1622
top 50 comments
sorted by: hot top controversial new old
[-] woelkchen@lemmy.world 380 points 6 months ago

Shoutout to screenshot tools

[-] NABDad@lemmy.world 275 points 6 months ago

Way back in the olde tymes, I was having trouble with the NIC driver in my Linux install. I posted a question about it on USENET, and got a reply from the guy who wrote the drivers. He asked for some info about the card, then updated the driver to support it.

[-] 0x4E4F@lemmy.dbzer0.com 136 points 6 months ago

Damn... now that's a wholesome moment 🥹.

[-] XTL@sopuli.xyz 49 points 6 months ago* (last edited 6 months ago)

There used to be a lot of cards based on same or similar chips, but with small differences. That made little changes to drivers common. It's a bit like LCD modules or audio chipset quirks. One driver with tons of little differences depending on what each manufacturer decided to do differently.

[-] 0x4E4F@lemmy.dbzer0.com 16 points 6 months ago* (last edited 6 months ago)

Yeah, I know, that's why the kernel with the drivers is not more than 150MB. Otherwise, you'd have the Windows situation where driverpacks compressed with 7z (LZMA2, solid archive, 273 word dictionary size and 2GB decompression memory, which requires about 128GB of RAM to compress) take about 30GB.

You have to pack the driver from each manufacturer because of signatures, even though they might even be the same with other drivers in the pack... but, REV differs and oh well, the driver installer doesn't recognize that driver as a valid one for that device.

load more comments (2 replies)
load more comments (1 replies)
load more comments (1 replies)
[-] Yeller_king@reddthat.com 193 points 6 months ago

For all we know, he does wear a cape.

[-] Caesium@lemmy.world 108 points 6 months ago

I wish capes were socially acceptable to wear again

[-] DmMacniel@feddit.de 102 points 6 months ago

And get stuck in turbines and shit?

[-] cynar@lemmy.world 51 points 6 months ago

Break away fasteners are a thing now. Line it with some Kevlar fibre and some good thermal insulation/fire resistance and you have an amazing utility device.

In public, it billows behind you, making you look dashing and heroic. When the shit hits the fan, instant bullet resistant cover for civilians. A way to shield them from the heat of a fire, or a small explosion. You could even use it offensively to tangle or deceive an opponent!

[-] Liz@midwest.social 36 points 6 months ago

There is absolutely no way in hell a bullet-proof cape is billowing in the wind.

[-] cynar@lemmy.world 12 points 6 months ago

It won't stop a direct shot, but it would help against ricochet and shrapnel.

Back during the Napoleonic wars, silk underlayers were highly sought after. They could limit the damage a musket ball could do.

A spider silk based cape could definitely help projectile damage, while still being able to billow. The challenge would be making it fire and heat proof as well.

load more comments (1 replies)
load more comments (7 replies)
[-] Caesium@lemmy.world 24 points 6 months ago

lucky for me I don't often interact with things like that

[-] snooggums@kbin.social 12 points 6 months ago

How about revolving doors?

load more comments (2 replies)
load more comments (1 replies)
[-] cynar@lemmy.world 24 points 6 months ago

I'd settle for a cloak. A nice leather, or heavy woollen cloak would be amazing for being outside on cold evenings.

Unfortunately, they are still seen as dark and 'edgy'. Moreso even than a trenchcoat. ☹️

[-] model_tar_gz@lemmy.world 10 points 6 months ago* (last edited 6 months ago)

Stop giving so many fucks about what other people think about your fashion. You do you, fam.

load more comments (1 replies)
load more comments (3 replies)
[-] CheesyFox@lemmy.world 16 points 6 months ago

just wear them already

[-] snooggums@kbin.social 12 points 6 months ago

Be the change you want to see.

load more comments (2 replies)
[-] passepartout@feddit.de 117 points 6 months ago

Shoutout to this guy for maintaining my mainboards temperature sensors and pwn fan headers: https://github.com/Fred78290/nct6687d

Without this and https://github.com/codifryed/coolercontrol my PC was either a jet engine from the sounds or a nuclear reactor from heat constipation.

[-] tburkhol@lemmy.world 40 points 6 months ago

Fred78290 is the man. Much better than Fred78920

[-] rob_t_firefly@lemmy.world 38 points 6 months ago* (last edited 6 months ago)

Of course he's better, he's a whole 630 Freds above the other one.

load more comments (1 replies)
[-] 9488fcea02a9@sh.itjust.works 31 points 6 months ago

Some dude wrote a driver for the temp sensors on my motherboard... Then quit maintining it because people were being shitty

https://github.com/a1wong/it87

DRIVER REMOVAL NOTICE ===================== I have been unable to meet support demands for this driver, resulting in unpleasant experience and frustration for everyone involved. Consequently, the driver will be removed from github, effective August 1, 2018. Interested parties are encouraged to clone the driver before that time and to start maintaining it on their own.

load more comments (3 replies)
load more comments (5 replies)
[-] dan@upvote.au 94 points 6 months ago

A lot of Linux drivers are like this - just one or two people maintaining them. They usually eventually mainline the driver rather than having a separate Git repo though.

