DIY

You can probably figure out how, but actually performing the work entirely alone is going to suck. Even if just to move the large pieces around and hold/lift them in place; you're going to want a friend to help out.

Boy is this exactly the sort of "go down to that parking lot and hire a couple of 'Mexicans' (whatever country they really come from)" scenario that Trump is ruining in the US.

Should you live somewhere else, there's probably unskilled day workers who would hold the other end for a pittance and a lunch, and skilled day workers who would be more expensive but would have the whole thing done by lunchtime if you'd just get out of the way, dinnertime if you help.

I say crack that box, and/or look online to find the instructions. If you know how to do what's required, hire the cheap guy who will just do what you say. Still better than drunk friends who will argue with you. And he needs the money.

There is a couple on YouTube in Alaska that built a large workshop with just the two of them.

I'd put as much together or at least set up by myself like setting up the parts in locations so it is easier to get the steps done, then get day laborers like others suggested. Maybe a scissor lift or boom lift. Most importantly don't touch those metal sheets without good thick gloves or your hands will be sliced open.

I recommend to find some assistance. Even one other person can help immensely at certain points.

I have built a 2-storey shed on a metal frame alone, and it involved highly inconvenient and more than moderately dangerous stages. I would not do it again.

I managed only because I relied heavily on industrial aluminum profiles for machine building (engineer's Lego beams).

Yes. Hopefully everything is cut to size. Cutting metal siding and roofing sucks if you don't have the right tools. Rent them if you need. Best to build this on a concrete slab. The ground will be too uneven, throwing everything off plumb

Probably not. It's not going to be skill issue but no matter how handy you are, you still only have two of them. Not too long ago I watched a video of a guy setting up a single car garage like this on his own and he was struggling immensely.

Get some additional hands, preferably with good brains, too. It'll be hard to e.g. hold a wall frame upright while trying to screw it to the foundation.

You probably can but I'd hire a company to pour the foundation!

Without rigging or a gantry you would likely not be able to do it yourself. Think of what you would want were you constructing this out of long thin toothpicks outside: a gust of wind would move things out of alignment and you would have to leave your current spot to go readjust, that would still happen with the thin aluminum stilts/arches/siding.

That being said if you approach it with that in mind and are prepared to make hangman-style small gantrys or arms to hold things in place while you get to the spot to secure them then you could probably do it on your own over a few days.

If you don't have the instructions don't try to build it from nothing, go look for the same model online and find instructions so you can tell which bolts go where, and to get an idea of what brackets, holding arms, and loose tie-downs you would have to make and use to align things while you move yourself, tools, and ladder around the structure.

If you don't have it already, get some mechanical help for heavy lifting and holding. It's technically possible for a single person to do a lot, but not if they crush themselves trying to hold up something that needs a machine to lift. If it's ever a fight, you need help, whether it's a person or a machine.

I believe in ya. Just dont skimp on the foundations.

This is possible but will take some time and resources for the tooling. Quite a lot of time if you are short on resources.

Try and post! It'll either be a cool DIY project documentation or the fediverse Grover haus. Win win

I think it depends on the size of the building more than anything, and your ability to creatively lift things. Given the size, I think you’ll need help.

If there is sheet metal involved in the roof or siding, wear heavy pants and gloves with wrist guards and cut resistance.

You got this fam. Fly me in if you want a hand

You might be able to do it by yourself, but it would prob be a lot easier if you have a helping hand when spanning the supports.

It also depends on what you're wanting to do with it. If you're just parking a car or a boat in there I've seen people just use a gravel foundation with concrete footers. But, if you are wanting to make it a functional workspace you may want to pour an actual foundation.

Years ago I assembled a small metal shed like 8x8 maybe, but this looks much larger so you should probably get help.

Make sure there's absolutely no wind. Those one-handed clamps and temporary lumber for bracing really come in really handy. You'll probably also want to get the foundation totally complete first, so you can then get the structure all assembled in one day. A lot of metal structures are essentially membrane structures, which aren't strong until they are complete, so you don't want to leave it overnight partially complete.

Looking at the picture on the box, you're really going to want some help, or a tractor with a loader, or something. It's possible if you are supposed to assemble trusses and then lift them into place that will be really difficult by yourself.

You can do it yourself and regret for the rest of your life that you didn't have at least one helping hand.
You'll regret it whilst doing it too, and you'll have dozens of new words to call yourself!

Need 2 people plus a lift

That's what the spouse is for 😉

Just a little more angel! /s

Can you? Probably. Should you? Determines if you’re someone who can finish a project - this coming from someone in his 10th year of a house renovation. Should you with guidance? Probably Should you with helpers? Absolutely- holding stuff up in place and trying to screw it in alone is damn difficult.

I know people who have built bigger buildings by themselves. They work construction for a day job so they have a lot of experience and tools. Still it absolutely is possible.

That said, there will be times that help makes things easier. So if you can get some - even for a few hours - plan a head so help is there for the hard parts. (in my experience "Free" help works for beer: buy the good stuff, but not enough to get them drunk).

Lacking help, doing this yourself is about the tools. Cranes can be rigged up - ropes and pulleys. Your local rental center will often have tools you really need. Don't work on windy days, those panels can catch enough wind to turn into a hang glider (when they come down the panel is destroyed and you have broken bones)

I vote yes! Umm, how big is it, anyway?