3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
Hey guys,
I am using Bambu lab sunflower yellow. I have dried it, and washed my plate. With this particular filament the first layer looks like shit, but the rest of the print turns out fine. Other filaments have proper thick lines of equal height and so on.
I only have a problem with this particular color sinw opening the filament. Is it just the filament being shit or you can think of anything else I could check?
Looks like the nozzle is too close (z-offset is wrong) or too much filament is extruded (flow rate is too high).
I would guess the z-offset should be fine because for any other filament it works correctly.
I will try to print a test for determining the flow rate for this specific filament after my print is done. I am using the default Bambu settings at the moment, and didn't have any issue on other filaments so far, but I guess it's worth checking out.
Then it might be flow or inconsistent extrusion. Try doing calibration available in Orca (probably same thing in Bambu slicer).
@Trail A1 series? If you remove the nozzle there is a graphite (?) plate that has screws on the backside that can come loose and cause issues with bed probing. You need to remove the plate to get at them.
I’m sure Bambu has instructions for this but I don’t know what terminology they use.
But another possible cause is that the nozzle isn’t actually seated correctly. It is possible to install them so that the latch closes but the nozzle can still move around.
Yes A1 mini. I'll try this. Come to think of it, once or twice I had a warning that the nozzle could have filemant stuck or the build blade being crooked (neither seemed to be the case) but it could potentially be related if the bed probing is not working correctly.
Not sure if such a thing would manifest only on this particular filament die to some tolerance or whatever, but won't hurt to try anyway.
I've been out of using 3d printers for about 2 years due to building a house, so I've forgotten all the terminologies used. Anyways when I had this issue on my ender 3 it was because I was using too much filament and the edges of each line was merging in to the next then pushing upwards slightly.
I had to really tinker with my first layer. What I had to do was make the initial layer a bit taller but also use slightly less filament. Sorry I can't go more in-depth with the terminologies.
It worked though, I even got great first layers when using petg and wood based filament.
Any chance the filament is unevenly extruded from the manufacturer? Try measure the spool in few places with some calipers to verify that the filament thickness is exactly 1.75mm, and that it doesn't vary.
Also, might be worth it to check your flow rate/extrusion multiplier setting to ensure that the amount of plastic extruded matches what it is trying to do.
I have read that the Bambu filaments do not guarantee with same thickness very well compared to other manufacturers (0.03mm instead of 0.02mm tolerance) and this could play a factor with small nozzles. I had in mind to try other manufacturers, but they are not so easily available for similar price in my area, so I have postponed it until I finish my current project, but I am keeping it in mind.
I should probably buy some calipers and actually measure it.
It looks to me like the nozzle is too close to the bed. This seems to be a common issue with a couple of possible causes. Have you checked if the four screws that hold the hotend to the linear rail are screwed in correctly?