature. That's Ambient Truck Nut Temperature, which is the temperature of a pair of truck nuts after driving for 80 bald eagles at 40 bald eagles per Active Shooter Warning, at sea level on a Wednesday. It's not complicated.

load more comments (1 replies)
[-] ArbiterXero@lemmy.world 16 points 11 months ago

Canada does, because we’re mostly metric but still do enough business with the US that we’re sorta half and half

[-] cbarrick@lemmy.world 9 points 11 months ago

Yeah, but what about the metric shit-ton?

load more comments (2 replies)
load more comments (8 replies)
[-] aulin@lemmy.world 70 points 11 months ago

There's nothing wrong with doing so. Perfectly up to you, and everyone would know how much it is.

[-] deekhenbawls@lemmy.world 52 points 11 months ago

I sometimes use millitonne (mt) instead of kilogram to keep people on their toes. I've learned that some people doesn't like to have their weight measured in any kind of tonne.

load more comments (18 replies)
[-] MystikIncarnate@lemmy.ca 31 points 11 months ago

I noticed this with vehicles. Odo has 100,000 km on it? Nah, it's 100 megameters. It just sounds cooler

load more comments (2 replies)
[-] Eheran@lemmy.world 25 points 11 months ago

Units closer related to everyday stuff are those that stick around. Like horse power or km. People don't use Mm but instead 1'000s of km, even into the million km for cars. Even in space they still tend to use km like for the distance to the moon or sun. Only once the distances get absurdly large is there a shift to either another unit (light years) or the use of different notation (like 3.14E12 m).

[-] aulin@lemmy.world 14 points 11 months ago* (last edited 11 months ago)

As a Swede, using units that give numbers above ~100 starts to get unwieldy. Hence why we use mil (1 Scandinavian mile = 10 km) once we get to triple digits in km. "It's 60 mil to Stockholm" is immensely more natural than "it's 600 km to Stockholm".

load more comments (2 replies)
[-] too_high_for_this@sh.itjust.works 9 points 11 months ago

The astronomical unit AU is commonly used for things in the solar system. 1 AU is roughly the average distance to the sun, about 150 000 000 km

load more comments (10 replies)
[-] eldain@feddit.nl 22 points 11 months ago

Earth's circumference is 40 Mm. 1 AU is 14 Gm. I could get used to this.

[-] PowerSeries@lemmy.ca 16 points 11 months ago

The moon is 400Mm away. Never say thousand kilometers again, the mega is the way.

Imaging if we started saying millions of kilobytes instead of GB.

load more comments (1 replies)
[-] grte@lemmy.ca 22 points 11 months ago* (last edited 11 months ago)

Megagram is the official SI term for the weight. Metric tonne is non-SI but happens to be equivalent to a megagram and became the more common parlance (where I am, at least) by historical accident.

load more comments (3 replies)
[-] lemmie689 20 points 11 months ago

I like metric wrenches, if my 5mm doesnt fit I can try the 6mm. Most nuts and bolds are not metric, so I end up figuring what comes next if my 1/2" doesn't fit. is it like 33/64th? 34/64th? 17/32nd?

[-] YeetPics@mander.xyz 18 points 11 months ago

One magnesium please. yes I'm sure, only one.

load more comments (6 replies)
[-] FlyingSquid@lemmy.world 16 points 11 months ago

What is this metric shit? I'm an American! I measure weight in American units like the hundredweight and the truss and the slug!

load more comments (8 replies)
[-] over_clox@lemmy.world 13 points 11 months ago
load more comments (3 replies)
[-] randy@lemmy.ca 10 points 11 months ago

I'm an engineer, and I make it a point to teach young engineers that "a ton" can mean any one of three things:

  • Short ton = 2000 lb
  • Long ton = 2240 lb
  • Metric ton = 1000 kg = ~2204 lb

And which is being used is often not spelled out, but is just known from context, and usually should be clarified. I once nearly got in trouble by thinking a measurement was in short tons when it was actually metric tons.

So my own act of rebellion is to use "Mg" when I'm writing my personal notes.

[-] Treczoks@lemm.ee 9 points 11 months ago

There is metric ton and this imperial shit. And thanks to metric being highly systematic, "Mg" (megagrams) is actually correct - "ton" is just a shorthand.

[-] Kolanaki@yiffit.net 10 points 11 months ago

But then what would a metric fuckton be?

[-] captain_aggravated@sh.itjust.works 9 points 11 months ago

2.2 shitloads.

[-] Scrollone@feddit.it 9 points 11 months ago

In Italian schools they teach it as Megagram, since ton is an old term which is non compliant with the SI

[-] WestHej@lemmy.world 9 points 11 months ago

After reading the comments, I've noticed a point that is missing from the other comments. We like to measure things relative to other things. Therefore we should use a unit of measure which you can compare the entire range of expected values for that question simply.

For example how far away is my nearest town centre? 1km. How far away is the nearest city? 10km. How far is it across the country? 500km, How far is it across the continent? 5,000km. How far is it around the equator? 40,000km.

By using all km in this case it's easy to get an idea of the relative distances. But you wouldn't measure your height as 0.0018km. Just my own thoughts!

[-] Lt_Cdr_Data@discuss.tchncs.de 9 points 11 months ago

That's what unit prefixes are for... you can measure your height in cm

load more comments (1 replies)
load more comments (2 replies)
[-] fernfrost@lemmy.world 7 points 11 months ago

I prefer Gigamilligram

[-] tunetardis@lemmy.ca 7 points 11 months ago

I've often wondered why the kilogram was not called the gram when the former is commonly cited as the official unit of mass? I guess it doesn't really matter much since it's easy to convert between units. That's sort of the point of metric, but still…

[-] Astrealix@lemmy.world 9 points 11 months ago* (last edited 11 months ago)

Cuz the gram came before the SI system and the kilogram is a much more useable unit. The original m-g-s are based on physical things, like m being a subdivision of the length from the North Pole to the Equator going through Paris, and s being related to the time of a pendulum with certain length swinging or smth

A gram is the weight of 1 mL of water, roughly.

load more comments (5 replies)
load more comments (9 replies)
load more comments
view more: next ›
this post was submitted on 26 Aug 2023
516 points (94.9% liked)

Showerthoughts

28844 readers
1104 users here now

A "Showerthought" is a simple term used to describe the thoughts that pop into your head while you're doing everyday things like taking a shower, driving, or just daydreaming. The best ones are thoughts that many people can relate to and they find something funny or interesting in regular stuff.

Rules

founded 1 year ago
MODERATORS