[-] 0x4E4F@lemmy.dbzer0.com 48 points 6 months ago* (last edited 6 months ago)

It's mind boggling just thinking that things like this depend on the effort of one or two guys... while on the other hand, it's not so uncommon that a team of engineers and developers fails to deliver a working (mostly) bugfree product.

I think management is who is responsible for the shitty decisions, as always... and, in general, just holding the team back.

[-] stoicmaverick@lemmy.world 35 points 6 months ago
[-] 0x4E4F@lemmy.dbzer0.com 14 points 6 months ago

What's the deal with Nebraska? Are people from there like really polite and helpful?

[-] Revan343@lemmy.ca 25 points 6 months ago

There's nothing to do in Nebraska except drink and maintain Linux drivers

load more comments (1 replies)
[-] bingbong@lemmy.dbzer0.com 14 points 6 months ago* (last edited 6 months ago)

It's just a random location that was chosen for the joke, it's in the middle of nowhere

load more comments (5 replies)
[-] dan@upvote.au 15 points 6 months ago* (last edited 6 months ago)

The thing with drivers is that the hardware they're written for doesn't really change. A particular network card is always going to behave the same way. Once the driver works well, it's pretty much complete, and the only changes that are needed are bug fixes, updates to handle new firmware, or adjustments if the kernel changes some implementation detail of how drivers are used. There could be months or years between updates to the driver.

Some manufacturers have great first-party Linux support. Intel is a good example - they contribute a lot of code to the kernel, and their drivers are maintained by employees.

load more comments (5 replies)
[-] Hjalamanger@feddit.nu 77 points 6 months ago

There's such a lot of those heroes! I have some weird USB WiFi thing and there's someone maintaining a driver for it!

[-] Ibaudia@lemmy.world 15 points 6 months ago

Yo I'm looking for something like that right now for Linux, what's the name of it??

[-] furycd001@lemmy.ml 60 points 6 months ago

Had some problems while trying to compile and install a WiFi driver for the first time. Managed to find the email of the driver's creator and sent them a message. They responded a few hours later with incredibly helpful guidance, walking me through the process and enabling me to get it working, all while gaining valuable insights....

[-] z00s@lemmy.world 17 points 6 months ago

This is the way

[-] pat277@sh.itjust.works 55 points 6 months ago

Its these kind of people that give me hope

[-] 0x4E4F@lemmy.dbzer0.com 40 points 6 months ago

To be honest, yes. In general, not just tech or Linux related stuff. You look at humanity and what it has come down to, and then you notice these people... and hope fills your heart again.

[-] CosmicTurtle@lemmy.world 26 points 6 months ago

The vast majority of my open source projects, I'm the only user. I release it open source because back in the day, GitHub only allowed open source projects if you want to use it.

But another reason is the hope that someone will find it helpful. If not the project itself but maybe the code.

I have one project that has a significant following and honestly it's sometimes very scary because I might not want to keep it updated because of my own interests changing.

load more comments (1 replies)
load more comments (1 replies)
[-] blackjam_alex@lemmy.world 52 points 6 months ago

This is the link to the GitHub repository https://github.com/morrownr/8812au-20210629 Give them a star.

(I also looked for a donation link, but couldn't find one.)

[-] user224 40 points 6 months ago

And shoutout for this one too: https://github.com/tomaspinho/rtl8821ce

Otherwise I wouldn't have a functional WiFi card either.

[-] sirnuke@lemmy.dbzer0.com 25 points 6 months ago

Send your thanks directly to the maintainer (preferably email/mastadon/twitter/etc, not a ticket)! Open source maintainers don't get a lot of positive direct feedback.

[-] Petter1@lemm.ee 15 points 6 months ago

And if you have some coins to spare, don’t hesitate to donate 😊 it’s hard spending time for no money in this world right now.

load more comments (1 replies)
[-] cogman@lemmy.world 36 points 6 months ago

One of the best parts about Linux. So much is open source which means your 20 year old hardware still likely has support.

[-] bjorney@lemmy.ca 13 points 6 months ago

Unfortunately, the RTL8812AU isn't 20 year old hardware (then it might get a pass) - it's current gen stuff

[-] glibg10b@lemmy.ml 32 points 6 months ago
load more comments (2 replies)
[-] slazer2au@lemmy.world 31 points 6 months ago

Does he live in Nebraska?

[-] Zuberi@lemmy.dbzer0.com 24 points 6 months ago

A god among men

[-] Emerald@lemmy.world 20 points 6 months ago* (last edited 6 months ago)

Oh hey I have the same wifi card series (little usb dongle thingy). I use the aircrack drivers when i use it. https://github.com/aircrack-ng/rtl8812au

[-] KSPAtlas@sopuli.xyz 20 points 6 months ago

Shoutout to whoever maintained my wifi drivers before i switched to ethernet (i forgot who they are lol)

load more comments
view more: next ›
this post was submitted on 28 Jan 2024
1622 points (99.2% liked)

linuxmemes

20351 readers
970 users here now

I use Arch btw


Sister communities:

Community rules

  1. Follow the site-wide rules and code of conduct
  2. Be civil
  3. Post Linux-related content
  4. No recent reposts

Please report posts and comments that break these rules!

founded 1 year ago
MODERATORS