31
sandblaster?
(lemmy.world)
At my work we occasionally use a vibratory tumbler for that
Sanding with loosenmedia :)
I suspect airblasting is going to be too aggressive for plastic (or perhaps more accurately too uneven,). But a vibe tank is usually just right.
Another that can can be made with printed parts and a motor is a rock tumbler. Slower, sure, but it has the advantage of easy printing.
Personally, I usually just sand things with a sponge block or scraps of sand paper.
Have you made a printed rock tumbler? I am somewhat considering making one for my kids, but don't know how long the container would last.
I’ve… not. I just remember playing with one as a kid. It was literally just a motor with a gear train to make it go slowish and a plastic jar.
Edit: wow. Rock tumblers have gotten expensive…this is now gonna have to be a back-burner project, me thinks.
Have they? I feel like I see more low cost options than years ago.
Might be worth trying a plastidip or some sort of urethane or rubberized coating on the inside. And the a big rubberband tire on the rollers That would make it last longer and be repairable.
Straight from the printer as often as possible.
I'm not above taking knives, chisels, drills, and saws to prints as necessary, but this is usually reserved for functional/not often seen prints.
If I am looking to improve surface finish there really isn't a substitute for sanding. I deal with the fuzzies with my hot air solder station. Just wave some hot air over the sanded surface and you'll get quite a bit of shine back.
Now that I've (nearly) finished building a Voron I am somewhat tempted to give vapor smoothing a try.
What do you think of an acetone vapor bath?
I've never done it, but I also wasn't printing with a material that even supported it until I started building my Voron. Now that I'm nearly done I am wrestling some with going back to PETG (somewhat more likely to be recycled if you put it in your recycling), PLA (could maybe be composted if it doesn't get sorted out/will eventually break down in. A landfill), or ABS/ASA (no hopes or dreams here, but man my Voron does seem to print it well).
I have 6 kg of ASA for some functional prints. I'm sure I'll vapor smooth some of it. Printing hassles of ABS/ASA aside, vapor smoothing seems like it offers amazing surface finishes. I really don't know why you don't see more of it? If you don't need dimensional accuracy it should be a big time saver.
Hot air station is a great idea damn. Do you ever have to deal with going too far? I'd be scared 😲
Practice on a failed print to get the hang of things first!
I haven't run into any issues, but I tend to print 3-4 walls so maybe that helps. My hot air station has adjustable temperature control and I keep the temps down - usually around printing temperature. I also don't stay in any one spot too long. You can see the surface finish change sheen as you move on and off a spot and its temperature changes.
I can't take credit for the idea. I either read it in a printing community or it was a natural outgrowth of people saying, "use a lighter" and me not owning a lighter.
Prints can be scraped using microplane cards (can be made yourself from spring steel with a hammer). I really like this method as it leaves a smooth surface.
Explanation: https://m.youtube.com/watch?v=a4e9JJkinvk
Here is an alternative Piped link(s): https://piped.video/watch?v=a4e9JJkinvk
Piped is a privacy-respecting open-source alternative frontend to YouTube.
I'm open-source, check me out at GitHub.
Yes, we have a small sandblaster at work for cleaning up SLS Nylon prints.
A torch
this post was submitted on 02 Sep 2023
31 points (100.0% liked)
3DPrinting
15402 readers
81 users here now
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
founded 1 year ago
MODERATORS