This will end in a blood bath.
this post was submitted on 29 Mar 2026
627 points (98.2% liked)
cats
27882 readers
1239 users here now
Typical internet cats. Videos, pics, memes, and discussion welcome!
Rule 1) Be kind
Rule 2) Follow the lemmy.world rules
other cat communities
birds, some cats
founded 2 years ago
MODERATORS
all 39 comments
sorted by:
hot
top
controversial
new
old
I have a car who used to jump onto the sides of the tub while I bathe... until the time she fell in.
Thankfully she was stunned by her misstep on top of being a very calm cat, so I didn't end up with a flurry of claws stuck in me.
Your car should not be running around in your house. In fact your car should stand still in the garage.
A very brave kitty and a very foolish owner
Very foolish kitty and a very brave owner
I'm calling this picture out as ai. The water is higher than the bottom of the tub overflow.
The water is at the overflow line. It's in the middle of the circle. I doubt AI would include the blurry reflection in the silver as well
Edit: the photo is from 2016. I'm sick of people calling everything AI on Lemmy and getting immediately upvoted despite being completely wrong
Please remove the metal piece from your tub to examine it and the hole behind it. The metal part has a relief area at the bottom for water to flow into. Behind it is a hole that takes up about two third the diameter of the metal piece. Water will flow in not long after it reaches the bottom of the metal.
Dude, this is a static picture lol.
You know how this happens naturally? People fill the tub to just below the the overflow, shut the water off, get in the tub, and then immediately displace the water up over the overflow. Then it drains...slowly...until it's below the line.
If this was an image we could hear, I'd bet you any amount of money there was a gurgling sound in the background as the water slowly made it's way down the drain.
The trick is to get in the tub before it's done filling, then you don't waste 10+ gallons of hot water down the overflow.
My husband does this, and the way the water slowly gurgles through the overflow is just. So. Annoying.
We must rise up, those of us that get in before its full and turn it off before it hits the overflow!
Yeah my wife does the same thing and it similarly drives me batshit lol.
Its even funnier when she's standing there naked waiting for it to fill complaining about freezing while there is 20 gallons of hot steaming water sitting right there in front of her that, for some reason, she feels she can not sit in until its up around her neck lmao
Mine can be rotated, so the holes could be at the bottom, but they can also be at the top. I keep mine at the top. Water will slowly drain once it's about at the level of the metal, but it's pretty slow unless the holes are facing down.
We're arguing about 2/3 vs 1/2? The original commenter was stating it's AI because it's above the relief area, and I was stating it wasn't above the relief
Edit: here's my water relief valve. Looks pretty fucking close to halfway to me
2nd edit: omg you ARE the original commenter. Why are you continuing to argue despite me calling you out homie?
area
You are very passionate about Internet comments. Using your pictures as a reference, water would have clearly been flowing into the overflow.
Thanks! I'm passionate about authentic communication. Also, you're wrong, and acting like a dick. Take care!
Welcome to the Internet.
You're a fool if you think you're the first troll I've encountered. Be better, bozo
I'm good, but thanks anyway
When told to be better, you declined. I hope you think about that. We could all be better, and that would make the world a better place. But you had the opportunity literally presented in front of you, and you said no.
Well mine in particular had that hole blocked because I live dangerously in the comfort of a deep bath!
AI would never generate an arbitrary detail like that curtain awkwardly folding at the right or the offensively plain singular bottle at the top left.
And this picture is older than AI.
wonder why the tub overflow isn't working
edit: oh good this is already being discussed in great detail
All these other people are completely right, but also I just took mine off and flipped it so that the holes were on top it gave me a solid two inches more water space. It was just two phillips screws.
Water does not instantly drop to the level of the overflow.
Well we can assume some time has elapsed since the faucet isn't running, the water is still, and the cat is standing on the valves.
~~I don't have a tub overflow in my apartment. If I fuck up its going on the floor~~
Edit looks like its hidden in the drain control plate like that one. Thats at overflow level not past it.
I put my overflow on upside down to fill it higher.
I do one better. I put a rubber flange in with only a smallish hole at the top for maximum fillage. I wanna drown in that tub.
Where the leg at
There seems to be too many toes as well. Of course it could be taken in Norfolk.
There are clearly 5 toes
What you can’t see is that they’re completely submerged, breathing through their gills, holding the phone above the water. Probably pretending they’re in the broads.
✨They're in their aquatic element – they're not just surviving, they're thriving. ✨